KERNEL 7.0 COMPILATION

[Norberto Meijome]

On Sun, 18 Nov 2007 15:34:45 +0100
Sébastien LEFEVRE <sebastien at domunix.org> wrote:

> /usr/src/sys/net/rtsock.c:897: undefined reference to `sctp_addr_change'
> in_proto.o(.data+0xa8): undefined reference to `sctp_input'
> in_proto.o(.data+0xb0): undefined reference to `sctp_ctlinput'
> in_proto.o(.data+0xb4): undefined reference to `sctp_ctloutput'
> in_proto.o(.data+0xbc): undefined reference to `sctp_init'
> in_proto.o(.data+0xc8): undefined reference to `sctp_drain'
> in_proto.o(.data+0xcc): undefined reference to `sctp_usrreqs'
> in_proto.o(.data+0xdc): undefined reference to `sctp_input'
> in_proto.o(.data+0xe4): undefined reference to `sctp_ctlinput'
> in_proto.o(.data+0xe8): undefined reference to `sctp_ctloutput'
> in_proto.o(.data+0xfc): undefined reference to `sctp_drain'
> in_proto.o(.data+0x100): undefined reference to `sctp_usrreqs'
> in_proto.o(.data+0x110): undefined reference to `sctp_input'
> in_proto.o(.data+0x118): undefined reference to `sctp_ctlinput'
> in_proto.o(.data+0x11c): undefined reference to `sctp_ctloutput'
> in_proto.o(.data+0x130): undefined reference to `sctp_drain'
> in_proto.o(.data+0x134): undefined reference to `sctp_usrreqs'
> *** Error code 1
> 
> Stop in /usr/obj/usr/src/sys/GENERIC.
> *** Error code 1
> 
> Stop in /usr/src.
> *** Error code 1
> 
> Stop in /usr/src.
> 
> 
> Why?

Hi Sebastien,
If you look closely at all the errors, they all refer to SCTP , which is a newish protocol. It was added by default to 7.0's tree. I suspect you are using an old kernel config file, and you don't have that option, and 7's IPFW needs it.

look in /usr/src/sys/conf/NOTES  for how it is defined :)

good luck,
B
_________________________
{Beto|Norberto|Numard} Meijome

"I'm not afraid of dying, I just don't want to be there when it happens."
  Woody Allen

I speak for myself, not my employer. Contents may be hot. Slippery when wet. Reading disclaimers makes you go blind. Writing them is worse. You have been Warned.