No sound from S/PDIF Output of ESI Juli@ (Envy24HT) card?
Jud
judmarc at fastmail.fm
Wed Dec 28 02:26:56 UTC 2011
I can't seem to get volume from the S/PDIF (digital coaxial) output of
my ESI Juli@ sound card. Running a recent version of 8.2-STABLE.
Here's what appears to me to be the relevant part of dmesg (full dmesg
appended below):
pcm0: <Envy24HT audio (ESI Juli@)> port 0xec00-0xec1f,0xe880-0xe8ff irq
16 at device 0.0 on pci8
pcm0: [GIANT-LOCKED]
pcm0: [ITHREAD]
pcm0: system configuration
SubVendorID: 0x3031, SubDeviceID: 0x4553
XIN2 Clock Source: 24.576MHz(96kHz*256)
MPU-401 UART(s) #: 1
ADC #: 1
DAC #: 1
Multi-track converter type: I2S(with volume, 192KHz support, 24bit
resolution, ID#0x0)
S/PDIF(IN/OUT): 1/1 ID# 0x00
GPIO(mask/dir/state): 0x7fff9f/0x7fff9f/0x8016
/boot/loader.conf contains
snd_envy24ht_load="YES"
The light on my digital-to-audio converter that is fed by the Juli@
coaxial connection is on, indicating it is receiving a signal. The same
is true in Win 7 and Ubuntu 11.10, where I do get sound. Mixer shows
vol, pcm and line all set to 100:100.
cat /dev/sndstat shows
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm0: <Envy24HT audio (ESI Juli@)> (play/rec) default
pcm1: <USB audio> (rec)
Would someone be kind enough to help me determine what I'm not doing
correctly or doing wrong?
Thanks,
Jud
$ dmesg
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #0: Wed Nov 30 11:58:00 EST 2011
jud at jud.dyndns.org:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (4945.11-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Family = 6 Model = 1a
Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 12884901888 (12288 MB)
avail memory = 12353847296 (11781 MB)
ACPI APIC Table: <092011 APIC1949>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <092011 XSDT1949> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci0: <Marvell AHCI controller> port
0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f
mem 0xf7eff800-0xf7efffff irq 28 at device 0.0 on pci1
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 8 6Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
ata8: <ATA channel 6> on atapci0
ata8: [ITHREAD]
ata9: <ATA channel 7> on atapci0
ata9: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <serial bus, USB> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem
0xf8000000-0xf9ffffff,0xd8000000-0xdfffffff,0xd4000000-0xd7ffffff irq 24
at device 0.0 on pci3
nvidia0: <GeForce GTX 460> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
pci3: <multimedia, HDA> at device 0.1 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver
attached)
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x9c00-0x9c1f mem
0xf7de0000-0xf7dfffff,0xf7ddf000-0xf7ddffff irq 22 at device 25.0 on
pci0
em0: Using an MSI interrupt
em0: [FILTER]
em0: Ethernet address: 20:cf:30:54:35:d0
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x9480-0x949f
irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x9800-0x981f
irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x9880-0x989f
irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem
0xf7dde000-0xf7dde3ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci7: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci6: <ACPI PCI bus> on pcib6
fwohci0: <1394 Open Host Controller Interface> port 0xd800-0xd8ff mem
0xfbeff000-0xfbeff7ff irq 19 at device 0.0 on pci6
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:1f:c6:00:00:02:d2:9d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1f:c6:02:d2:9d
fwe0: Ethernet address: 02:1f:c6:02:d2:9d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1f:c6:00:00:02:d2:9d @ 0xfffe00000000, S400,
maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x4dc4000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=1,
CYCLEMASTER mode
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib7
atapci1: <JMicron JMB363 UDMA133 controller> port
0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f
mem 0xfbdfe000-0xfbdfffff irq 16 at device 0.0 on pci5
atapci1: [ITHREAD]
atapci2: <AHCI SATA controller> on atapci1
atapci2: [ITHREAD]
atapci2: AHCI v1.00 controller with 2 3Gbps ports, PM supported
ata10: <ATA channel 0> on atapci2
ata10: [ITHREAD]
ata11: <ATA channel 1> on atapci2
ata11: [ITHREAD]
ata12: <ATA channel 0> on atapci1
ata12: [ITHREAD]
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x9000-0x901f
irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x9080-0x909f
irq 21 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x9400-0x941f
irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem
0xf7ddd000-0xf7ddd3ff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcm0: <Envy24HT audio (ESI Juli@)> port 0xec00-0xec1f,0xe880-0xe8ff irq
16 at device 0.0 on pci8
pcm0: [GIANT-LOCKED]
pcm0: [ITHREAD]
pcm0: system configuration
SubVendorID: 0x3031, SubDeviceID: 0x4553
XIN2 Clock Source: 24.576MHz(96kHz*256)
MPU-401 UART(s) #: 1
ADC #: 1
DAC #: 1
Multi-track converter type: I2S(with volume, 192KHz support, 24bit
resolution, ID#0x0)
S/PDIF(IN/OUT): 1/1 ID# 0x00
GPIO(mask/dir/state): 0x7fff9f/0x7fff9f/0x8016
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci3: <Intel ICH10 SATA300 controller> port
0x8880-0x8887,0x8800-0x8803,0x8480-0x8487,0x8400-0x8403,0x8080-0x809f
mem 0xf7dd7000-0xf7dd77ff irq 20 at device 31.2 on pci0
atapci3: [ITHREAD]
atapci3: AHCI called from vendor specific driver
atapci3: AHCI v1.20 controller with 6 3Gbps ports, PM supported
ata13: <ATA channel 0> on atapci3
ata13: [ITHREAD]
ata14: <ATA channel 1> on atapci3
ata14: [ITHREAD]
ata15: <ATA channel 2> on atapci3
ata15: [ITHREAD]
ata16: <ATA channel 3> on atapci3
ata16: [ITHREAD]
ata17: <ATA channel 4> on atapci3
ata17: [ITHREAD]
ata18: <ATA channel 5> on atapci3
ata18: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
qpi0: <QPI system bus> on motherboard
pcib9: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib9
orm0: <ISA Option ROM> at iomem 0xd1000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est4 attach returned 6
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est6 attach returned 6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) (me)
firewire0: bus manager 1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad4: 244198MB <C300 CTFDDAC256MAG 0007> at ata2-master UDMA100 SATA
6Gb/s
GEOM: ad4: partition 4 does not start on a track boundary.
GEOM: ad4: partition 4 does not end on a track boundary.
GEOM: ad4: partition 3 does not start on a track boundary.
GEOM: ad4: partition 3 does not end on a track boundary.
GEOM: ad4: partition 2 does not start on a track boundary.
GEOM: ad4: partition 2 does not end on a track boundary.
GEOM: ad4: partition 1 does not start on a track boundary.ugen0.1:
<Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
GEOM: ad4: partition 1 does not end on a track boundary.
acd0: DVDR <HL-DT-ST BD-RE WH10LS30/1.00> at ata13-master UDMA100 SATA
1.5Gb/s
acd1: DVDR <HL-DT-ST BD-RE WH10LS30/1.00> at ata15-master UDMA100 SATA
1.5Gb/s
ad34: 238475MB <HDT722525DLA380 V44OA80A> at ata17-master UDMA100 SATA
1.5Gb/s
ad36: 238475MB <HDT722525DLA380 V44OA80A> at ata18-master UDMA100 SATA
1.5Gb/s
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1
usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7 usbus3
ugen6.2: <Microsoft> at usbus6
ukbd0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev
2.00/1.73, addr 2> on usbus6
kbd2 at ukbd0
uhid0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev
2.00/1.73, addr 2> on usbus6
ugen3.2: <Guillemot Corporation> at usbus3
Trying to mount root from ufs:/dev/ad4s4a
ugen0.2: <Broadcom> at usbus0
uhub8: <Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 2> on usbus0
ugen6.3: <Logitech> at usbus6
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/46.00, addr 3> on
usbus6
ums0: 16 buttons and [XYZT] coordinates ID=0
uhid1: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/46.00, addr 3> on
usbus6
ugen2.2: <Logitech> at usbus2
uhid2: <Logitech Logitech Cordless RumblePad 2, class 0/0, rev
1.10/2.00, addr 2> on usbus2
uhub8: 3 ports with 0 removable, bus powered
ugen0.3: <vendor 0x0a5c> at usbus0
ukbd1: <vendor 0x0a5c product 0x4502, class 0/0, rev 2.00/1.00, addr 3>
on usbus0
kbd3 at ukbd1
uaudio0: <Guillemot Corporation Hercules Dualpix Chat and Show Webcam,
class 239/2, rev 2.00/1.00, addr 2> on usbus3
uaudio0: No playback!
uaudio0: Record: 16000 Hz, 1 ch, 16-bit S-LE PCM format
uaudio0: No midi sequencer
pcm1: <USB audio> on uaudio0
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
ugen0.4: <vendor 0x0a5c> at usbus0
ums1: <vendor 0x0a5c product 0x4503, class 0/0, rev 2.00/1.00, addr 4>
on usbus0
ums1: 3 buttons and [XY] coordinates ID=2
ugen0.5: <Broadcom Corp> at usbus0
ubt0: <Broadcom Corp BCM92046DG-CL1ROM, class 224/1, rev 2.00/8.18, addr
5> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
em0: link state changed to UP
--
"I'd take the awe of understanding over the awe of ignorance any day." - Douglas Adams
More information about the freebsd-questions
mailing list