KERNEL 7.0 COMPILATION

[Sébastien LEFEVRE]

Hello,

> From /sys/conf/NOTES:
-----
# SCTP is a NEW transport protocol defined by
# RFC2960 updated by RFC3309 and RFC3758.. and
# soon to have a new base RFC and many many more
# extensions. This release supports all the extensions
# including many drafts (most about to become RFC's).
# It is the premeier SCTP implementation in the NET
# and is quite well tested.
#
# Note YOU MUST have both INET and INET6 defined.
# you don't have to enable V6, but SCTP is
# dual stacked and so far we have not teased apart
# the V6 and V4.. since an association can span
# both a V6 and V4 address at the SAME time :-)


I trying it, thanks a lots

Sébastien.




Yuri Pankov <yuri.pankov at gmail.com> a écrit :

> On Monday 19 November 2007 07:01:32 Norberto Meijome wrote:
>> On Sun, 18 Nov 2007 15:34:45 +0100
>>
>> Sébastien LEFEVRE <sebastien at domunix.org> wrote:
>> > /usr/src/sys/net/rtsock.c:897: undefined reference to
>> > `sctp_addr_change' in_proto.o(.data+0xa8): undefined reference to
>> > `sctp_input' in_proto.o(.data+0xb0): undefined reference to
>> > `sctp_ctlinput' in_proto.o(.data+0xb4): undefined reference to
>> > `sctp_ctloutput' in_proto.o(.data+0xbc): undefined reference to
>> > `sctp_init' in_proto.o(.data+0xc8): undefined reference to
>> > `sctp_drain' in_proto.o(.data+0xcc): undefined reference to
>> > `sctp_usrreqs' in_proto.o(.data+0xdc): undefined reference to
>> > `sctp_input' in_proto.o(.data+0xe4): undefined reference to
>> > `sctp_ctlinput' in_proto.o(.data+0xe8): undefined reference to
>> > `sctp_ctloutput' in_proto.o(.data+0xfc): undefined reference to
>> > `sctp_drain' in_proto.o(.data+0x100): undefined reference to
>> > `sctp_usrreqs' in_proto.o(.data+0x110): undefined reference to
>> > `sctp_input' in_proto.o(.data+0x118): undefined reference to
>> > `sctp_ctlinput' in_proto.o(.data+0x11c): undefined reference to
>> > `sctp_ctloutput' in_proto.o(.data+0x130): undefined reference to
>> > `sctp_drain' in_proto.o(.data+0x134): undefined reference to
>> > `sctp_usrreqs' *** Error code 1
>> >
>> > Stop in /usr/obj/usr/src/sys/GENERIC.
>> > *** Error code 1
>> >
>> > Stop in /usr/src.
>> > *** Error code 1
>> >
>> > Stop in /usr/src.
>> >
>> >
>> > Why?
>>
>> Hi Sebastien,
>> If you look closely at all the errors, they all refer to SCTP , which
>> is a newish protocol. It was added by default to 7.0's tree. I
>> suspect you are using an old kernel config file, and you don't have
>> that option, and 7's IPFW needs it.
>>
>> look in /usr/src/sys/conf/NOTES  for how it is defined :)
>>
>> good luck,
>> B
>> _________________________
>> {Beto|Norberto|Numard} Meijome
>>
>> "I'm not afraid of dying, I just don't want to be there when it
>> happens." Woody Allen
>>
>> I speak for myself, not my employer. Contents may be hot. Slippery
>> when wet.. Reading disclaimers makes you go blind. Writing them is
>> worse. You have been Warned.
>
> http://lists.freebsd.org/pipermail/freebsd-questions/2007-November/161773.html
>
>
> Yuri
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>



----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.