Help with Booting
Erich Dollansky
erichfreebsdlist at ovitrap.com
Sat Apr 23 06:46:32 UTC 2011
Hi,
On Saturday 23 April 2011 12:57:32 Doug Hardie wrote:
>
> On 22 April 2011, at 21:28, Erich Dollansky wrote:
>
> > It looks to me that not even the loader loads. Is this true?
> >
> I am not sure. The last message is the timestamp from the original distribution build. Then is a line with just the '/' character that should spin a bit. It doesn't.
>
> By playing around a bit I got it a bit farther. I took one of the raid disks and mounted it in a different system. I did an install on it but without changing the label other than to use all the disk. Then I put it back in the production system and booted. It appears to retain the RAID characteristics, but all I get is a '-' at the top left of the screen. I then plugged in the memstick image and booted from that. Right after the last DOS window I pressed F10 which took me to a FreeBSD boot line with the default pointing to ad0. I used 0:ad(4,a)/boot/loader and it went on to the same point as before, but then a bit farther. I now see:
>
this is all to weird for me. Could you install a disk not using the raid hardware?
It would then exclude the motherboard as the cause.
Erich
> Loading /boot/defaults/loader.conf
> /boot/kernel/kernel text=0x8ffac1 |
>
> The '|' normally spins a couple of times and moves on to the next section. However, its hung there now.
>
>
> >
> > On Saturday 23 April 2011 05:38:41 Doug Hardie wrote:
> >> I have an AMD based system that is driving me nuts. I am trying to install 8.2 on it but can't get past the first boot. I had a system up and running on it before, but I had to remove a drive and do the install on another computer. That worked, but now I need to use the built in RAID hardware. As best as I can tell I am going to have to install on the the actual hardware. Motherboard is an Arima NM46X. The machine appears to be about 6 years old.
> >>
> >> I have tried to boot the install disk, the live filesystem disk, and the memstick image for FreeBSD 7.0 through 8.2. All of them do exactly the same thing:
> >>
> >> Bootstart starts.
> >>
> >> BTX loader lists the drives and memory
> >>
> >> FreeBSD bootstrap loader version 1.1 starts. I get the build date and then a new line with just a '/' on it. It never begins to spin. No additional I/O occurs with the boot device.
> >>
> >> The memstick and CDs are good. They boot just fine on another computer, just not this one. I have had to work around CD issues in the past, but I thought the memstick would work if the BIOS would recognize it and boot from it. It recognizes it and tries to boot. I need some ideas here as the RAID is essential for this application. Thanks,
> >>
> >>
> >> _______________________________________________
> >> freebsd-questions at freebsd.org mailing list
> >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> >> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> >>
> >>
> >
>
>
>
More information about the freebsd-questions
mailing list