Unable to access CDROM device to play music

Carmel carmel_ny at hotmail.com
Sat Sep 25 13:59:47 UTC 2010


On Sat, 25 Sep 2010 12:51:16 +0000
Paul B Mahol <onemda at gmail.com> articulated:

> what is mixer output?
> what sound driver are you using?

From the kernel file:

## SOUND
device          sound           # Install sound driver support
device          snd_hda         # nVidia MCP51 sound driver

Via mixer:

$ mixer
Mixer vol      is currently set to  90:90
Mixer pcm      is currently set to  42:45
Mixer speaker  is currently set to 100:100
Mixer line     is currently set to 100:100
Mixer mic      is currently set to   0:0
Mixer cd       is currently set to 100:100
Mixer mix      is currently set to   0:0
Mixer rec      is currently set to  75:75
Mixer igain    is currently set to   0:0
Recording source: mic

Via pciconf -lv

hdac0 at pci0:3:0:1:	class=0x040300 card=0x00000000 chip=0x0be210de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = multimedia
    subclass   = HDA

I attached the "dmesg" output. I don't know if that works on this list
or not. I can always supply if separately. What bugs me is that this use
to work before I upgraded my system.

-- 
Carmel ✌
carmel_ny at hotmail.com

-------------- next part --------------
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE #0: Wed Sep 22 21:21:36 EDT 2010
    gerard at cyborg.creedmoor.net:/usr/obj/usr/src/sys/CYBORG amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.16-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Family = f  Model = 4b  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
real memory  = 4294967296 (4096 MB)
avail memory = 4084535296 (3895 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bfef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci3
nvidia0: <GeForce GT 220> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
hdac0: <NVidia (Unknown) High Definition Audio Controller> mem 0xfcffc000-0xfcffffff irq 16 at device 0.1 on pci3
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 11.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 11.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 23 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 20 at device 15.0 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <simple comms> at device 7.0 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0x9800-0x987f mem 0xfdcff000-0xfdcff7ff irq 19 at device 9.0 on pci4
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0a:e6:ff:65:1e:1b
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x2554000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:0a:65:1e:1b
fwe0: Ethernet address: 02:00:0a:65:1e:1b
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:0a:e6:ff:65:1e:1b @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
hdac1: <NVidia MCP51 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 21 at device 16.1 on pci0
hdac1: HDA Driver Revision: 20100226_0142
hdac1: [ITHREAD]
nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xc800-0xc807 mem 0xfe02b000-0xfe02bfff irq 22 at device 20.0 on pci0
miibus0: <MII bus> on nfe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nfe0: Ethernet address: 00:19:21:5d:34:de
nfe0: [FILTER]
amdtemp0: <AMD K8 Thermal Sensors> on hostb3
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ad0: 238475MB <WDC WD2500BB-22RDA0 20.00K20> at ata0-master UDMA100 
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ad1: 238475MB <WDC WD2500AAJB-00J3A0 01.03E01> at ata0-slave UDMA133 
acd0: DVDR <PHILIPS DVD8801/GW02> at ata1-master UDMA33 
hdac0: HDA Codec #0: NVidia (Unknown)
hdac0: HDA Codec #1: NVidia (Unknown)
hdac0: HDA Codec #2: NVidia (Unknown)
hdac0: HDA Codec #3: NVidia (Unknown)
pcm0: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 0 nid 1 on hdac0
pcm1: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 1 nid 1 on hdac0
pcm2: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 2 nid 1 on hdac0
pcm3: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 3 nid 1 on hdac0
hdac1: HDA Codec #1: Realtek ALC883
pcm4: <HDA Realtek ALC883 PCM #0 Analog> at cad 1 nid 1 on hdac1
pcm5: <HDA Realtek ALC883 PCM #1 Analog> at cad 1 nid 1 on hdac1
pcm6: <HDA Realtek ALC883 PCM #2 Digital> at cad 1 nid 1 on hdac1
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus1 usbus0
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 8 ports with 8 removable, self powered
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
Root mount waiting for: usbus1
Trying to mount root from ufs:/dev/ad0s1a
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata1:0:0:0): CAM status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI status: Check Condition
(probe0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <PHILIPS DVD8801 GW02> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ugen0.2: <Microsft> at usbus0
ukbd0: <Microsft Microsoft Wireless Desktop Receiver 3.1, class 0/0, rev 2.00/0.02, addr 2> on usbus0
kbd2 at ukbd0
ums0: <Microsft Microsoft Wireless Desktop Receiver 3.1, class 0/0, rev 2.00/0.02, addr 2> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=17
ums0: 0 buttons and [ZT] coordinates ID=0
ugen0.3: <vendor 0x058f> at usbus0
umass0: <vendor 0x058f USB Reader, class 0/0, rev 1.10/1.00, addr 3> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:2:0:-1: Attached to scbus2
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da1 at umass-sim0 bus 0 scbus2 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0 
(probe0:umass-sim0:0:0:2): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI status: Check Condition
(probe0:umass-sim0:0:0:2): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da2 at umass-sim0 bus 0 scbus2 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0 
(probe0:umass-sim0:0:0:3): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI status: Check Condition
(probe0:umass-sim0:0:0:3): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da3 at umass-sim0 bus 0 scbus2 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present



More information about the freebsd-questions mailing list