Kernel compile fails
Manolis Kiagias
sonic2000gr at gmail.com
Sun Mar 22 09:04:40 PDT 2009
"Remorque" wrote:
> On Sun, Mar 22, 2009 at 6:23 PM, Kent Stewart <kstewart at owt.com> wrote:
>
>
>> On Sunday 22 March 2009 07:53:00 am "Remorque" wrote:
>>
>>> I have installed 7.1-RELEASE on a hardware with AMD processor. I have
>>> successfully buildworld, and now doing the "make kernel" thing.The kernel
>>> config file is pretty GENERIC, I only removed the option to build a DEBUG
>>> kernel.I have csup-ped today.
>>> However, my compilation fails, viz:
>>> <cut>
>>> cc -c -O2 -frename-registers -pipe -fno-strict-aliasing -std=c99 -Wall
>>> -Wredundant-decls -Wnested-externs -Wstrict-prototypes
>>> -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -Wundef
>>> -Wno-pointer-sign
>>> -fformat-extensions -nostdinc -I. -I/usr/src/sys
>>> -I/usr/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS
>>>
>> -include
>>
>>> opt_global.h -fno-common -finline-limit=8000 --param
>>>
>> inline-unit-growth=100
>>
>>> --param large-function-growth=1000 -mcmodel=kernel -mno-red-zone
>>> -mfpmath=387 -mno-sse -mno-sse2 -mno-mmx -mno-3dnow -msoft-float
>>> -fno-asynchronous-unwind-tables -ffreestanding -Werror
>>> /usr/src/sys/dev/ath/if_ath.c -I/usr/src/sys/dev/ath
>>> *** Error code 1
>>>
>>> Stop in /usr/obj/usr/src/sys/FS.
>>> *** Error code 1
>>>
>>> Stop in /usr/src.
>>> *** Error code 1
>>>
>>> Stop in /usr/src.
>>>
>>> </cut>
>>>
>>> I can go ahead and comment out all ath_* from the configuration, since I
>>> wouldn't really need them at this juncture, but I believe it should not
>>>
>> be
>>
>>> failing anyway. Do I just wait to csup again tomorrow and hope this gets
>>> fixed? :)
>>>
>> You have optimization options on the compile line that I don't have on my
>> system. From this, I would guess that you have a cflags statment
>> in /etc/make.conf and it is bitting you.
>>
>> Kent
>>
>
>
> Hi Kent,
>
> Thank you for replying.
>
> The fact is that:
>
> 1. I have never used any optimizations ever since I started using FreeBSD
> 2. This is a new box, and there is no /etc/make.conf as yet
>
> The only things I have done on this box (a Dell SC1435) is to install, csup
> (src, ports) and buildworld.
> I was just gonna do the kernel, then start doing the other stuff after the
> system updates.
>
> Your guess is wrong:-)
>
>
If you csup'd source as you say above, you are now on 7-STABLE.
There have been some changes in the atheros driver, and I noticed your
build stopped there.
Look at the new GENERIC conf file:
device ath # Atheros pci/cardbus NIC's
device ath_hal # Atheros HAL (Hardware Access Layer)
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
device ath_rate_sample # SampleRate tx rate control for ath
If your custom configuration file comes from editing a 7.0-RELEASE e.g.
GENERIC, it will fail. Use the newer GENERIC as a starting point, or
simply replace the atheros entries with the ones above.
This change is also documented in /usr/src/UPDATING
More information about the freebsd-questions
mailing list