Resetting bootloader on a CF

[bsd]

Hi, 

I am trying to reset the bootloader of a pfSense nanoBSD CF card. 

I need the boot loader to be reset because 

> The embedded image set the bootloader to use a serial console.  That isn't necessary with the box I am trying to use (the BIOS does console redirection to the serial port for you) and causes the boot to hang.


Part of the solution seems to be : 

1. Mount the CF on a FBSD 
2. Initialize the bootloader with : 

# fdisk -B /dev/<disk>

3. This is where I need you help… 


How can I re-install a boot loader ? 

Should I use the command : 

# fdisk -B -b /boot/boot0 device


Any other suggestion, guidance will be welcome. 


Thanks for your support. 


P.S. I'll check your answer in 10+ hours as I am already tired and It is 11.45 pm in Paris where I leave. ;-) - thanks for your understanding. 

––––––––––––––––––––––––––––––––––––––––––––––
---------> Grégory Bernard Director <---------
---------------> www.osnet.eu <---------------
--> Your provider of OpenSource appliances <--
––––––––––––––––––––––––––––––––––––––––––––––
OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO