Link UP/DOWN problem with re0 on FreeBSD 7.1

Graeme Dargie arab at tangerine-army.co.uk
Tue Feb 10 16:31:17 PST 2009



-----Original Message-----
From: FreeBSD [mailto:freebsd at optiksecurite.com] 
Sent: 10 February 2009 17:22
To: Graeme Dargie
Cc: freebsd-questions at freebsd.org
Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1

Graeme Dargie a écrit :
> 
> -----Original Message-----
> From: FreeBSD [mailto:freebsd at optiksecurite.com] 
> Sent: 06 February 2009 16:47
> To: Graeme Dargie
> Cc: freebsd-questions at freebsd.org
> Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
> 
> Graeme Dargie a écrit :
>> -----Original Message-----
>> From: FreeBSD [mailto:freebsd at optiksecurite.com] 
>> Sent: 04 February 2009 21:55
>> Cc: freebsd-questions at freebsd.org
>> Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
>>
>> FreeBSD a écrit :
>>> Graeme Dargie a écrit :
>>>> If you do a dmesg are you also showing a watchdog time out for the nic ?
>>>>
>>>> I only ask as I am having the exact same problem with the exact same 
>>>> card and I have yet to find a solution, if I come across something I 
>>>> will let you know.
>>>>
>>>> Regards
>>>> Graeme
>>> Not a single time...sorry.
>>>
>>>> -----Original Message-----
>>>> From: FreeBSD [mailto:freebsd at optiksecurite.com] Sent: 26 January 2009 
>>>> 18:58
>>>> To: freebsd-questions at freebsd.org
>>>> Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
>>>>
>>>> FreeBSD a écrit :
>>>>> Hi everyone,
>>>>>
>>>>> Just to put you in context, I applied the following patch to make the 
>>>>> card available:
>>>>>
>>>>> SVN rev 186389 on 2008-12-22 00:46:22Z by yongari
>>>>>
>>>>> Since we don't request reset for rlphy(4), the link state 'UP'
>>>>> event from mii(4) may not be delivered if valid link was already
>>>>> established. To address the issue, check current link state after
>>>>> driving MII_TICK. This should fix a regression introduced in
>>>>> r185753 on fast ethernet controllers.
>>>>>
>>>>> ---
>>>>>
>>>>> I don't have any issue related to that anymore. The problem is that I 
>>>>> get link UP/DOWN a few times per hour on 3 identical machines that I 
>>>>> dumped/restored. They are all pluged in a Cisco switch that works 
>>>>> fine for every other PCs.
>>>>>
>>>>> Jan 26 06:09:15 term005 kernel: re0: link state changed to DOWN
>>>>> Jan 26 06:09:17 term005 kernel: re0: link state changed to UP
>>>>>
>>>>> I tried to switch cables, but I got the same result.
>>>>>
>>>>> There is the pciconf -lv output:
>>>>>
>>>>> re0 at pci0:3:0:0: class=0x020000 card=0x02831028 chip=0x816810ec 
>>>>> rev=0x02 hdr=0x00
>>>>>     vendor     = 'Realtek Semiconductor'
>>>>>     device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
>>>>>     class      = network
>>>>>     subclass   = ethernet
>>>>>
>>>>> There is the output of vmstat -i:
>>>>>
>>>>> interrupt                          total       rate
>>>>> irq18: re0 ehci0++                 63766          0
>>>>> irq19: atapci0                    277001          3
>>>>> cpu0: timer                    156068748       1961
>>>>> Total                          156409515       1966
>>>>>
>>>>> Could it be related to the fact that there is re0 and ehci0++ on the 
>>>>> same IRQ?
>>>>>
>>>>> Thank you for your help,
>>>>>
>>>>> Martin
>>>> I just tried with a brand new Dell 2708 switch and the problem is 
>>>> still there. I just confirmed that the UP/DOWN occurs every 10 minutes 
>>>> (+- a few seconds).
>>>>
>>>> Thanks again,
>>>>
>>>> Martin
>>>>
>> Just to follow-up on my own problem...
>>
>> I tried to disable some options of the card with :
>> ifconfig re0 -rxcsum -txcsum -tso -lro -vlanhwtag
>>
>> but nothing as changed. I just tried to download a big file (FreeBSD 
>> 7.1-REL DVD iso in fact) to see if the deconnection occurs even during a 
>> transfer. The DVD downloaded successfully and I verified that the MD5 
>> are OK. BUT, /var/log/messages continue to tell me that:
>> Feb  4 16:09:29 term003 kernel: re0: link state changed to UP
>> Feb  4 16:19:26 term003 kernel: re0: link state changed to DOWN
>> Feb  4 16:19:30 term003 kernel: re0: link state changed to UP
>> Feb  4 16:19:32 term003 kernel: re0: link state changed to DOWN
>>
>> during the transfer (which worked OK). I don't know if that can help 
>> someone to help me ;)
>>
>> Thanks,
>>
>> Martin
>>
>> _______________________________________________
>> freebsd-questions at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>>
>> I have a solution to this well a work around.
>>
>> Add -tso to the relevant line in /etc/rc.conf
>>
>> ifconfig_re0="inet 192.168.1.103  netmask 255.255.255.0 -tso"
>>
>> Adding -tso stops the link up / link down problem. Now I am understand that this may increase cpu if the traffic on the nic is high. I am sure some one the list will know of any other implications this may have.
>>
>> It is a known problem and I site I read the bug had been submitted so hopefully it wont exist in 8.0 
>>
>> Regards
>>
>> Graeme
>>
> 
> As I stated in my last post, I tried to disable a few options, including 
> TSO. Still, I gived a try to your workaround. I now have this line in 
> rc.conf:
> ifconfig_re0="DHCP -tso"
> 
> but I have the same problem (it disconnect every 10 minutes and ask for 
> an IP to the DHCP).
> 
> Thanks for your suggestion,
> 
> Martin
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> 
> 
> 
> 
> I don't use DHCP so it never causes me a problem, have you considered setting a static IP address ?
> 
> Regards
> 
> Graeme
> 

IT WORKS!!! As soon as I setted a static IP there is no deconnection 
anymore. Thanks for the clue, but I'm still wondering why a DHCP Renew 
would make the interface goes DOWN/UP? I guest I'll start another thread 
for that...

Thank you,

Martin
_______________________________________________



Hi Martin

Glad it worked 

Regards

Graeme
freebsd-questions at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"



More information about the freebsd-questions mailing list