Synchronize cache failed, status == 0x59

[Omer Faruk Sen]

Hi,

I am trying to use a Qlogic 2432 chip based card on FreeBSD 7.1 or
7.2. The SAN storage is IBM DS 4800. I get following error on boot and
can't fdisk the fiber LUN.Following is the dmesg output:

da0 at isp1 bus 0 target 0 lun 2
da0: <IBM 1815      FAStT 0914> Fixed Direct Access SCSI-5 device
da0: 400.000MB/s transfers
da0: Command Queueing Enabled
da0: 20480MB (41943040 512 byte sectors: 255H 63S/T 2610C)
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
(da0:isp1:0:0:2): READ(6)/WRITE(6) not supported, increasing
minimum_cmd_size to 10.
(da0:isp1:0:0:2): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0
(da0:isp1:0:0:2): CAM Status: SCSI Status Error
(da0:isp1:0:0:2): SCSI Status: Check Condition
(da0:isp1:0:0:2): ILLEGAL REQUEST asc:94,1
(da0:isp1:0:0:2): Vendor Specific ASC
(da0:isp1:0:0:2): Unretryable error
(da0:isp1:0:0:2): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
(da0:isp1:0:0:2): CAM Status: SCSI Status Error
(da0:isp1:0:0:2): SCSI Status: Check Condition
(da0:isp1:0:0:2): ILLEGAL REQUEST asc:94,1
(da0:isp1:0:0:2): Vendor Specific ASC
(da0:isp1:0:0:2): Unretryable error
isp1: 0.0.2 FCP RESPONSE: 0x2
(da0:isp1:0:0:2): Synchronize cache failed, status == 0x59, scsi status == 0x0
(da0:isp1:0:0:2): READ(10). CDB: 28 0 2 7f ff ff 0 0 1 0
(da0:isp1:0:0:2): CAM Status: SCSI Status Error
(da0:isp1:0:0:2): SCSI Status: Check Condition
(da0:isp1:0:0:2): ILLEGAL REQUEST asc:94,1
(da0:isp1:0:0:2): Vendor Specific ASC
(da0:isp1:0:0:2): Unretryable error
(da0:isp1:0:0:2): READ(10). CDB: 28 0 0 0 0 80 0 0 10 0
(da0:isp1:0:0:2): CAM Status: SCSI Status Error
(da0:isp1:0:0:2): SCSI Status: Check Condition
(da0:isp1:0:0:2): ILLEGAL REQUEST asc:94,1
(da0:isp1:0:0:2): Vendor Specific ASC
(da0:isp1:0:0:2): Unretryable error
(da0:isp1:0:0:2): READ(10). CDB: 28 0 0 0 0 10 0 0 10 0
(da0:isp1:0:0:2): CAM Status: SCSI Status Error
(da0:isp1:0:0:2): SCSI Status: Check Condition
(da0:isp1:0:0:2): ILLEGAL REQUEST asc:94,1
(da0:isp1:0:0:2): Vendor Specific ASC
(da0:isp1:0:0:2): Unretryable error
(da0:isp1:0:0:2): READ(10). CDB: 28 0 0 0 0 0 0 0 10 0
(da0:isp1:0:0:2): CAM Status: SCSI Status Error
(da0:isp1:0:0:2): SCSI Status: Check Condition
(da0:isp1:0:0:2): ILLEGAL REQUEST asc:94,1
(da0:isp1:0:0:2): Vendor Specific ASC
(da0:isp1:0:0:2): Unretryable error
(da0:isp1:0:0:2): READ(10). CDB: 28 0 0 0 2 0 0 0 10 0
(da0:isp1:0:0:2): CAM Status: SCSI Status Error
(da0:isp1:0:0:2): SCSI Status: Check Condition
(da0:isp1:0:0:2): ILLEGAL REQUEST asc:94,1
(da0:isp1:0:0:2): Vendor Specific ASC
(da0:isp1:0:0:2): Unretryable error
(da0:isp1:0:0:2): READ(10). CDB: 28 0 0 0 0 80 0 0 10 0
(da0:isp1:0:0:2): CAM Status: SCSI Status Error
(da0:isp1:0:0:2): SCSI Status: Check Condition
(da0:isp1:0:0:2): ILLEGAL REQUEST asc:94,1
(da0:isp1:0:0:2): Vendor Specific ASC
(da0:isp1:0:0:2): Unretryable error
(da0:isp1:0:0:2): READ(10). CDB: 28 0 0 0 0 10 0 0 10 0
(da0:isp1:0:0:2): CAM Status: SCSI Status Error
(da0:isp1:0:0:2): SCSI Status: Check Condition
(da0:isp1:0:0:2): ILLEGAL REQUEST asc:94,1
(da0:isp1:0:0:2): Vendor Specific ASC
(da0:isp1:0:0:2): Unretryable error

Can someone enlighten me about this  error? What is my err on this issue?

Regards.