Can not set up two ADSL link to provider
Chuck Swiger
cswiger at mac.com
Mon Jan 26 15:57:20 PST 2009
On Jan 26, 2009, at 3:34 PM, KES wrote:
> I can not setup two ADSL PPPoE Links to same provider.
> Because of imposibility to setup route for second connection
> First connection gets:
> ng0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST>
> metric 0 mtu 1492
> inet 92.113.94.215 --> 195.5.5.203 netmask 0xffffffff
>
> Second can not be established because of:
> Jan 27 01:27:55 kes mpd: [UKR_B4] IFACE: Add address
> 92.113.94.249/32->195.5.5.203 to ng1
> Jan 27 01:27:55 kes mpd: [UKR_B4] IFACE: Adding IPv4 address to ng1
> failed: File exists
You should talk to your network provider and ask them whether they
want you to do multilink PPP or IEEE 802.3ad link aggregation. Either
way, the bonding of the two connections should give you a single
virtual network interface (tunX for the first, probably, and laggX in
the second case) which has only a single route.
For example: http://www.juniper.net/techpubs/software/erx/junose80/swconfig-physical/html/ethernet-config14.html
...talks about "After you configure the LAG bundle, you can route IP
traffic over it, create a VLAN over it, or route PPPoE traffic over it."
Regards,
--
-Chuck
More information about the freebsd-questions
mailing list