MD5 Checksum mismatch for netatalk-2.0.4.tar.bz2

[Vincent Zee]

On 23 August 2009, at 10:56, andrew clarke wrote:

> On Sun 2009-08-23 10:24:53 UTC+0200, Vincent Zee (zenzee at xs4all.nl)  
> wrote:
>
>> ===>  Vulnerability check disabled, database not found
>> ===>  Extracting for netatalk-2.0.4,1
>> => MD5 Checksum mismatch for netatalk-2.0.4.tar.bz2.
>> => SHA256 Checksum mismatch for netatalk-2.0.4.tar.bz2.
>
> I'm getting a checksum mismatch here too.  This probably means the
> tarball was modified.
>
>> I checked the distinfo file and it is the same as on my other  
>> machine.
>> On which the update went fine.
>
> Solution #1: Use "make NO_CHECKSUM=yes", just ignore the mismatch and
> hope it will build.
>
> Solution #2: Copy /usr/ports/distfiles/netatalk-2.0.4.tar.bz2 from
> your other machine and rebuild.
>
> Solution #3: Don't bother building from ports if you already have a
> working binary on your other machine.  Use "pkg_create -vb
> netatalk\*", copy the resulting file to the new machine, then use
> pkg_add.  This assumes the same architecture (eg. i386) on both
> machines.

Hi Andrew,

thanks for your answer.

I think I'll go with solution number two since the machine have  
different
architectures.

/\
Vincent