Zero size allocation with Yealink VOIP USB Phone, 7.2-RELEASE
(Was: Re: hald: kmem_malloc error)
Andrey Shuvikov
mr.hyro at gmail.com
Sat Jul 18 20:20:19 UTC 2009
On Sat, Jul 18, 2009 at 2:29 PM, Mel
Flynn<mel.flynn+fbsd.questions at mailing.thruhere.net> wrote:
> [ Adding usb@ and keeping long context for that purpose ]
>
> On Saturday 18 July 2009 08:29:32 Andrey Shuvikov wrote:
>> On Sat, Jul 18, 2009 at 2:02 AM, Mel
>>
>> Flynn<mel.flynn+fbsd.questions at mailing.thruhere.net> wrote:
>> > On Friday 17 July 2009 18:59:49 Andrey Shuvikov wrote:
>> >> I'm trying to configure X and according to the manual enabled DBUS and
>> >> HALD. But when hald is starting up I get kernel panic:
>> >>
>> >> kmem_malloc: entry not found or misaligned
>> >>
>> >> Does anyone know what could be wrong? I have memory dump if it can
>> >> help but it's big (173M).
>> >
>> > If you have a file /var/crash/vmcore.0, you will want to run the
>> > following command:
>> > kgdb /boot/kernel/kernel /var/crash/vmcore.0
>> > Then type bt at the prompt and paste output here.
>> >
>> > More info:
>> > <http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/ker
>> >neldebug.html>
>> >
>> > uname -a and dmesg output also help in diagnosing this problem.
>> > --
>> > Mel
>>
>> The uname output is:
>>
>> FreeBSD foxtrot.home 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1
>> 08:49:13 UTC 2009
>> root at walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>>
>> The kgdb output:
>>
>> GNU gdb 6.1.1 [FreeBSD]
>> Copyright 2004 Free Software Foundation, Inc.
>> GDB is free software, covered by the GNU General Public License, and you
>> are welcome to change it and/or distribute copies of it under certain
>> conditions. Type "show copying" to see the conditions.
>> There is absolutely no warranty for GDB. Type "show warranty" for details.
>> This GDB was configured as "i386-marcel-freebsd"...
>>
>> Unread portion of the kernel message buffer:
>> panic: kmem_malloc: entry not found or misaligned
>> cpuid = 0
>> Uptime: 52s
>> Physical memory: 2034 MB
>> Dumping 176 MB: 161 145 129 113 97 81 65 49 33 17 1
>>
>> Reading symbols from /boot/kernel/linux.ko...Reading symbols from
>> /boot/kernel/linux.ko.symbols...done.
>> done.
>> Loaded symbols for /boot/kernel/linux.ko
>> #0 doadump () at pcpu.h:196
>> 196 pcpu.h: No such file or directory.
>> in pcpu.h
>> (kgdb) bt
>> #0 doadump () at pcpu.h:196
>> #1 0xc07e25a7 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:418
>> #2 0xc07e2879 in panic (fmt=Variable "fmt" is not available.
>> ) at /usr/src/sys/kern/kern_shutdown.c:574
>> #3 0xc0a1cdc0 in kmem_malloc (map=0xc147108c, size=0, flags=2)
>> at /usr/src/sys/vm/vm_kern.c:381
>> #4 0xc0a13357 in page_alloc (zone=0x0, bytes=0, pflag=0xe7b6497f "\002",
>> wait=2) at /usr/src/sys/vm/uma_core.c:952
>> #5 0xc0a15e20 in uma_large_malloc (size=0, wait=2)
>> at /usr/src/sys/vm/uma_core.c:2706
>> #6 0xc07d16f8 in malloc (size=0, mtp=0xc0c46580, flags=2)
> ^^^^^^
>> at /usr/src/sys/kern/kern_malloc.c:393
>> #7 0xc0743044 in uhidopen (dev=0xc5713000, flag=1, mode=8192,
>> p=0xc5c6a460) at /usr/src/sys/dev/usb/uhid.c:428
> In kgdb can you print the entire softcell as follows:
> f 7
> p *sc
>
> Hopefully that will provide sufficient information for the usb developers to
> fix this problem.
>
>> #8 0xc07a56a0 in giant_open (dev=0xc5713000, oflags=1, devtype=8192,
>> td=0xc5c6a460) at /usr/src/sys/kern/kern_conf.c:332
>> #9 0xc076e1fc in devfs_open (ap=0xe7b64a88)
>> at /usr/src/sys/fs/devfs/devfs_vnops.c:908
>> #10 0xc0af88d2 in VOP_OPEN_APV (vop=0xc0c47ee0, a=0xe7b64a88)
>> at vnode_if.c:371
>> #11 0xc0870829 in vn_open_cred (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0,
>> cred=0xc5470100, fp=0xc5b57da8) at vnode_if.h:199
>> #12 0xc0870973 in vn_open (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0,
>> fp=0xc5b57da8) at /usr/src/sys/kern/vfs_vnops.c:94
>> #13 0xc086e0a3 in kern_open (td=0xc5c6a460,
>> path=0xbfbfe90c <Address 0xbfbfe90c out of bounds>,
>> pathseg=UIO_USERSPACE, flags=1, mode=0)
>> at /usr/src/sys/kern/vfs_syscalls.c:1042
>> #14 0xc086e610 in open (td=0xc5c6a460, uap=0xe7b64cfc)
>> at /usr/src/sys/kern/vfs_syscalls.c:1009
>> #15 0xc0ae4495 in syscall (frame=0xe7b64d38)
>> at /usr/src/sys/i386/i386/trap.c:1090
>> #16 0xc0ac9260 in Xint0x80_syscall ()
>> at /usr/src/sys/i386/i386/exception.s:255
>> #17 0x00000033 in ?? ()
>> Previous frame inner to this frame (corrupt stack?)
>> (kgdb) q
>>
>> The dmesg:
>>
>> Copyright (c) 1992-2009 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>> The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
>> root at walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>> Timecounter "i8254" frequency 1193182 Hz quality 0
>> CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2999.67-MHz 686-class
>> CPU) Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
>>
>> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
>>A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>> Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PD
>>CM,SSE4.1> AMD Features=0x20100000<NX,LM>
>> AMD Features2=0x1<LAHF>
>> Cores per package: 2
>> real memory = 2146893824 (2047 MB)
>> avail memory = 2091225088 (1994 MB)
>> ACPI APIC Table: <A_M_I_ OEMAPIC >
>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>> cpu0 (BSP): APIC ID: 0
>> cpu1 (AP): APIC ID: 1
>> ioapic0 <Version 2.0> irqs 0-23 on motherboard
>> kbd1 at kbdmux0
>> acpi0: <A_M_I_ OEMRSDT> on motherboard
>> acpi0: [ITHREAD]
>> acpi0: Power Button (fixed)
>> acpi0: reservation of 0, a0000 (3) failed
>> acpi0: reservation of 100000, 7ff00000 (3) failed
>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
>> acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900
>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>> pci0: <ACPI PCI bus> on pcib0
>> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
>> pci1: <ACPI PCI bus> on pcib1
>> vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
>> 0xd0000000-0xdfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on
>> pci1
>> pci1: <multimedia, HDA> at device 0.1 (no driver attached)
>> uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at
>> device 26.0 on pci0
>> uhci0: [GIANT-LOCKED]
>> uhci0: [ITHREAD]
>> usb0: <UHCI (generic) USB controller> on uhci0
>> usb0: USB revision 1.0
>> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
>> uhub0: 2 ports with 2 removable, self powered
>> uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at
>> device 26.1 on pci0
>> uhci1: [GIANT-LOCKED]
>> uhci1: [ITHREAD]
>> usb1: <UHCI (generic) USB controller> on uhci1
>> usb1: USB revision 1.0
>> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
>> uhub1: 2 ports with 2 removable, self powered
>> uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at
>> device 26.2 on pci0
>> uhci2: [GIANT-LOCKED]
>> uhci2: [ITHREAD]
>> usb2: <UHCI (generic) USB controller> on uhci2
>> usb2: USB revision 1.0
>> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
>> uhub2: 2 ports with 2 removable, self powered
>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff
>> irq 18 at device 26.7 on pci0
>> ehci0: [GIANT-LOCKED]
>> ehci0: [ITHREAD]
>> usb3: EHCI version 1.0
>> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
>> usb3: <EHCI (generic) USB 2.0 controller> on ehci0
>> usb3: USB revision 2.0
>> uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
>> uhub3: 6 ports with 6 removable, self powered
>> umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on
>> uhub3 pci0: <multimedia, HDA> at device 27.0 (no driver attached)
>> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
>> pci4: <ACPI PCI bus> on pcib2
>> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
>> pci3: <ACPI PCI bus> on pcib3
>> atapci0: <Marvell 88SX6121 UDMA133 controller> port
>> 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f
>> mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci3
>> atapci0: [ITHREAD]
>> ata2: <ATA channel 0> on atapci0
>> ata2: [ITHREAD]
>> pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
>> pci2: <ACPI PCI bus> on pcib4
>> ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f
>> mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci2
>> ale0: 960 Tx FIFO, 1024 Rx FIFO
>> ale0: Using 1 MSI messages.
>> miibus0: <MII bus> on ale0
>> atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
>> atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX,
>> auto ale0: Ethernet address: 00:22:15:5a:67:e8
>> ale0: [FILTER]
>> uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at
>> device 29.0 on pci0
>> uhci3: [GIANT-LOCKED]
>> uhci3: [ITHREAD]
>> usb4: <UHCI (generic) USB controller> on uhci3
>> usb4: USB revision 1.0
>> uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
>> uhub4: 2 ports with 2 removable, self powered
>> uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at
>> device 29.1 on pci0
>> uhci4: [GIANT-LOCKED]
>> uhci4: [ITHREAD]
>> usb5: <UHCI (generic) USB controller> on uhci4
>> usb5: USB revision 1.0
>> uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
>> uhub5: 2 ports with 2 removable, self powered
>> uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at
>> device 29.2 on pci0
>> uhci5: [GIANT-LOCKED]
>> uhci5: [ITHREAD]
>> usb6: <UHCI (generic) USB controller> on uhci5
>> usb6: USB revision 1.0
>> uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
>> uhub6: 2 ports with 2 removable, self powered
>> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff800-0xfe7ffbff
>> irq 23 at device 29.7 on pci0
>> ehci1: [GIANT-LOCKED]
>> ehci1: [ITHREAD]
>> usb7: EHCI version 1.0
>> usb7: companion controllers, 2 ports each: usb4 usb5 usb6
>> usb7: <EHCI (generic) USB 2.0 controller> on ehci1
>> usb7: USB revision 2.0
>> uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
>> uhub7: 6 ports with 6 removable, self powered
>> ugen0: <Microsoft Microsoft LifeCam VX-5000, class 239/2, rev
>> 2.00/1.00, addr 2> on uhub7
>> pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>> pci5: <ACPI PCI bus> on pcib5
>> fwohci0: <Lucent FW322/323> mem 0xfebff000-0xfebfffff irq 19 at device
>> 3.0 on pci5
>> fwohci0: [FILTER]
>> fwohci0: OHCI version 1.0 (ROM=1)
>> fwohci0: No. of Isochronous channels is 8.
>> fwohci0: EUI64 00:1e:8c:00:01:63:47:d0
>> fwohci0: Phy 1394a available S400, 2 ports.
>> fwohci0: Link S400, max_rec 2048 bytes.
>> firewire0: <IEEE1394(FireWire) bus> on fwohci0
>> fwe0: <Ethernet over FireWire> on firewire0
>> if_fwe0: Fake Ethernet address: 02:1e:8c:63:47:d0
>> fwe0: Ethernet address: 02:1e:8c:63:47:d0
>> fwip0: <IP over FireWire> on firewire0
>> fwip0: Firewire address: 00:1e:8c:00:01:63:47:d0 @ 0xfffe00000000,
>> S400, maxrec 2048
>> sbp0: <SBP-2/SCSI over FireWire> on firewire0
>> dcons_crom0: <dcons configuration ROM> on firewire0
>> dcons_crom0: bus_addr 0x12e4000
>> fwohci0: Initiate bus reset
>> fwohci0: BUS reset
>> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
>> isa0: <ISA bus> on isab0
>> atapci1: <Intel ICH10 SATA300 controller> port
>> 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x940
>>0-0x940f irq 19 at device 31.2 on pci0
>> atapci1: [ITHREAD]
>> ata3: <ATA channel 0> on atapci1
>> ata3: [ITHREAD]
>> ata4: <ATA channel 1> on atapci1
>> ata4: [ITHREAD]
>> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>> atapci2: <Intel ICH10 SATA300 controller> port
>> 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa40
>>0-0xa40f irq 19 at device 31.5 on pci0
>> atapci2: [ITHREAD]
>> ata5: <ATA channel 0> on atapci2
>> ata5: [ITHREAD]
>> ata6: <ATA channel 1> on atapci2
>> ata6: [ITHREAD]
>> acpi_button0: <Power Button> on acpi0
>> fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
>> 2 on acpi0
>> fdc0: [FILTER]
>> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>> sio0: configured irq 4 not in bitmap of probed irqs 0
>> sio0: port may not be enabled
>> sio0: configured irq 4 not in bitmap of probed irqs 0
>> sio0: port may not be enabled
>> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
>> acpi0 sio0: type 16550A
>> sio0: [FILTER]
>> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> atkbd0: [GIANT-LOCKED]
>> atkbd0: [ITHREAD]
>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> psm0: [GIANT-LOCKED]
>> psm0: [ITHREAD]
>> psm0: model IntelliMouse, device ID 3
>> cpu0: <ACPI CPU> on acpi0
>> ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EE,
>> should be E5 [20070320]
>> est0: <Enhanced SpeedStep Frequency Control> on cpu0
>> p4tcc0: <CPU Frequency Thermal Control> on cpu0
>> cpu1: <ACPI CPU> on acpi0
>> est1: <Enhanced SpeedStep Frequency Control> on cpu1
>> est: CPU supports Enhanced Speedstep, but is not recognized.
>> est: cpu_vendor GenuineIntel, msr 618092006000920
>> device_attach: est1 attach returned 6
>> p4tcc1: <CPU Frequency Thermal Control> on cpu1
>> pmtimer0 on isa0
>> orm0: <ISA Option ROM> at iomem 0xd0000-0xd27ff pnpid ORM0000 on isa0
>> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
>> ata0: [ITHREAD]
>> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
>> ata1: [ITHREAD]
>> ppc0: parallel port not found.
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> sio1: configured irq 3 not in bitmap of probed irqs 0
>> sio1: port may not be enabled
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>> uhid0: <Yealink Network Technology Ltd. VOIP USB Phone, class 0/0, rev
>> 1.01/0.00, addr 2> on uhub5
>> Timecounters tick every 1.000 msec
>> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>> firewire0: bus manager 0 (me)
>> acd0: DVDR <PLEXTOR DVDR PX-712A/1.04> at ata2-master UDMA33
>> ad6: 152627MB <WDC WD1600JS-00SGB0 20.06C03> at ata3-master SATA300
>> ad8: 305245MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata4-master SATA300
>> GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS.
>> GEOM_LABEL: Label for provider ad8s1 is ntfs/New Volume.
>> GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc.
>> GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0.
>> GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33.
>> GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f.
>> GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e.
>> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
>> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
>> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
>> (probe0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
>> (probe0:umass-sim0:0:0:0): Medium not present
>> (probe0:umass-sim0:0:0:0): Unretryable error
>> (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
>> (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
>> (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
>> (probe0:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
>> (probe0:umass-sim0:0:0:1): Medium not present
>> (probe0:umass-sim0:0:0:1): Unretryable error
>> (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
>> (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error
>> (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition
>> (probe0:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
>> (probe0:umass-sim0:0:0:2): Medium not present
>> (probe0:umass-sim0:0:0:2): Unretryable error
>> (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
>> (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
>> (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
>> (probe0:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
>> (probe0:umass-sim0:0:0:3): Medium not present
>> (probe0:umass-sim0:0:0:3): Unretryable error
>> SMP: AP CPU #1 Launched!
>> da0 at umass-sim0 bus 0 target 0 lun 0
>> da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
>> da0: 40.000MB/s transfers
>> da0: Attempt to query device size failed: NOT READY, Medium not present
>> da1 at umass-sim0 bus 0 target 0 lun 1
>> da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
>> da1: 40.000MB/s transfers
>> da1: Attempt to query device size failed: NOT READY, Medium not present
>> da2 at umass-sim0 bus 0 target 0 lun 2
>> da2: <Generic USB xD/SM Reader 1.02> Removable Direct Access SCSI-0 device
>> da2: 40.000MB/s transfers
>> da2: Attempt to query device size failed: NOT READY, Medium not present
>> da3 at umass-sim0 bus 0 target 0 lun 3
>> da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
>> da3: 40.000MB/s transfers
>> da3: Attempt to query device size failed: NOT READY, Medium not present
>> Trying to mount root from ufs:/dev/ad6s3a
>> GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed.
>> GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc.
>> GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed.
>> GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e.
>> GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed.
>> GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33.
>> GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed.
>> GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f.
>> GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed.
>> GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0.
>> GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed.
>> GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed.
>> GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed.
>> GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed.
>> GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed.
>> GEOM_LABEL: Label msdosfs/FREEDOS removed.
>> GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS.
>> GEOM_LABEL: Label msdosfs/FREEDOS removed.
>>
>> Thanks,
>> Andrey
>
> --
> Mel
>
Below is the output of the kgdb. When I detach this device there is no
panic on hald startup. How did you know it's Yealink? Just because
it's the only uhid device?
At least I can continue now.
Thanks a lot!
Andrey
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-marcel-freebsd"...
Unread portion of the kernel message buffer:
panic: kmem_malloc: entry not found or misaligned
cpuid = 0
Uptime: 52s
Physical memory: 2034 MB
Dumping 176 MB: 161 145 129 113 97 81 65 49 33 17 1
Reading symbols from /boot/kernel/linux.ko...Reading symbols from
/boot/kernel/linux.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/linux.ko
#0 doadump () at pcpu.h:196
196 pcpu.h: No such file or directory.
in pcpu.h
(kgdb) f 7
#7 0xc0743044 in uhidopen (dev=0xc5713000, flag=1, mode=8192, p=0xc5c6a460)
at /usr/src/sys/dev/usb/uhid.c:428
428 /usr/src/sys/dev/usb/uhid.c: No such file or directory.
in /usr/src/sys/dev/usb/uhid.c
(kgdb) p *sc
$1 = {sc_dev = 0xc570da00, sc_udev = 0xc570d800, sc_iface = 0xc570e054,
sc_intrpipe = 0x0, sc_ep_addr = 129, sc_isize = -15, sc_osize = -15,
sc_fsize = 0, sc_iid = 0 '\0', sc_oid = 0 '\0', sc_fid = 0 '\0',
sc_ibuf = 0x0, sc_obuf = 0x0, sc_repdesc = 0xc571bc80,
sc_repdesc_size = 39, sc_q = {c_cc = 0, c_cbcount = 0, c_cbmax = 11,
c_cbreserved = 11, c_cf = 0x0, c_cl = 0x0}, sc_rsel = {si_thrlist = {
tqe_next = 0x0, tqe_prev = 0x0}, si_thread = 0x0, si_note = {kl_list = {
slh_first = 0x0}, kl_lock = 0, kl_unlock = 0, kl_locked = 0,
kl_lockarg = 0x0}, si_flags = 0}, sc_async = 0x0, sc_state = 1 '\001',
sc_refcnt = 0, sc_dying = 0 '\0', dev = 0xc5713000}
(kgdb) q
More information about the freebsd-questions
mailing list