Howto get k3b to detect my Burner

[Warren Liddell]

> Ok, it should be working. If you have an iso file and an empty CD at
> hand try something like this:
>
> cdrecord -v -dao speed=24 driveropts=burnfree dev=3,0,0 mytest.iso
>
> and see if it actually records it.


Cdrecord-Clone 2.01 (amd64-unknown-freebsd6.3) Copyright (C) 1995-2004 Jörg 
Schilling
TOC Type: 1 = CD-ROM
scsidev: '3,0,0'
scsibus: 3 target: 0 lun: 0
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 0
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'TSSTcorp'
Identifikation : 'CDDVDW SH-S203D '
Revision       : 'SB00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0010
Profile: 0x0015
Profile: 0x0016
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0012
Profile: 0x0011
Profile: 0x0010 (current)
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
Profile: 0x0002
cdrecord: Found DVD media but DVD-R/DVD-RW support code is missing.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for 
cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at 
ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for 
cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at 
ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc   CD/DVD driver (checks media) (mmc_cd_dvd).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1712128 = 1672 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data     0 MB         padsize:  598 KB
Total size:        0 MB (00:04.00) = 300 sectors
Lout start:        1 MB (00:06/00) = 300 sectors
Current Secsize: 2048
cdrecord: Unspecified command not implemented for this drive.
Starting to write CD/DVD at speed 0 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Writing pregap for track 2 at -150
cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 
0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 200s
write track pad data: error after 0 bytes
BFree: 0 K BSize: 1672 K
Starting new track at sector: 0
Track 02:    0 of    0 MB written.
WARNING: padding up to secsize.
cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB:  2A 00 00 00 00 00 00 00 01 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 
0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 200s
write track data: error after 0 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing  time:    5.006s
Average write speed   0.8x.
Fixating...
Fixating time:    0.000s
cdrecord: fifo had 1 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.