apache 2.2.8 uid 80: exited on signal 4
Wael Nasreddine
mla at nasreddine.com
Fri Mar 14 20:58:15 UTC 2008
This One Time, at Band Camp, Wael Nasreddine <mla at nasreddine.com> said, On Fri, Mar 14, 2008 at 08:42:03PM +0100:
> This One Time, at Band Camp, Kevin Downey <redchin at gmail.com> said, On Fri, Mar 14, 2008 at 11:14:59AM -0700:
> > I had a similar problem. I fixed it my commenting out one of the
> > extensions listed in /usr/local/etc/php/extensions.ini
> > I forgot which one. I currently have three of them commented out:
> > #extension=mcrypt.so
> > #extension=mbstring.so
> > #extension=mhash.so
> I have commented the same modules that you have... I will try with it
> this way and see if it happens again...
> Thanks
Ok that actually does work, I did more tests and the modules causing
this are
extension=mbstring.so
extension=mcrypt.so
both of them cause the Segfault(11) the nhash.so module is ok...
Thanks
> > On Fri, Mar 14, 2008 at 10:55 AM, Wael Nasreddine <mla at nasreddine.com> wrote:
> > > This One Time, at Band Camp, Mel <fbsd.questions at rachie.is-a-geek.net> said, On Fri, Mar 14, 2008 at 06:32:40PM +0100:
> > > > On Friday 14 March 2008 16:32:30 Abdullah Ibn Hamad Al-Marri wrote:
> > > > > Hello,
> > > > > I have this problem with apache 2.2.8, and I don't know the reason yet.
> > > > > FreeBSD 7.0-STABLE #0: Fri Feb 29 16:57:56 UTC 2008
> > > > > admin at BB.WeArab.Net:/usr/obj/usr/src/sys/BB
> > > > > Timecounter "i8254" frequency 1193182 Hz quality 0
> > > > > CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz K8-class CPU)
> > > > > Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
> > > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
> > > > >A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > > > > Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR>
> > > > > AMD Features=0x20100800<SYSCALL,NX,LM>
> > > > > Logical CPUs per core: 2
> > > > > usable memory = 2139377664 (2040 MB)
> > > > > avail memory = 2064826368 (1969 MB)
> > > > > ACPI APIC Table: <IntelR AWRDACPI>
> > > > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > > > > cpu0 (BSP): APIC ID: 0
> > > > > cpu1 (AP): APIC ID: 1
> > > > > ioapic0: Changing APIC ID to 4
> > > > > ioapic0 <Version 2.0> irqs 0-23 on motherboard
> > > > > ioapic1 <Version 2.0> irqs 24-47 on motherboard
> > > > > acpi0: <IntelR AWRDACPI> on motherboard
> > > > > acpi0: [ITHREAD]
> > > > > acpi0: Power Button (fixed)
> > > > > acpi0: reservation of 0, a0000 (3) failed
> > > > > acpi0: reservation of 100000, 7fde0000 (3) failed
> > > > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> > > > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> > > > > cpu0: <ACPI CPU> on acpi0
> > > > > p4tcc0: <CPU Frequency Thermal Control> on cpu0
> > > > > cpu1: <ACPI CPU> on acpi0
> > > > > p4tcc1: <CPU Frequency Thermal Control> on cpu1
> > > > > acpi_button0: <Power Button> on acpi0
> > > > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > > > > pci0: <ACPI PCI bus> on pcib0
> > > > > pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> > > > > pci1: <PCI bus> on pcib1
> > > > > pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> > > > > pci2: <ACPI PCI bus> on pcib2
> > > > > em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
> > > > > 0x9000-0x901f mem 0xf9020000-0xf903ffff,0xf9000000-0xf901ffff irq 18 at
> > > > > device 1.0 on pci2 em0: Ethernet address: 00:11:d8:ba:51:8d
> > > > > em0: [FILTER]
> > > > > pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> > > > > pci3: <ACPI PCI bus> on pcib3
> > > > > vgapci0: <VGA-compatible display> port 0xa000-0xa0ff mem
> > > > > 0xfa000000-0xfaffffff,0xfc000000-0xfc000fff irq 24 at device 2.0 on pci3
> > > > > pci0: <serial bus, USB> at device 29.0 (no driver attached)
> > > > > pci0: <serial bus, USB> at device 29.1 (no driver attached)
> > > > > pci0: <base peripheral> at device 29.4 (no driver attached)
> > > > > pci0: <serial bus, USB> at device 29.7 (no driver attached)
> > > > > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> > > > > pci4: <ACPI PCI bus> on pcib4
> > > > > atapci0: <Promise PDC20319 SATA150 controller> port
> > > > > 0xb000-0xb03f,0xb400-0xb40f,0xb800-0xb87f mem
> > > > > 0xfd020000-0xfd020fff,0xfd000000-0xfd01ffff irq 23 at device 4.0 on pci4
> > > > > atapci0: [ITHREAD]
> > > > > atapci0: [ITHREAD]
> > > > > ata2: <ATA channel 0> on atapci0
> > > > > ata2: [ITHREAD]
> > > > > ata3: <ATA channel 1> on atapci0
> > > > > ata3: [ITHREAD]
> > > > > ata4: <ATA channel 2> on atapci0
> > > > > ata4: [ITHREAD]
> > > > > ata5: <ATA channel 3> on atapci0
> > > > > ata5: [ITHREAD]
> > > > > isab0: <PCI-ISA bridge> at device 31.0 on pci0
> > > > > isa0: <ISA bus> on isab0
> > > > > atapci1: <Intel 6300ESB SATA150 controller> port
> > > > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 18 at device 31.2 on
> > > > > pci0 ata0: <ATA channel 0> on atapci1
> > > > > ata0: [ITHREAD]
> > > > > ata1: <ATA channel 1> on atapci1
> > > > > ata1: [ITHREAD]
> > > > > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> > > > > pci0: <multimedia, audio> at device 31.5 (no driver attached)
> > > > > sio0: configured irq 4 not in bitmap of probed irqs 0
> > > > > sio0: port may not be enabled
> > > > > sio0: configured irq 4 not in bitmap of probed irqs 0
> > > > > sio0: port may not be enabled
> > > > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> > > > > acpi0 sio0: type 16550A
> > > > > sio0: [FILTER]
> > > > > sio1: configured irq 3 not in bitmap of probed irqs 0
> > > > > sio1: port may not be enabled
> > > > > sio1: configured irq 3 not in bitmap of probed irqs 0
> > > > > sio1: port may not be enabled
> > > > > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> > > > > sio1: type 16550A
> > > > > sio1: [FILTER]
> > > > > orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
> > > > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> > > > > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > > > > kbd0 at atkbd0
> > > > > atkbd0: [GIANT-LOCKED]
> > > > > atkbd0: [ITHREAD]
> > > > > sc0: <System console> at flags 0x100 on isa0
> > > > > sc0: VGA <16 virtual consoles, flags=0x300>
> > > > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> > > > > Timecounters tick every 1.000 msec
> > > > > ad0: 238475MB <WDC WD2500JD-50FYB0 02.05D02> at ata0-master SATA150
> > > > > ad4: 238475MB <WDC WD2500JD-50FYB0 02.05D02> at ata2-master SATA150
> > > > > ad6: 381554MB <WDC WD4000KD-00NAB0 01.06A01> at ata3-master SATA150
> > > > > SMP: AP CPU #1 Launched!
> > > > > Trying to mount root from ufs:/dev/ad0s1a
> > > > > em0: link state changed to UP
> > > > > pid 8458 (httpd), uid 80: exited on signal 4
> > > > > pid 82334 (httpd), uid 80: exited on signal 4
> > > > > pid 82374 (httpd), uid 80: exited on signal 4
> > > > > pid 82375 (httpd), uid 80: exited on signal 4
> > > > > pid 82423 (httpd), uid 80: exited on signal 4
> > > > > pid 82520 (httpd), uid 80: exited on signal 4
> > > > > pid 88487 (httpd), uid 80: exited on signal 4
> > > > > pid 98657 (httpd), uid 80: exited on signal 4
> > > > > pid 52780 (httpd), uid 80: exited on signal 4
> > > > > pid 58619 (httpd), uid 80: exited on signal 4
> > > > #define SIGILL 4 /* illegal instr. (not reset when caught) */
> > > > If you're sure there are no CPU specific flags set during apache compilation,
> > > > you might want to get a core dump. Is apache the only program creating
> > > > SIGILL?
> > > I'm having a similar issue, ny dmesg is filled with
> > > -------- CUT
> > > pid 63364 (httpd), uid 80: exited on signal 11
> > > -------- CUT
> > > my /etc/make.conf:
> > > -------- CUT
> > > CFLAGS+="-march=pentium4"
> > > WITHOUT_X11=yes
> > > WITHOUT_JAVA=yes
> > > # Use Perl with threads
> > > WITH_THREADS=yes
> > > # added by use.perl 2008-03-13 22:04:11
> > > PERL_VER=5.8.8
> > > PERL_VERSION=5.8.8
> > > -------- CUT
> > > what could be the problem...
> > > --
> > > Wael Nasreddine
> > > http://wael.nasreddine.com
> > > PGP: 1024D/C8DD18A2 06F6 1622 4BC8 4CEB D724 DE12 5565 3945 C8DD 18A2
> > > .: An infinite number of monkeys typing into GNU emacs,
> > > would never make a good program. (L. Torvalds 1995) :.
--
Wael Nasreddine
http://wael.nasreddine.com
PGP: 1024D/C8DD18A2 06F6 1622 4BC8 4CEB D724 DE12 5565 3945 C8DD 18A2
.: An infinite number of monkeys typing into GNU emacs,
would never make a good program. (L. Torvalds 1995) :.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20080314/0fed13a9/attachment.pgp
More information about the freebsd-questions
mailing list