guru at unixarea.de
Sun Jul 3 16:51:25 UTC 2011
El día Sunday, July 03, 2011 a las 06:03:35PM +0200, _ escribió:
> Hi List,
> I can't get my WLAN (WPA) to work and I am somewhat at a loss, as to what
> else to try...
> The /etc/rc.conf portion looks like this:
> ifconfig_wi0="WPA DHCP"
> My /etc/wpa_supplicant.conf looks like this:
> The above should be fine in terms of how it is set up.
> Invoking ifconfig on the interface tells me that it is connected, however,
> there's still no internet connection.
> # ifconfig wi0
> wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 00:02:2d:0f:4f:99
> inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
> media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps)
> status: associated
> ssid WLAN-5C7E88 channel 11 (2462 Mhz 11b) bssid 88:25:2c:5c:7e:38
> stationname "FreeBSD WaveLAN/IEEE node"
> authmode WPA1+WPA2/802.11i privacy MIXED deftxkey UNDEF bmiss 7
> scanvalid 60 roaming MANUAL
You are well associated to the AP, but don't have an IP addr;
does the AP supports DHCP, i.e. is willing to give you an IP addr? maybe
your MAC addr must be known by the AP; check with the Admin of the AP;
also check with 'ps ax | fgrep dhc' if you run the DHCP client, if not
force this by hand with:
# dhclient wi0
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <guru at unixarea.de> - w http://www.unixarea.de/
More information about the freebsd-questions