(EE) intel(0): [DRI] Locking deadlock. (EE) intel(0): [DRI]
Unlocking inconsistency:
Antonio Rieser
tonyrieser at gmail.com
Sat Jan 31 00:10:30 PST 2009
Hi,
I'm running FreeBSD 7.1 on an ACER Aspire
1680 laptop. Something is writing so many
errors to my Xorg.0.log and kdm-bin.log files
that it fills up the /var filesystem and locks my system.
(I just had my first encounter with the fixit disk - scary
but successful...)
I've enclosed the output of
dmesg (starting at my most recent boot, without
my Wacom tablet or any USB devices), followed by
an excerpt of the Xorg.0.log.old file.
The errors at the end of the latter are repeated
until the end of the file.
The errors always begin after some lines about the
Wacom tablet. Is that a coincidence or a probable cause?
Many, many thanks,
Tony Rieser
------------------------------------------------------
dmesg output:
------------------------------------------------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE #0: Thu Jan 1 14:37:25 UTC 2009
root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
module_register: module uhub/umass already exists!
Module uhub/umass failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.50GHz (1498.74-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
AMD Features=0x100000<NX>
real memory = 518914048 (494 MB)
avail memory = 493772800 (470 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <ACER Kestrel> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0-0x3ff on acpi0
device_attach: acpi_hpet0 attach returned 12
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem
0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 6 at device 2.0 on
pci0
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> on vgapci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
vgapci1: <VGA-compatible display> mem
0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f
irq 6 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f
irq 6 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f
irq 6 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem
0xe0100000-0xe01003ff irq 10 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xe0204000-0xe0205fff irq 6
at device 2.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:c0:9f:7f:13:f7
bfe0: [ITHREAD]
pci2: <network> at device 4.0 (no driver attached)
cbb0: <TI6411 PCI-CardBus Bridge> mem 0xe0209000-0xe0209fff irq 10 at
device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
fwohci0: <1394 Open Host Controller Interface> mem
0xe020a000-0xe020a7ff,0xe0200000-0xe0203fff irq 10 at device 6.2 on
pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:3f:a5:0d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:3f:a5:0d
fwe0: Ethernet address: 02:c0:9f:3f:a5:0d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:c0:9f:00:00:3f:a5:0d @ 0xfffe00000000,
S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1e4c0000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
pci2: <mass storage> at device 6.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem
0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 10 at device 31.5 on
pci0
pcm0: [ITHREAD]
pcm0: <Conexant CX20468-21 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
battery0: <ACPI Smart Battery> on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_hpet0: <High Precision Event Timer> iomem 0-0x3ff on acpi0
device_attach: acpi_hpet0 attach returned 12
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xcd000-0xce7ff,0xdf800-0xdffff,0xe0000-0xe3fff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1498735522 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 57231MB <IC25N060ATMR04 0 MO3OAD4A> at ata0-master UDMA100
acd0: CDRW <QSI CD-RW/DVD-ROM SBW242C/UQ81> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
acpi_smbus_read_2: AE_ERROR 0x10
acpi_smbus_read_2: AE_ERROR 0x10
acpi_smbus_read_2: AE_ERROR 0x10
acpi_smbus_read_2: AE_ERROR 0x10
acpi_smbus_read_2: AE_ERROR 0x10
acpi_smbus_read_2: AE_ERROR 0x10
pid 700 (dmesg), uid 0 inumber 47319 on /var: filesystem full
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
pid 667 (syslogd), uid 0 inumber 70701 on /var: filesystem full
pid 838 (sendmail), uid 25 inumber 94224 on /var: filesystem full
drm0: <Intel i852GM/i855GM GMCH> on vgapci0
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized i915 1.5.0 20060119
drm1: <Intel i852GM/i855GM GMCH> on vgapci1
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized i915 1.5.0 20060119
bfe0: link state changed to UP
---------------------------------------------------
Excerpt of /var/log/Xorg.0.log.old
---------------------------------------------------
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00027fff: logical 3D context (32 kB)
(II) intel(0): 0x00400000-0x007fffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00fdf000: end of stolen memory
(II) intel(0): 0x00fdf000-0x015defff: compressed frame buffer (6144
kB, 0x0000000019400000 physical
)
(II) intel(0): 0x015df000-0x015dffff: compressed ll buffer (4 kB,
0x000000000c62c000 physical
)
(II) intel(0): 0x015e0000-0x015e0fff: overlay registers (4 kB,
0x000000001231f000 physical
)
(II) intel(0): 0x015e1000-0x01ee0fff: exa offscreen (9216 kB)
(II) intel(0): 0x08000000: end of aperture
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00000011
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 66 MHz
(WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from
desired 65.0 Mhz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TMDS is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) intel(0): Setting screen physical size to 304 x 228
(II) evaluating device (touch)
(II) evaluating device (pad)
(II) evaluating device (cursor)
(II) evaluating device (eraser)
(II) evaluating device (stylus)
(II) evaluating device (Keyboard0)
(II) evaluating device (Mouse0)
touch Wacom X driver can't grab event device, errno=1005
WACOM: touch max value(s) was wrong MaxTouchY = 0 MaxTouchY = 0.
pad Wacom X driver can't grab event device, errno=1005
(==) Wacom USB BambooFun tablet speed=9600 (38400) maxX=21648
maxY=13530 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "pad" top X=0 top Y=0 bottom X=21648 bottom Y=13530
resol X=2540 resol Y=2540
(==) Wacom device "cursor" top X=0 top Y=0 bottom X=21648 bottom
Y=13530 resol X=2540 resol Y=2540
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=21648 bottom
Y=13530 resol X=2540 resol Y=2540
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=21648 bottom
Y=13530 resol X=2540 resol Y=2540
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "2"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(EE) intel(0): underrun on pipe B!
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
trying to lock with context 2.
(EE) intel(0): [DRI] Unlocking inconsistency:
Context 676684348 trying to unlock lock held by context 2
(EE) intel(0): [DRI] Locking deadlock.
Already locked with context 676684348,
.....
More information about the freebsd-questions
mailing list