8.1-rc2 journal overflow error

FRLinux frlinux at gmail.com
Mon Jul 19 13:24:29 UTC 2010


Hello, I am using a hefty server with a single SSD drive as the main
drive (Corsair CMFSSD-64D1). It worked nicely until today where I got
a journal overflow error, i took a screenshot here:
http://picasaweb.google.fr/frlinux/Computers#5495597160219915298

I am using a RAID array on a 3ware card (twa0: INFO: (0x15: 0x1300):
Controller details:: Model 9650SE-24M8, 24 ports, Firmware FE9X
4.10.00.007, BIOS BE9X 4.08.00.002) where I have (12 drives attached
to it). The RAID array seems healthy.

I am using journal on the unit :

GEOM_JOURNAL: Journal 3769207394: da0 contains data.
GEOM_JOURNAL: Journal 3769207394: da0 contains journal.
Root mount waiting for: GJOURNAL
GEOM_JOURNAL: Journal da0 consistent.

I have googled for a solution but have failed to find any. This server
is a clean install of 8.1-rc2 where it used to host 7.2-RELEASE which
was fairly stable (hardly a crash).

So in short, anything I can do to help debug this problem? (dmesg below)

Cheers,
Steph

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RC2 #0: Tue Jun 29 20:21:55 UTC 2010
    root at mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz (2004.98-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40ce33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 8589934592 (8192 MB)
avail memory = 8226881536 (7845 MB)
ACPI APIC Table: <INTEL  S5000PSL>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000PSL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
3ware device driver for 9000 series storage controllers, version: 3.70.05.001
twa0: <3ware 9000 series Storage Controller> port 0x3000-0x30ff mem
0xb8000000-0xb9ffffff,0xba900000-0xba900fff irq 16 at device 0.0 on
pci3
twa0: [ITHREAD]
twa0: INFO: (0x04: 0x0053): Battery capacity test is overdue:
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-24M8, 24
ports, Firmware FE9X 4.10.00.007, BIOS BE9X 4.08.00.002
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x2020-0x203f
mem 0xba820000-0xba83ffff,0xba400000-0xba7fffff irq 18 at device 0.0
on pci4
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:82:b3:b8
em1: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x2000-0x201f
mem 0xba800000-0xba81ffff,0xba000000-0xba3fffff irq 19 at device 0.1
on pci4
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:82:b3:b9
pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 3.0 on pci0
pci6: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 7.0 on pci0
pci10: <PCI bus> on pcib10
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib11
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0x40a0-0x40bf irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0x4080-0x409f irq 22 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0x4060-0x407f irq 23 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port
0x4040-0x405f irq 22 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xbac00400-0xbac007ff
irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib12
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem
0xb0000000-0xb7ffffff,0xbab00000-0xbab0ffff irq 17 at device 12.0 on
pci12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 20 at device
31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port
0x40d8-0x40df,0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x403f
mem 0xbac00000-0xbac003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 6 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci1
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xcb000-0xccfff,0xcd000-0xcdfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
p4tcc2: <CPU Frequency Thermal Control> on cpu2
p4tcc3: <CPU Frequency Thermal Control> on cpu3
RTC BIOS diagnostic error 5<invalid_time>
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: DVDR <TSSTcorp CDDVDW SN-S082H/SB01> at ata0-master UDMA33
ad6: 61057MB <Corsair CMFSSD-64D1 1.0> at ata3-master UDMA100 SATA 3Gb/s
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
da0 at twa0 bus 0 scbus0 target 0 lun 0
da0: <AMCC 9650SE-24M DISK 4.10> Fixed Direct Access SCSI-5 device
da0: 100.000MB/s transfers
da0: 4768320MB (9765519360 512 byte sectors: 255H 63S/T 607875C)
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
GEOM_JOURNAL: Journal 3769207394: da0 contains data.
GEOM_JOURNAL: Journal 3769207394: da0 contains journal.
Root mount waiting for: GJOURNAL
ugen0.2: <vendor 0x0d3d> at usbus0
ukbd0: <EP1> on usbus0
kbd2 at ukbd0
ums0: <EP2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Root mount waiting for: GJOURNAL
Root mount waiting for: GJOURNAL
Root mount waiting for: GJOURNAL
Root mount waiting for: GJOURNAL
GEOM_JOURNAL: Journal da0 consistent.
Trying to mount root from ufs:/dev/ad6s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 212 files 1


More information about the freebsd-questions mailing list