Error code 1 upon building-installing kernel FreeBSD 7.0

Thu Mar 20 00:34:55 PDT 2008

On Thu, March 20, 2008 15:06, Indiana Jones wrote:
> Hi,
>
> If anybody could help, I'd be most grateful.
> I have been getting this error message during buildinfg and
> installing a custom kernel on FreeBSD 7.0, after make depend command!

SCTP requires options INET6 to be set in kernel conf.

Either remove SCTP or add INET6

Cheers

Patrick

>
> linking kernel.debug
> uipc_syscalls.o(.text+0x3c1): In function `sctp_generic_recvmsg':
> ../../../kern/uipc_syscalls.c:2608: undefined reference to
> `sctp_sorecvmsg'
> uipc_syscalls.o(.text+0x21a2): In function
> `sctp_generic_sendmsg_iov':
> ../../../kern/uipc_syscalls.c:2486: undefined reference to
> `sctp_lower_sosend'
> uipc_syscalls.o(.text+0x249d): In function `sctp_generic_sendmsg':
> ../../../kern/uipc_syscalls.c:2379: undefined reference to
> `sctp_lower_sosend'
> uipc_syscalls.o(.text+0x266c): In function `sctp_peeloff':
> ../../../kern/uipc_syscalls.c:2246: undefined reference to
> `sctp_can_peel_off'
> uipc_syscalls.o(.text+0x28e6):../../../kern/uipc_syscalls.c:2287:
> undefined reference to `sctp_do_peeloff'
> rtsock.o(.text+0xb7d): In function `rt_newaddrmsg':
> ../../../net/rtsock.c:897: undefined reference to `sctp_addr_change'
> in_proto.o(.data+0xa8): undefined reference to `sctp_input'
> in_proto.o(.data+0xb0): undefined reference to `sctp_ctlinput'
> in_proto.o(.data+0xb4): undefined reference to `sctp_ctloutput'
> in_proto.o(.data+0xbc): undefined reference to `sctp_init'
> in_proto.o(.data+0xc8): undefined reference to `sctp_drain'
> in_proto.o(.data+0xcc): undefined reference to `sctp_usrreqs'
> in_proto.o(.data+0xdc): undefined reference to `sctp_input'
> in_proto.o(.data+0xe4): undefined reference to `sctp_ctlinput'
> in_proto.o(.data+0xe8): undefined reference to `sctp_ctloutput'
> in_proto.o(.data+0xfc): undefined reference to `sctp_drain'
> in_proto.o(.data+0x100): undefined reference to `sctp_usrreqs'
> in_proto.o(.data+0x110): undefined reference to `sctp_input'
> in_proto.o(.data+0x118): undefined reference to `sctp_ctlinput'
> in_proto.o(.data+0x11c): undefined reference to `sctp_ctloutput'
> in_proto.o(.data+0x130): undefined reference to `sctp_drain'
> in_proto.o(.data+0x134): undefined reference to `sctp_usrreqs'
>
> *** Error code 1
>
> Stop in /usr/src/sys/i386/compile/WWW.
> WWW#
>
> My Config file is as follows:
>
> #
> # GENERIC -- Generic kernel configuration file for FreeBSD/i386
> #
> # For more information on this file, please read the handbook section
> on
> # Kernel Configuration Files:
> #
> #
> http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
>
> #
> # The handbook is also available locally in /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise always see the
> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed explanations of the
>
> # device lines is also present in the ../../conf/NOTES and NOTES
> files.
> # If you are in doubt as to the purpose or necessity of a line, check
> first
> # in NOTES.
> #
> # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.474.2.2.2.1 2008/02/06
> 03:24:28 scottl Exp $
>
> #cpu I486_CPU
> #cpu I586_CPU
> cpu I686_CPU
> ident WWW
>
> # To statically compile in device wiring instead of
> /boot/device.hints
> #hints "GENERIC.hints" # Default places to look for devices.
>
> makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
>
> options SCHED_4BSD # 4BSD scheduler
> options PREEMPTION # Enable kernel thread preemption
> options INET # InterNETworking
> #options INET6 # IPv6 communications protocols
> options SCTP # Stream Control Transmission Protocol
> options FFS # Berkeley Fast Filesystem
> options SOFTUPDATES # Enable FFS soft updates support
> options UFS_ACL # Support for access control lists
> options UFS_DIRHASH # Improve performance on big directories
> options UFS_GJOURNAL # Enable gjournal-based UFS journaling
> options MD_ROOT # MD is a potential root device
> #options NFSCLIENT # Network Filesystem Client
> #options NFSSERVER # Network Filesystem Server
> #options NFS_ROOT # NFS usable as /, requires NFSCLIENT
> #options MSDOSFS # MSDOS Filesystem
> options CD9660 # ISO 9660 Filesystem
> options PROCFS # Process filesystem (requires PSEUDOFS)
> options PSEUDOFS # Pseudo-filesystem framework
> options GEOM_PART_GPT # GUID Partition Tables.
> options GEOM_LABEL # Provides labelization
> options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
> options COMPAT_FREEBSD4 # Compatible with FreeBSD4
> options COMPAT_FREEBSD5 # Compatible with FreeBSD5
> options COMPAT_FREEBSD6 # Compatible with FreeBSD6
> #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
> options KTRACE # ktrace(1) support
> options SYSVSHM # SYSV-style shared memory
> options SYSVMSG # SYSV-style message queues
> options SYSVSEM # SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
> extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options ADAPTIVE_GIANT # Giant mutex is adaptive.
> options STOP_NMI # Stop CPUS using NMI instead of IPI
> options AUDIT # Security event auditing
>
> # To make an SMP kernel, the next two lines are needed
> options SMP # Symmetric MultiProcessor Kernel
> device apic # I/O APIC
>
> #IPFIREWALL
> options IPFIREWALL #firewall
> options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
> options IPFIREWALL_FORWARD #enable transparent proxy support
> options IPFIREWALL_VERBOSE_LIMIT=10 #limit verbosity
> options IPDIVERT
> options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
> options DUMMYNET
> options HZ=2000
> # CPU frequency control
> device cpufreq
>
> # Bus support.
> device eisa
> device pci
>
> # Floppy drives
> #device fdc
>
> # ATA and ATAPI devices
> device ata
> device atadisk # ATA disk drives
> device ataraid # ATA RAID drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> #device atapist # ATAPI tape drives
> options ATA_STATIC_ID # Static device numbering
>
> # SCSI Controllers
> #device ahb # EISA AHA1742 family
> #device ahc # AHA2940 and onboard AIC7xxx devices
> #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~128k to driver.
> #device ahd # AHA39320/29320 and onboard AIC79xx devices
> #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~215k to driver.
> #device amd # AMD 53C974 (Tekram DC-390(T))
> #device hptiop # Highpoint RocketRaid 3xxx series
> #device isp # Qlogic family
> #device ispfw # Firmware for QLogic HBAs- normally a module
> #device mpt # LSI-Logic MPT-Fusion
> #device ncr # NCR/Symbios Logic
> #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
> #device trm # Tekram DC395U/UW/F DC315U adapters
>
> #device adv # Advansys SCSI adapters
> #device adw # Advansys wide SCSI adapters
> #device aha # Adaptec 154x SCSI adapters
> #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
> #device bt # Buslogic/Mylex MultiMaster SCSI adapters
>
> #device ncv # NCR 53C500
> #device nsp # Workbit Ninja SCSI-3
> #device stg # TMC 18C30/18C50
>
> # SCSI peripherals
> #device scbus # SCSI bus (required for SCSI)
> #device ch # SCSI media changers
> #device da # Direct Access (disks)
> #device sa # Sequential Access (tape etc)
> #device cd # CD
> #device pass # Passthrough device (direct SCSI access)
> #device ses # SCSI Environmental Services (and SAF-TE)#
>
> # RAID controllers interfaced to the SCSI subsystem
> #device amr # AMI MegaRAID
> #device arcmsr # Areca SATA II RAID
> #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
> #device ciss # Compaq Smart RAID 5*
> #device dpt # DPT Smartcache III, IV - See NOTES for options
> #device hptmv # Highpoint RocketRAID 182x
> #device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
> #device iir # Intel Integrated RAID
> #device ips # IBM (Adaptec) ServeRAID
> #device mly # Mylex AcceleRAID/eXtremeRAID
> #device twa # 3ware 9000 series PATA/SATA RAID
>
> # RAID controllers
> #device aac # Adaptec FSA RAID
> #device aacp # SCSI passthrough for aac (requires CAM)
> #device ida # Compaq Smart RAID
> #device mfi # LSI MegaRAID SAS
> #device mlx # Mylex DAC960 family
> #device pst # Promise Supertrak SX6000
> #device twe # 3ware ATA RAID
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
>
> #device kbdmux # keyboard multiplexer
>
> device vga # VGA video card driver
>
> #device splash # Splash screen and screen saver support
>
> # syscons is the default console driver, resembling an SCO console
> device sc
>
> device agp # support several AGP chipsets
>
> # Power management support (see NOTES for more options)
> #device apm
> # Add suspend/resume support for the i8254.
> device pmtimer
>
> # PCCARD (PCMCIA) support
> # PCMCIA and cardbus bridge support
> #device cbb # cardbus (yenta) bridge
> #device pccard # PC Card (16-bit) bus
> #device cardbus # CardBus (32-bit) bus
>
> # Serial (COM) ports
> #device sio # 8250, 16[45]50 based serial ports
> #device uart # Generic UART driver
>
> # Parallel port
> #device ppc
> #device ppbus # Parallel port bus (required)
> #device lpt # Printer
> #device plip # TCP/IP over parallel
> #device ppi # Parallel port interface device
> #device vpo # Requires scbus and da
>
> # If you've got a "dumb" serial or parallel PCI card that is
> # supported by the puc(4) glue driver, uncomment the following
> # line to enable it (connects to sio, uart and/or ppc drivers):
> #device puc
>
> # PCI Ethernet NICs.
> device de # DEC/Intel DC21x4x (``Tulip'')
> device em # Intel PRO/1000 adapter Gigabit Ethernet Card
> device ixgb # Intel PRO/10GbE Ethernet Card
> device le # AMD Am7900 LANCE and Am79C9xx PCnet
> device txp # 3Com 3cR990 (``Typhoon'')
> #device vx # 3Com 3c590, 3c595 (``Vortex'')
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use
> these NICs!
> device miibus # MII bus support
> device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
> #device bfe # Broadcom BCM440x 10/100 Ethernet
> device bge # Broadcom BCM570xx Gigabit Ethernet
> #device dc # DEC/Intel 21143 and various workalikes
> device fxp # Intel EtherExpress PRO/100B (82557, 82558)
> device lge # Level 1 LXT1001 gigabit Ethernet
> device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
> device nfe # nVidia nForce MCP on-board Ethernet
> #device nge # NatSemi DP83820 gigabit Ethernet
> #device nve # nVidia nForce MCP on-board Ethernet Networking
> #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
> #device re # RealTek 8139C+/8169/8169S/8110S
> device rl # RealTek 8129/8139
> #device sf # Adaptec AIC-6915 (``Starfire'')
> #device sis # Silicon Integrated Systems SiS 900/SiS 7016
> device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
> device ste # Sundance ST201 (D-Link DFE-550TX)
> device stge # Sundance/Tamarack TC9021 gigabit Ethernet
> device ti # Alteon Networks Tigon I/II gigabit Ethernet
> device tl # Texas Instruments ThunderLAN
> #device tx # SMC EtherPower II (83c170 ``EPIC'')
> #device vge # VIA VT612x gigabit Ethernet
> #device vr # VIA Rhine, Rhine II
> #device wb # Winbond W89C840F
> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
> # ISA Ethernet NICs. pccard NICs included.
> device cs # Crystal Semiconductor CS89x0 NIC
> # 'device ed' requires 'device miibus'
> #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
> #device ex # Intel EtherExpress Pro/10 and Pro/10+
> #device ep # Etherlink III based cards
> #device fe # Fujitsu MB8696x based cards
> #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
> #device sn # SMC's 9000 series of Ethernet chips
> #device xe # Xircom pccard Ethernet
>
> # Wireless NIC cards
> #device wlan # 802.11 support
> #device wlan_wep # 802.11 WEP support
> #device wlan_ccmp # 802.11 CCMP support
> #device wlan_tkip # 802.11 TKIP support
> #device wlan_amrr # AMRR transmit rate control algorithm
> #device wlan_scan_ap # 802.11 AP mode scanning
> #device wlan_scan_sta # 802.11 STA mode scanning
> #device an # Aironet 4500/4800 802.11 wireless NICs.
> #device ath # Atheros pci/cardbus NIC's
> #device ath_hal # Atheros HAL (Hardware Access Layer)
> #device ath_rate_sample # SampleRate tx rate control for ath
> #device awi # BayStack 660 and others
> #device ral # Ralink Technology RT2500 wireless NICs.
> #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
> #device wl # Older non 802.11 Wavelan wireless NIC.
>
> # Pseudo devices.
> device loop # Network loopback
> device random # Entropy device
> device ether # Ethernet support
> #device sl # Kernel SLIP
> device ppp # Kernel PPP
> device tun # Packet tunnel.
> device pty # Pseudo-ttys (telnet etc)
> device md # Memory "disks"
> device gif # IPv6 and IPv4 tunneling
> #device faith # IPv6-to-IPv4 relaying (translation)
> device firmware # firmware assist module
>
> # The `bpf' device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> # Note that 'bpf' is required for DHCP.
> device bpf # Berkeley packet filter
>
> # USB support
> #device uhci # UHCI PCI->USB interface
> #device ohci # OHCI PCI->USB interface
> #device ehci # EHCI PCI->USB interface (USB 2.0)
> #device usb # USB Bus (required)
> #device udbp # USB Double Bulk Pipe devices
> #device ugen # Generic
> #device uhid # "Human Interface Devices"
> #device ukbd # Keyboard
> #device ulpt # Printer
> #device umass # Disks/Mass storage - Requires scbus and da
> #device ums # Mouse
> #device ural # Ralink Technology RT2500USB wireless NICs
> #device rum # Ralink Technology RT2501USB wireless NICs
> #device urio # Diamond Rio 500 MP3 player
> #device uscanner # Scanners
> # USB Ethernet, requires miibus
> #device aue # ADMtek USB Ethernet
> #device axe # ASIX Electronics USB Ethernet
> #device cdce # Generic USB over Ethernet
> #device cue # CATC USB Ethernet
> #device kue # Kawasaki LSI USB Ethernet
> #device rue # RealTek RTL8150 USB Ethernet
>
> # FireWire support
> #device firewire # FireWire bus code
> #device sbp # SCSI over FireWire (Requires scbus and da)
> #device fwe # Ethernet over FireWire (non-standard!)
> #device fwip # IP over FireWire (RFC 2734,3146)
> #device dcons # Dumb console driver
> #device dcons_crom # Configuration ROM for dcons
> Thanks,
> Alex
>
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
>