ipod nano 3th 8gig

Roy Stuivenberg roys1012 at gmail.com
Wed May 27 11:03:49 UTC 2009


Hello,

Has anyone been able to connect an ipod nano 3th (windows version) ?
Mounting it gives me this error.

rs-unix# mount -t msdosfs /dev/da1s1 /ipod
mount_msdosfs: /dev/da1s1: : Invalid argument

dmesg :

rs-unix# dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #0: Tue May  5 15:39:15 CEST 2009
    amsroy at rs-unix.roycs.nl:/usr/obj/usr/src/sys/GENERIC-ROYCS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz (2331.01-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10677  Stepping = 7

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
real memory  = 2146959360 (2047 MB)
avail memory = 2091622400 (1994 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 16
at device 0.0 on pci1
nvidia0: <GeForce 6200 LE> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at
device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbfffc00-0xfbffffff irq
18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
umass0: <Sunplus Technology Inc. USB to Serial-ATA bridge, class 0/0,
rev 2.00/1.03, addr 2> on uhub3
hdac0: <Intel 82801J High Definition Audio Controller> mem
0xfbff8000-0xfbffbfff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <Marvell 88SX6101 UDMA133 controller> port
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f
mem 0xfeaffc00-0xfeaffdff irq 16 at device 0.0 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
pci2: <network, ethernet> at device 0.0 (no driver attached)
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at
device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at
device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at
device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbfff800-0xfbfffbff irq
23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebffc00-0xfebffcff irq 16 at device 0.0 on pci5
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:10:a7:07:ca:98
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port
0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata3: <ATA channel 0> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port
0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata5: <ATA channel 0> on atapci2
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: [ITHREAD]
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on acpi0
fdc0: [FILTER]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  F1,
should be E8 [20070320]
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ums0: <B16_b_02 USB-PS/2 Optical Mouse, class 0/0, rev 2.00/98.02, addr
2> on uhub4
ums0: 4 buttons and Z dir.
uhub8: <Logitech Logitech G15 Keyboard, class 9/0, rev 1.10/1.03, addr
3> on uhub4
uhub8: 4 ports with 2 removable, bus powered
ukbd0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70,
addr 4> on uhub8
kbd2 at ukbd0
uhid0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70,
addr 4> on uhub8
uhid1: <G15 Keyboard G15 Keyboard, class 0/0, rev 2.00/1.03, addr 5> on
uhub8
uscanner0: <Canon CanoScan, class 255/0, rev 1.10/1.00, addr 2> on uhub5
uhub5: device problem (STALLED), disabling port 2
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
forwarding disabled, default to deny, logging limited to 5 packets/entry
by default
acd0: DVDR <ASUS DRW-1608P3S/1.19> at ata2-slave UDMA66
ad6: 238475MB <WDC WD2500AAJS-22RYA0 12.01B01> at ata3-master SATA300
hdac0: HDA Codec #0: Realtek ALC888
pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac0
pcm3: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac0
GEOM_LABEL: Label for provider ad6s1a is ufsid/4a0041c086962ad9.
GEOM_LABEL: Label for provider ad6s1d is ufsid/4a0041c8c7b5d241.
GEOM_LABEL: Label for provider ad6s1e is ufsid/4a0041c026f323e1.
GEOM_LABEL: Label for provider ad6s1f is ufsid/4a0041c06d8d0c97.
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
acd0: FAILURE - dIaN0 QaUtI RYu maIsLsL-EsGiAmL 0R EbQuUsE S0T
taasrcg=e0tx 02 4l uansc q0=
0dxa00 0s: ks<=F0UxJ4I8T S0Ux 0M0H Y02x16001B
H > Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C)
cd0 at ata2 bus 0 target 1 lun 0
cd0: <ASUS DRW-1608P3S 1.19> Removable CD-ROM SCSI-0 device 
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(probe1:ata2:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe1:ata2:0:1:0): CAM Status: SCSI Status Error
(probe1:ata2:0:1:0): SCSI Status: Check Condition
(probe1:ata2:0:1:0): NOT READY asc:3a,0
(probe1:ata2:0:1:0): Medium not present
(probe1:ata2:0:1:0): Unretryable error
cam_periph_alloc: attempt to re-allocate valid device pass1 rejected
passasync: Unable to attach new device due to status 0x6: CCB request
was invalid
cam_periph_alloc: attempt to re-allocate valid device cd0 rejected
cdasync: Unable to attach new device due to status 0x6
umass1: <Apple Inc. iPod, class 0/0, rev 2.00/0.01, addr 2> on uhub7
GEOM_LABEL: Label for provider da0s1 is ufsid/4951260ad913d084.
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Apple iPod 1.62> Removable Direct Access SCSI-0 device 
da1: 40.000MB/s transfers
da1: 7583MB (1941441 4096 byte sectors: 255H 63S/T 120C)
Trying to mount root from ufs:/dev/ad6s1a
GEOM_LABEL: Label ufsid/4a0041c086962ad9 removed.
GEOM_LABEL: Label for provider ad6s1a is ufsid/4a0041c086962ad9.
GEOM_LABEL: Label ufsid/4a0041c026f323e1 removed.
GEOM_LABEL: Label for provider ad6s1e is ufsid/4a0041c026f323e1.
GEOM_LABEL: Label ufsid/4a0041c06d8d0c97 removed.
GEOM_LABEL: Label for provider ad6s1f is ufsid/4a0041c06d8d0c97.
GEOM_LABEL: Label ufsid/4a0041c8c7b5d241 removed.
GEOM_LABEL: Label for provider ad6s1d is ufsid/4a0041c8c7b5d241.
GEOM_LABEL: Label ufsid/4a0041c086962ad9 removed.
GEOM_LABEL: Label ufsid/4a0041c026f323e1 removed.
GEOM_LABEL: Label ufsid/4a0041c06d8d0c97 removed.
GEOM_LABEL: Label ufsid/4a0041c8c7b5d241 removed.
rl0: link state changed to UP
WARNING: /media/disk-23 was not properly dismounted

Regards,
Roy.



More information about the freebsd-questions mailing list