Resolution too high with 7-RC1, nVidia, xorg
Xn Nooby
xnooby at gmail.com
Tue Jan 1 10:02:24 PST 2008
I was able to temporarily change the resolution using the "xrandr -s
1024x768" command - but "xvidtune -show" still displayed a modeline
that begins with "1280x1024". I copied that modeline to my xorg.conf,
and manually changed the resolution, but I did not fool it. It was
great to see the screen at 1024x768, so I know it can do it.
I added a "1280x1024" mode to my xorg.conf display list, and it not
change the behavior.
I was able to get 1280x960 by increasing the lower range for
VertRefresh to 70, and was able to get 800x600 by increasing it to 75.
I then played around with various other VertRefresh values, but had no
luck. I also tried the Horizontal values, but the did not help. I'm
using a flat-panel screen, so I don't think I can hurt it. I hope!
xrandr worked, though my IceWM menubar fell off my screen. xvidtune
could probaly fix that, if I could get the ModeLine command to have an
effect.
On Jan 1, 2008 12:09 PM, Ashish Shukla आशीष शुक्ल <wahjava.ml at gmail.com> wrote:
> >>>>> "Xn" == Xn Nooby <xnooby at gmail.com> writes:
> >> To make things obvious you will have to take a look at your xorg.conf file
> >> Please do change dir to its parent folder (cd /etx/X11/) and run
> >> cat xorg.conf | tr -s "\n" | grep -v "#"
> >> that should make your xorg.conf look simple and clear.
>
> Xn> Here is mine, which still wont go in to 1024x768 mode:
>
> You've 3 options:
>
> Xn> SubSection "Display"
> Xn> Viewport 0 0
> Xn> Depth 24
> Xn> Modes "1024x768" "800x600"
>
>
> 1. How about appending "1280x1024" to the above line. AFAIK, these modes
> are listed in the order of preference. See, if it works.
>
> 2. Another thing you can try, is to change the "VertRefresh", and
> "HorizRefresh" limits of your monitor, change them in such a way, so
> that X server won't be able to display 1280x1024 mode, resulting in
> switch to 1024x768 mode. Since 1280x1024 requires a lower refresh rate
> as compared to 1024x768, so .e.g. if 1280x1024 works on 60 Hz
> (vertical refresh rate), and 1024x768 is available in 60 Hz, 75 Hz, 85
> Hz, then you can increase lower limit of VertRefresh, to something
> greater than 60.
>
> 3. Another thing you can try is mode setting, switch to 1024x768 using
> xrandr. And then use "xvidtune -show" to generate modeline,
>
> abbe at chateau ~ $ xrandr -s 1024x768
>
> Now, in 1024x768 mode, enter this:
>
> abbe at chatteau ~ $ xvidtune -show
> "1024x768" 136.75 1024 1536 1688 1936 768 903 909 942 -hsync +vsync
>
> NOTE: Don't use above modeline, thats from 1440x900 resolution, except
> that I changed 1440, 900 to 1024, 768 respectively :) .
>
> Now copy above modeline, and add to the "Monitor" section of your
> "xorg.conf" as show below:
>
> ModeLine "1024x768" 136.75 1024 1536 1688 1936 768 903 909 942 -hsync +vsync
>
>
> HTH
> --
> Ashish Shukla आशीष शुक्ल http://wahjava.wordpress.com/
> ·-- ·- ···· ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- --
>
More information about the freebsd-questions
mailing list