DVD Writer problems
Jerahmy Pocott
quakenet1 at optusnet.com.au
Wed Jun 4 14:37:36 UTC 2008
Hello,
I'v been having problems getting this DVD drive working at all, I'm
running on 6.3 p1..
On boot it is detected as:
acd0: DMA limited to UDMA33, controller found non-ATA66 cable
acd0: DVDR <ATAPI DVD A DH20A4P/9P57> at ata0-master UDMA33
Which is the first sign of trouble, it is connected by an ATA66
capable cable and I'v tried swapping over the cable to rule out a
faulty cable and the message is the same.
It is connected to:
atapci0: <Intel ICH6 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device
31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
When trying to use burncd on it, the drives light flashes for a while
then after a delay I get:
acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00
On the console and any further attempt to use the drive results in
that message being repeated without any delay, also trying to use the
atapiscsi device results in a similar message:
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
Any thoughts on what problem here is? It seems that the controller
isn't working properly with it?
Cheers,
J.
More information about the freebsd-questions
mailing list