Xorg - Resolution issues
Francis Dubé
freebsd at optiksecurite.com
Fri Mar 13 07:50:08 PDT 2009
Francis Dubé wrote :
> Hi everyone,
>
> I got this TV :
> http://www.samsung.com/ca/consumer/detail/spec.do?group=tv&type=tv&subtype=lcd&model_cd=LN40A330J1DXZC&fullspec=F
>
>
> I'm trying to use it as my screen under FreeBSD 7.1-RELEASE with a
> resolution of 1366x768 which is suposed to be suported by the TV,
> acording with the TV's specs. I did the same with another very similar
> TV and it was working #1 without having to create any Xorg.conf, a
> plain startx and the display was perfect (1366x768).
>
> With my new TV, X only start in 1280x720. So I created a config file
> with Xorg -configure, then I tried to force Xorg to use 1366x768 but
> it keeps loading in 1280x720. In my Xorg.0.log it looks like there's
> no support for the resolution I want :
>
> [...]
> (==) Using config file: "/etc/X11/xorg.conf"
> [...]
> (II) RADEON(0): Panel infos found from DDC detailed: 1280x720
> [...]
> (II) RADEON(0): Supported additional Video Mode:
> (II) RADEON(0): clock: 74.2 MHz Image Size: 160 x 90 mm
> (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430
> h_blank_end 1650 h_border: 0
> (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking:
> 750 v_border: 0
> (II) RADEON(0): Supported additional Video Mode:
> (II) RADEON(0): clock: 74.2 MHz Image Size: 160 x 90 mm
> (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052
> h_blank_end 2200 h_border: 0
> (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking:
> 562 v_border: 0
> (II) RADEON(0): Ranges: V min: 23 V max: 61 Hz, H min: 26 H max: 68
> kHz, PixClock max 150 MHz
> (II) RADEON(0): Monitor name: SAMSUNG
> [...]
> (II) RADEON(0): Output DVI-0 using initial mode 1280x720
> [...]
>
> This is how i configured my resolution in my /etc/X11/xorg.conf :
> [...]
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1366x768"
> EndSubSection
> EndSection
> [...]
>
> My video card is a Radeon HD 3450 and my Xorg version is xorg-7.3_2
>
> Also, the only other resolution "supported" by the TV according to the
> log file would be 1920x540...but it's not supported by the TV !
>
> Am I missing something ?
>
> Thanks for reading.
>
> Francis
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
I had this problem last month, I tought it was fixed using this little
trick suggested by Polytropon :
Polytropon wrote :
> If it doesn't work, there's always an option to use xrandr via
> ~/.xinitrc:
>
> xrandr --size 1366x768 &
> xrandr --fb 1366x768 &
>
> I have a similar issue with the "ati" driver, using an ATI Radeon 9200
> (RV250) which I need to force to 1400x1050 (worked with old XFree86
> and the setting in the config file, as you mentioned it). The
> autodetection of the screen (21" CRT) leads to stupid values that
> are completely unusable.
The screen is located far from my office so I can't be in front of it to
test, that's why I haven't spotted it wasn't working. I tought it was
because when i take a screenshot with 'scrot' i get a full screenshot in
1366x768 and everything is clean, but the TV itself shows a 1280x720
display. I should've watched the Xorg's log instead of simply assuming
it was working with a screenshot, but anyway now my problem is the same
: The PC is configured in 1366x768, but the TV don't care and shows a
1280x720.
Anyone got a similar issue and a way to fix it ?
Thanks,
Francis Dubé
More information about the freebsd-questions
mailing list