Single user mode: no shell prompt

Martin Schweizer lists_freebsd at bluewin.ch
Wed Oct 20 07:51:01 UTC 2010


Hello

If I start the server in single user mode I get never a prompt/shell (at the console). After successfully boot in single user mode I see a the last line:
"Trying to mount root from ufs:/dev/mfid0s1a". The only thing I can do is CTRL-ALT-DEL, then the system reboots as usual (with no broken file system). 
All works well in multi user mode. I have no other problems with this server. Attached you find the /var/run/dmesg.boot. Any ideas are welcome.


Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #1: Sun Oct 17 12:46:44 CEST 2010
    martin at firewall.acutronic.ch:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz (1605.51-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f7  Family = 6  Model = f  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4e33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 4077580288 (3888 MB)
ACPI APIC Table: <INTEL  S5000PAL>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000PAL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3020-0x303f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:04:23:d9:9a:42
em1: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3000-0x301f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:04:23:d9:9a:43
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib10
mfi0: <LSI MegaSAS 1078> port 0x2000-0x20ff mem 0xb8b00000-0xb8b3ffff,0xb8b40000-0xb8b7ffff irq 16 at device 0.0 on pci10
mfi0: Megaraid SAS driver Ver 3.00 
mfi0: 45159 (340875603s/0x0020/info) - Shutdown command received from host
mfi0: 45160 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/100a/8086)
mfi0: 45161 (boot + 3s/0x0020/info) - Firmware version 1.12.172-0470
mfi0: 45162 (boot + 4s/0x0008/info) - Battery started charging
mfi0: 45163 (boot + 4s/0x0008/info) - Battery temperature is normal
mfi0: 45164 (boot + 4s/0x0008/WARN) - Battery requires reconditioning; please initiate a LEARN cycle
mfi0: 45165 (boot + 4s/0x0008/info) - Battery Present
mfi0: 45166 (boot + 4s/0x0020/info) - Board Revision 
mfi0: 45167 (boot + 15s/0x0002/info) - Unexpected sense: PD 113(e0x00/s19) Path 500600b0007ffe20 , CDB: 12 01 83 00 60 00, Sense: 70 00 05 00 00 00 00 1d 00 
00 00 00 
mfi0: 45168 (boot + 15s/0x0004/info) - Enclosure (SES) discovered on PD 0b(c None/p1)
mfi0: 45169 (boot + 15s/0x0002/info) - Inserted: Encl PD 0b
mfi0: 45170 (boot + 15s/0x0002/info) - Inserted: PD 0b(c None/p1) Info: enclPd=0b, scsiType=d, portMap=09, sasAddr=500600b0007ffe20,0000000000000000
mfi0: 45171 (boot + 15s/0x0002/info) - Inserted: PD 0c(e0x0b/s2)
mfi0: 45172 (boot + 15s/0x0002/info) - Inserted: PD 0c(e0x0b/s2) Info: enclPd=0b, scsiType=0, portMap=02, sasAddr=0b221d1459787e35,0000000000000000
mfi0: 45173 (boot + 15s/0x0002/info) - Inserted: PD 0d(e0x0b/s0)
mfi0: 45174 (boot + 15s/0x0002/info) - Inserted: PD 0d(e0x0b/s0) Info: enclPd=0b, scsiType=0, portMap=00, sasAddr=0b221d1459787440,0000000000000000
mfi0: 45175 (boot + 15s/0x0002/info) - Inserted: PD 0e(e0x0b/s1)
mfi0: 45176 (boot + 15s/0x0002/info) - Inserted: PD 0e(e0x0b/s1) Info: enclPd=0b, scsiType=0, portMap=01, sasAddr=0b221d1459787729,0000000000000000
mfi0: 45177 (boot + 15s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=65,ccp=64,ap=0,dc=1,dbgi=0] from [ID=00,dcp=65,ccp=65,ap=0,dc=1,dbgi=0]
mfi0: 45178 (boot + 45s/0x0008/WARN) - BBU disabled; changing WB virtual disks to WT
mfi0: [ITHREAD]
pcib11: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci0: <base peripheral> at device 8.0 (no driver attached)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x4080-0x409f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x3f00
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4060-0x407f irq 22 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4040-0x405f irq 23 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4020-0x403f irq 22 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib12
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xb7ffffff,0xb8a00000-0xb8a0ffff irq 17 at device 12.0 on pci12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40b0-0x40bf irq 20 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x40c8-0x40cf,0x40e4-0x40e7,0x40c0-0x40c7,0x40e0-0x40e3,0x40a0-0x40af mem 0xb8c00000-0xb8c003ff irq 20 at 
device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xcf000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
device_attach: acpi_perf0 attach returned 6
device_attach: acpi_perf1 attach returned 6
device_attach: acpi_perf2 attach returned 6
device_attach: acpi_perf3 attach returned 6
device_attach: acpi_perf4 attach returned 6
device_attach: acpi_perf5 attach returned 6
device_attach: acpi_perf6 attach returned 6
device_attach: acpi_perf7 attach returned 6
device_attach: acpi_perf0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
device_attach: acpi_perf1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
device_attach: acpi_perf2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
device_attach: acpi_perf3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
device_attach: acpi_perf4 attach returned 6
p4tcc4: <CPU Frequency Thermal Control> on cpu4
device_attach: acpi_perf5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
device_attach: acpi_perf6 attach returned 6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
device_attach: acpi_perf7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
RTC BIOS diagnostic error 5<invalid_time>
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: CDRW <Optiarc CDRWDVD CRX890A/PX03> at ata0-slave UDMA33 
ipmi0: IPMI device rev. 1, firmware rev. 12.2, version 2.0
ipmi0: Number of channels 5
ipmi0: Attached watchdog
mfi0: 45179 (340875679s/0x0020/info) - Time established as 10/20/10  7:41:19; (54 seconds since power on)
mfid0: <MFI Logical Disk> on mfi0
mfid0: 608444MB (1246093312 sectors) RAID volume '' is optimal
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub3: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
mfi0: 45180 (340875759s/0x0008/info) - Battery relearn pending: Battery is under charge
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
ugen4.2: <Intel(R)> at usbus4
umass0: <Intel(R) Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus4
umass0:0:0:-1: Attached to scbus0
umass1: <Intel(R) Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4
umass1:  SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus4
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
umass1:1:1:-1: Attached to scbus1
umass2: <Intel(R) Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
umass2: 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error 
(probe0:umass-sim0:0:0:0): SCSI status: Check ConditionSCSI
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) over 
cd0 at umass-sim0 bus 0 scbus0 target 0 lun 0Bulk-Only
cd0: ; quirks = 0x0000<Intel(R) RMM2 VDrive 1 0.01> Removable CD-ROM SCSI-3 device 

cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(probe1:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe1:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe1:umass-sim1:1:0:0): SCSI status: Check Condition
(probe1:umass-sim1:1:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)umass2:2:2:-1: Attached to scbus2

umass3: <Intel(R) Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4
umass3:  SCSI over Bulk-Only; quirks = 0x0000
(probe1:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe1:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe1:umass-sim1:1:0:0): SCSI status: Check Condition
(probe1:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
umass3:3:3:-1: Attached to scbus3
ums0: <Intel(R) Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4(probe0:umass-sim2:2:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
ums0: 
(probe0:umass-sim2:2:0:0): CAM status: SCSI Status Error3 buttons and [XYZ] coordinates ID=0
(probe0:umass-sim2:2:0:0): SCSI status: Check Condition

(probe0:umass-sim2:2:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
cd1 at umass-sim1 bus 1 scbus1 target 0 lun 0ukbd0: 
cd1: <Intel(R) Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4<Intel(R) RMM2 VDrive 2 0.01> Removable CD-ROM SCSI-3 device 
kbd2 at ukbd0
cd1: 40.000MB/s transfers

cd1: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim2:2:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim2:2:0:0): CAM status: SCSI Status Error
(probe0:umass-sim2:2:0:0): SCSI status: Check Condition
(probe0:umass-sim2:2:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe1:umass-sim3:3:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe1:umass-sim3:3:0:0): CAM status: SCSI Status Error
(probe1:umass-sim3:3:0:0): SCSI status: Check Condition
(probe1:umass-sim3:3:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
cd2 at umass-sim2 bus 2 scbus2 target 0 lun 0
cd2: <Intel(R) RMM2 VDrive 3 0.01> Removable CD-ROM SCSI-3 device 
cd2: 40.000MB/s transfers
cd2: Attempt to query device size failed: NOT READY, Medium not present
(probe1:umass-sim3:3:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe1:umass-sim3:3:0:0): CAM status: SCSI Status Error
(probe1:umass-sim3:3:0:0): SCSI status: Check Condition
(probe1:umass-sim3:3:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd3 at umass-sim3 bus 3 scbus3 target 0 lun 0
cd3: <Intel(R) RMM2 VDrive 4 0.01> Removable CD-ROM SCSI-3 device 
cd3: 40.000MB/s transfers
cd3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/mfid0s1a
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled

Regards,

-- 

Martin Schweizer
<office at pc-service.ch>

PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon
Tel. +41 55 243 30 00; Fax: +41 55 243 33 22



More information about the freebsd-questions mailing list