can't read from two cameras

[Samuel Martín Moro]

What do you mean?Are you the fwcontrol maintener?

Is it a common problem on 7.x? Why would fwcontrol work on -CURRENT, while
not in 7.x?


Thanks!


Samuel Martín Moro
CamTrace
{EPITECH.} tek3


On Mon, Jun 29, 2009 at 5:51 PM, Sean Bruno <sean.bruno at dsl-only.net> wrote:

> Yeah, I thought so.
>
> One of these days I'll backport from -CURRENT to 7, but I haven't yet.
>
> -CURRENT most likely doesn't have this issue.
>
> Sean
>
> On Mon, 2009-06-29 at 17:43 +0200, Samuel Martín Moro wrote:
> > sry, I forget:
> >
> >
> > uname -a
> > FreeBSD h2g2.axis.fr 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May  1
> > 08:49:13 UTC 2009
> > root at walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386
> >
> >
> > sysctl -a | grep firewire
> > debug.firewire_debug: 0
> > hw.firewire.hold_count: 3
> > hw.firewire.try_bmr: 1
> > hw.firewire.fwmem.speed: 2
> > hw.firewire.fwmem.eui64_lo: 0
> > hw.firewire.fwmem.eui64_hi: 0
> > hw.firewire.phydma_enable: 1
> > hw.firewire.nocyclemaster: 0
> > hw.firewire.fwe.rx_queue_len: 128
> > hw.firewire.fwe.tx_speed: 2
> > hw.firewire.fwe.stream_ch: 2
> > hw.firewire.fwip.rx_queue_len: 128
> > hw.firewire.sbp.tags: 0
> > hw.firewire.sbp.use_doorbell: 0
> > hw.firewire.sbp.scan_delay: 500
> > hw.firewire.sbp.login_delay: 1000
> > hw.firewire.sbp.exclusive_login: 1
> > hw.firewire.sbp.max_speed: 2
> > hw.firewire.sbp.auto_login: 1
> > dev.firewire.0.%desc: IEEE1394(FireWire) bus
> > dev.firewire.0.%driver: firewire
> > dev.firewire.0.%parent: fwohci0
> > dev.fwe.0.%parent: firewire0
> > dev.fwip.0.%parent: firewire0
> > dev.sbp.0.%parent: firewire0
> > dev.dcons_crom.0.%parent: firewire0
> >
> >
> >
> >
> > if one need something else... ;)
> >
> >
> > thanks !
> >
> >
> >
> >
> >
> > Samuel Martín Moro
> > CamTrace
> > {EPITECH.} tek3
> >
> >
> > On Mon, Jun 29, 2009 at 5:38 PM, Sean Bruno <sean.bruno at dsl-only.net>
> > wrote:
> >
> >         On Mon, 2009-06-29 at 15:50 +0200, Samuel Martín Moro wrote:
> >         > Hi
> >         >
> >         > I've got a problem, trying to read streams from 2 firewire
> >         DV cameras.
> >         > When I plug the second camera in, the first one disapear
> >         from my /dev, and
> >         > is replaced by the new one.
> >         >
> >         > So I just get /dev/fw0 (-> /dev/fw0.0) and /dev/fwmem0
> >         (-> /dev/fwmem0.0)
> >         >
> >         > How can I get more than one device in my /dev ?
> >         >
> >         >
> >         >
> >         > Thanks!
> >         >
> >         >
> >         > Samuel Martín Moro
> >         > CamTrace
> >         > {EPITECH.} tek3
> >
> >         > _______________________________________________
> >         > freebsd-firewire at freebsd.org mailing list
> >         > http://lists.freebsd.org/mailman/listinfo/freebsd-firewire
> >         > To unsubscribe, send any mail to
> >         "freebsd-firewire-unsubscribe at freebsd.org"
> >
> >         Ouch.  Really?
> >
> >         What FreeBSD version is this?
> >
> >         Sean
> >
> >
> >
>
>