Problem with speedtouch 330

[Maciej Piechotka]

On Thu, 2009-02-26 at 15:10 +1100, Ian Smith wrote:
> On Tue, 24 Feb 2009 19:00:17 +0100 Maciej Piechotka <uzytkownik2 at gmail.com> wrote:
> 
>  > Hello. I have a problem with Speedtouch 330. I cannot connect with my
>  > IPS. In dmesg it is written that the modem_run cannot 'read interrupts'.
>  > 
>  > Regards
>  > 
>  > ppp.conf:
>  > default:
>  > set log Phase Chat LCP IPCP CCP tun command
>  > ident user-ppp VERSION (built COMPILATIONDATE)
>  > set ifaddr 10.0.0.1/0 10.0.0.2/0
>  > 
>  > adsl:
>  > set authname mjnysqqx at webnet24.pl
>  > set authkey 53T6gbDt
> 
> You should change this password, now that you've published it.
> 

I noticed it just after posting. Solved yesterday (although this is only
the password valid for ppp to connect from this one specific line - not
to worry much anyway).

>  > set device !"/usr/local/sbin/pppoa2 -vpi 0 -vci 35 -v 1 -d /dev/ugen0"
I've changed it to:
 set device !"/usr/local/sbin/pppoa3 -c -m 1 -vpi 0 -vci 35"
>  > accep chap
> 
> It's 'accept', though the abbreviation does work (see below).
> 
>  > set sppeed sync
> 
> It's 'speed'.
> 

Corrected. One of this 2 changes solved the problem.

>  > set timeout 0
>  > set reconnect 10 100
>  > #enable lqr
>  > #set lqrperiod 5
>  > #set radial 15 1000
>  > #set dial ""
>  > add default HISADDR
>  > #enable dns
>  > 
>  > ppp.log:
>  > Feb 23 20:54:33 HOSTNAME ppp[961]: Phase: Using interface: tun0
>  > Feb 23 20:54:33 HOSTNAME ppp[961]: Phase: deflink: Created in closed
>  > state
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: default: ident
>  > user-ppp VERSION (built COMPILATIONDATE)
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: default: set ifaddr
>  > 10.0.0.1/0 10.0.0.2/0
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set authname
>  > ******@webnet24.pl
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set authkey
>  > ********
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set
>  > device !/usr/local/sbin/pppoa3 -vpi 0 -vci 35 -v 1
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: accep chap
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set spped sync
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set spped: Invalid
>  > command
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set spped: Failed 1
> 
> See above (though this indicates a *different* misspelling of 'speed')
> 

I notice it after sending. I've wrote about solving through gmane but it
silently drop posts.

>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set timeout 0
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: enable lqr
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set lqrperiod 5
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set radial 15
>  > 1000
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set radial: Invalid
>  > command
>  > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set radial: Failed 1
> 
> Try 'redial'.  This log also doesn't match the config shown above.
> 

Sorry. I tried many configurations and I mistaken the log.

> cheers, Ian

Regards and thanks for response

I have now 2 problems:
1. I need to run modem_run -m
-f /usr/local/libdata/speedtouch/ZZZL_3.012 before ppp starts first
time. I tried to add attach event to udev but it didn't worked. I tried
copy'n'paste the example for usbd from FreeBSD Handbook but it didn't
work as well. I can assume that the device is attached from the
beginning.

2. If I try to run sixxs-aiccu I get:
[tun-start] Trying Configured TUN/TAP interface gif0...
[tun-start] Trying TUN/TAP interface 0...
[tun-start] Couldn't open device gif0 or /dev/tun*: Device busy (16)

It seems that any other gif does not work eighter. I can create gif
interfaces and if_gif module is loaded. Any ideas?

(Sorry - the second question I will multipost on sixxs forum as I have
no chances of cross-posting)

Regards
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20090226/880c8e23/attachment.pgp