USB Mouse not working

[bataa]

Hi , 

I got same problem the mouse is not working under Xwindows. 
I solved it anyway. 
I installed freebsd 6.2. 
Problem is only xorg.conf.  you should copy Xorg.config.new to xorg.conf in
X11 directory. 
Then it should be ok. 

Good luck



Fabio Pennati wrote:
> 
> 
>    I am a new FreeBSD user coming from Gentoo. I am not able to get
>    working an usb optical  wired mouse from Labtec that is working well
>    with many Linux distro's and WXP too.
>    I am using a FreeBSD 7.0 standard GENERIC kernel configuration with
>    all usb devices installed, thus:
> 
>      # USB support
>      device        uhci        # UHCI PCI->USB interface
>      device        ohci        # OHCI PCI->USB interface
>      device        ehci        # EHCI PCI->USB interface (USB 2.0)
>      device        usb        # USB Bus (required)
>      #device        udbp        # USB Double Bulk Pipe devices
>      device        ugen        # Generic
>      device        uhid        # "Human Interface Devices"
>      device        ukbd        # Keyboard
>      device        ulpt        # Printer
>      device        umass        # Disks/Mass storage - Requires scbus
>      and da
>      device        ums        # Mouse
> 
>    Here is an extract from my rc.conf:
> 
>      usbd_enable="YES"
>      moused_enable="YES"
>      moused_type="auto"
>      moused_port="/dev/ums0"
>      moused_flags=""
>      usbd_flags=""
>      moused_nondefault_enable="YES"
>      moused_ums0_flags=""
> 
>    I tried also to take out from rc.conf any "moused-stuff" lines but
>    without no results.
>    And here is the messages from kernel during boot, probing ums device:
> 
>      ums0: <vendor 0x1241 product 0x1111, class 0/0, rev 1.00/1.00, addr
>      2> on uhub0
>      ums0: 3 buttons and Z dir.
> 
>    This is the xorg.conf, for the part interesting the mouse:
> 
>      Section "InputDevice"
>          Identifier  "Mouse0"
>          Driver      "mouse"
>          Option        "Protocol" "Auto"
>          Option        "Device" "/dev/sysmouse"
>          Option        "ZAxisMapping" "4 5 6 7"
>      EndSection
> 
>    Furthermore I installed the same mouse with an hw adapter to the
>    serial port of the PC and obviously it works, of course as pms device,
>    but very slowly and with no precision.
>    There is someone that has any idea ?
>    Thanks, Fabio
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
> 
> 

-- 
View this message in context: http://www.nabble.com/USB-Mouse-not-working-tp16307942p16832739.html
Sent from the freebsd-questions mailing list archive at Nabble.com.