(EE) intel(0): [DRI] Locking deadlock. (EE) intel(0): [DRI]
Unlocking inconsistency:
Antonio Rieser
tonyrieser at gmail.com
Sat Jan 31 08:18:13 PST 2009
Hi,
Thanks for the note. X11 normally finds the tablet fine, and I quite
like using it, so I'd rather not comment out the lines in xorg.conf.
The entire system is a new install, so there doesn't seem to be an
updating issue, and, in any case, there's nothing in
/usr/ports/UPDATING regarding xorg that seems relevant.
It does, however, seem to be a problem with interaction between the
tablet and xorg (and maybe the usb system). If I boot without having
plugged in the wacom tablet, I get the lines I've included below in my
Xorg.0.log. It doesn't seem to write more than this, however, so it
doesn't fill up /var. However, if I plug it in and logout,
restarting X11/KDE/KDM, then I get the error messages from my first
message, which eventually crash my system, but until then, the tablet
itself works fine.
Two more points:
1) If I boot with the tablet plugged in, everything is fine.
2) If I remove the tablet from the computer (I've only tried it during
an X session), the system panics and shuts down.
Should I repost this thread to freebsd-ports or freebsd-usb?
Thanks again for any help!
All the best,
Tony
-------------------------------------------------------------------
Enclosed below are the error messages at the end of
/var/log/Xorg.0.log after booting without the tablet plugged in:
-------------------------------------------------------------------
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/sysmouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/sysmouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/event0
(**) stylus is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) stylus: reading USB link
(**) /dev/event0: Touch capacity is enabled
(**) Option "BaudRate" "9600"
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/event0
(**) eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) eraser: reading USB link
(**) /dev/event0: Touch capacity is enabled
(**) Option "BaudRate" "9600"
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/event0
(**) cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) cursor: reading USB link
(**) /dev/event0: Touch capacity is enabled
(**) Option "BaudRate" "9600"
(**) Option "SendCoreEvents"
(**) pad: always reports core events
(**) pad device is /dev/event0
(**) pad is in relative mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) pad: reading USB link
(**) /dev/event0: Touch capacity is enabled
(**) Option "BaudRate" "9600"
(II) evaluating device (pad)
(II) XINPUT: Adding extended input device "pad" (type: Wacom Pad)
(II) evaluating device (cursor)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) evaluating device (eraser)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) evaluating device (stylus)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "Device" "/dev/event0"
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(**) Option "Device" "/dev/event0"
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(**) Option "Device" "/dev/event0"
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(**) Option "Device" "/dev/event0"
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse0: SetupAuto: protocol is SysMouse
(EE) intel(0): underrun on pipe B!
(EE) intel(0): tried to update DSPARB with both planes enabled!
(II) intel(0): EDID vendor "LGP", prod id 1623
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "LGP", prod id 1623
(EE) intel(0): underrun on pipe B!
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
(EE) xf86OpenSerial: Cannot open device /dev/event0
No such file or directory.
Error opening /dev/event0 : Unknown error: 0
All the best,
Tony
On Sat, Jan 31, 2009 at 8:09 AM, Glen Barber <glen.j.barber at gmail.com> wrote:
> Antonio Rieser said:
>> I'm running FreeBSD 7.1 on an ACER Aspire
>> 1680 laptop. Something is writing so many
>> errors to my Xorg.0.log and kdm-bin.log files
>> that it fills up the /var filesystem and locks my system.
>> (I just had my first encounter with the fixit disk - scary
>> but successful...)
>>
>> I've enclosed the output of
>> dmesg (starting at my most recent boot, without
>> my Wacom tablet or any USB devices), followed by
>> an excerpt of the Xorg.0.log.old file.
>> The errors at the end of the latter are repeated
>> until the end of the file.
>>
>> The errors always begin after some lines about the
>> Wacom tablet. Is that a coincidence or a probable cause?
>>
>
> If Xorg can't find a tablet device (Wacom), it will show errors about
> it, which you can avoid by commenting out wacom devices in xorg.conf.
>
> Have these problems recently surfaced after upgrading Xorg to 7.4?
>
> If so, did you read /usr/ports/UPDATING?
>
> --
> Glen Barber
>
More information about the freebsd-questions
mailing list