7.2 burncd and cdrecord problem
Fernando Apesteguía
fernando.apesteguia at gmail.com
Fri Aug 14 18:23:51 UTC 2009
Hi all,
I'm trying to get my CD drive to work without so much success.
Reading is fine, but when I try to burn a CD I get errors in dmesg.
Using cdrecord -blank=fast dev=3,0,0 I get:
[...]
Using generic SCSI-3/mmc CD-ROM driver (mmc_cd).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Starting to write CD/DVD at speed 18 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
This drive or media does not support the 'BLANK media' command
cdrecord: Cannot blank disk, aborting.
cdrecord: Some drives do not support all blank types.
cdrecord: Try again with cdrecord blank=all.
And dmesg shows:
acd0: FAILURE - READ_BUFFER ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - MODE_SELECT_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00
Using burncd blank I get:
burncd: ioctl(CDRIOCBLANK): Input/output error
and in dmesg:
acd0: FAILURE - BLANK_CMD ILLEGAL REQUEST asc=0x30 ascq=0x05
The drive works perfectly with other OS, so I don't think the hardware
is the problem.
The device is identified as:
acd0: DVDR <TSSTcorp CDDVDW TS-H653N/0208> at ata3-master SATA150
I have scbus, atapicd and atapicam in my kernel configuration.
Any ideas?
Thanks in advance.
More information about the freebsd-questions
mailing list