Sony Ericsson: (da0:umass-sim0:0:0:0): NOT READY asc:3a, 0 (repeated)

[Snow Mountains]

I posted this question 10 days ago, got no replies. Is it possible
nobody here installed CD release of FreeBSD 6.2 and has Sony Ericsson
mobile phone or something similar which causes similar problem? :-)

Maybe summer time is the cause :-) So let me repeat:

=========

Hi list,

If I plug in my Secure Digital reader with the card from kamera, it is
detected very fine and I can mount using -t msdosfs on /mnt/da0s1.

But I have a little problem when trying to attach my Sony Ericcson
W810 mobile phone to FreeBSD 6.2. See what I get:

umass0: Sony Ericsson Sony Ericsson W810, rev 2.00/0.00, addr 5
umass1: Sony Ericsson Sony Ericsson W810, rev 2.00/0.00, addr 5
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SEMC Int.Memory 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <SEMC Mem-Stick 0000> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error

.................. this block repeats many many times for da0 and da1 too.

umass0: at uhub4 port 1 (addr 5) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass1: at uhub4 port 1 (addr 5) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry

When I plug out the Ericsson,

umass1: detached

Other data: FreeBSD 6.2, straight from instalation cd:
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
   root at dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC

dmesg | grep usb
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0

I searched google, more than 100 results with mistake messages, but
nothing I can really use.

What can be the reason? Do I have to send more data?

with best regards, tnx in advance
SM