USB Mouse not working
Wouter Oosterveld
wouter at fizzyflux.nl
Wed Mar 26 10:56:07 PDT 2008
Forgot "Driver":
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
2008/3/26, Wouter Oosterveld <wouter at fizzyflux.nl>:
> I've had probably had the same issues with an logitech wheel-mouse (usb):
>
> Mar 24 23:56:55 harare kernel: ums0: 3 buttons and Z dir.
>
> The following xorg-section without any rc.conf moosed stuff got it to work:
>
> Section "InputDevice"
> Identifier "Mouse1"
>
> Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
>
> Option "Buttons" "5"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Hope this helps.
>
> Regards,
>
> Wouter
>
> 2008/3/26, Fabio Pennati <fabiopnn at tele2.it>:
>
> >
> > I am a new FreeBSD user coming from Gentoo. I am not able to get
> > working an usb optical wired mouse from Labtec that is working well
> > with many Linux distro's and WXP too.
> > I am using a FreeBSD 7.0 standard GENERIC kernel configuration with
> > all usb devices installed, thus:
> >
> > # USB support
> > device uhci # UHCI PCI->USB interface
> > device ohci # OHCI PCI->USB interface
> > device ehci # EHCI PCI->USB interface (USB 2.0)
> > device usb # USB Bus (required)
> > #device udbp # USB Double Bulk Pipe devices
> > device ugen # Generic
> > device uhid # "Human Interface Devices"
> > device ukbd # Keyboard
> > device ulpt # Printer
> > device umass # Disks/Mass storage - Requires scbus
> > and da
> > device ums # Mouse
> >
> > Here is an extract from my rc.conf:
> >
> > usbd_enable="YES"
> > moused_enable="YES"
> > moused_type="auto"
> > moused_port="/dev/ums0"
> > moused_flags=""
> > usbd_flags=""
> > moused_nondefault_enable="YES"
> > moused_ums0_flags=""
> >
> > I tried also to take out from rc.conf any "moused-stuff" lines but
> > without no results.
> > And here is the messages from kernel during boot, probing ums device:
> >
> > ums0: <vendor 0x1241 product 0x1111, class 0/0, rev 1.00/1.00, addr
> > 2> on uhub0
> > ums0: 3 buttons and Z dir.
> >
> > This is the xorg.conf, for the part interesting the mouse:
> >
> > Section "InputDevice"
> > Identifier "Mouse0"
> > Driver "mouse"
> > Option "Protocol" "Auto"
> > Option "Device" "/dev/sysmouse"
> > Option "ZAxisMapping" "4 5 6 7"
> > EndSection
> >
> > Furthermore I installed the same mouse with an hw adapter to the
> > serial port of the PC and obviously it works, of course as pms device,
> > but very slowly and with no precision.
> > There is someone that has any idea ?
> > Thanks, Fabio
> > _______________________________________________
> > freebsd-questions at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> >
>
--
[
wouter at berenboot.xs4all.nl is binnenkort niet meer,
wouter at fizzyflux.nl is mijn nieuwe email-adres.
]
More information about the freebsd-questions
mailing list