CD writing fails on P6T motherboard with Pioneer cdwriter

[Yuri]

Joerg Schilling wrote:
> Yuri <yuri at rawbw.com> wrote:
>
>   
>> Yes, I used cdrtools 2.01 from FreeBSD ports which is from ~2004.
>> For some reason all more recent version all labeled as 'alphas'.
>>
>> Upgrading to Cdrecord-ProDVD-ProBD-Clone 2.01.01a62 didn't help.
>>
>> Adding -raw96r option causes this error message:
>> cdrecord: SAO RAW writing only makes sense in clone mode.
>> And adding -clone on top of that causes this error message:
>> cdrecord: SAO RAW writing not yet implemented.
>>     
>
> I have no idea what you misstyped to create this error message.
> Did you use -sao together with -raw96r?
>
>
>
> Jörg
>
>   

I used -dao. Removing -dao. Removing -dao made my command line like this:
cdrecord dev=5,0,0 speed=4 -raw96r -v -pad -useinfo -text *.wav

And now it fails with this log:
Cdrecord-ProDVD-ProBD-Clone 2.01.01a62 (i386-unknown-freebsd7.2) 
Copyright (C) 1995-2009 J�rg Schilling
TOC Type: 0 = CD-DA
scsidev: '5,0,0'
scsibus: 5 target: 0 lun: 0
Using libscg version 'schily-0.9'.
SCSI buffer size: 65536
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-112D'
Revision : '1.21'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P 
RAW/R96R LAYER_JUMP
Drive buf size : 1267712 = 1238 KB
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size : 4194304 = 4096 KB
Encoding speed : 1000x (75000 sectors/s) for libedc from Heiko Ei�feldt
pregap1: -1
Track 01: audio 54 MB (05:24.16) no preemp
Track 02: audio 41 MB (04:05.64) no preemp pregapsize: 395
Track 03: audio 56 MB (05:38.76) no preemp pregapsize: 388
Track 04: audio 67 MB (06:42.04) no preemp pregapsize: 425
Track 05: audio 29 MB (02:56.33) no preemp pregapsize: 500
Track 06: audio 84 MB (08:19.46) no preemp pregapsize: 518
Track 07: audio 57 MB (05:39.86) no preemp pregapsize: 380
Track 08: audio 32 MB (03:11.06) no preemp pregapsize: 578
Track 09: audio 40 MB (03:59.80) no preemp pregapsize: 340
Track 10: audio 95 MB (09:27.22) no preemp pregapsize: 305
Track 11: audio 27 MB (02:41.44) no preemp pregapsize: 332
Total size: 586 MB (58:05.80) = 261435 sectors
Lout start: 586 MB (58:07/60) = 261435 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Disk Is not unrestricted
Disk Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11834 (97:24/16)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 24
Manufacturer: SONY Corporation

Capacity Blklen/Sparesz. Format-type Type
0 2048 0x00 Unformated or Blank Media
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 98414
Starting to write CD/DVD/BD at speed 4 in real RAW/RAW96R mode for 
single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
cdrecord: WARNING: Drive returns wrong startsec (-150) using -11834 from 
ATIP
Writing lead-in at sector -11834
cdrecord: Input/output error. write_g1: scsi sendcmd: cmd timeout after 
41.429 (40) s
CDB: 2A 00 FF FF D4 02 00 00 1A 00
cmd finished after 41.429s timeout 40s
write leadin data: error after 1400256 bytes
cdrecord: Could not write Lead-in.
Writing time: 56.827s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.