Help needed syncing Palm Treo 650 with FreeBSD

Aniruddha mailing_list at planet.nl
Fri Mar 9 16:49:42 UTC 2007


Aniruddha wrote:
> I am trying to get my Palm Treo sync with Jpilot. Unfortunately so far 
> without results :-( . Who can help me with this? Here's what I tried 
> so far:
>
> Added this line to etc/usbd.conf just above the fallthrough entry:
> /
> device "Palm"
>       devname  "ucom[0-9]*"
>       attach "chmod 0666 /dev/ucom* /dev/ttyU* /dev/cuaU*"/
>
> /kldload ucom
> kldload uvisor
> /
> Filled in this 'adress' in jpilot:
>
> //dev/ttyU0/
> _______________________________________________
>
Here's my dmesg (with my Treo plugged in at boot). Maybe that will help:

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
    root at dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 4000+ (2403.09-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f71  Stepping = 1
 
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x1<LAHF>
real memory  = 1073414144 (1023 MB)
avail memory = 1033031680 (985 MB)
ACPI APIC Table: <A M I  OEMAPIC >
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA K8T800Pro host to PCI bridge> mem 0xdc000000-0xdfffffff at
device 0.0
 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 7800 GS> mem
0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfa0
00000-0xfaffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
fwohci0: <VIA Fire II (VT6306)> port 0x9400-0x947f mem
0xf9600000-0xf96007ff irq
 16 at device 7.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:58:84:0d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:58:84:0d
fwe0: Ethernet address: 02:11:d8:58:84:0d
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port
0xa400-0xa43f,0xa000-0xa00f,
0x9800-0x987f mem 0xf9800000-0xf9800fff,0xf9700000-0xf971ffff irq 18 at
device 8
.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff mem
0xf9a00000-0xf9a03fff ir
q 17 at device 10.0 on pci0
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:13:d4:9b:6b:c8
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
pci0: <multimedia, audio> at device 14.0 (no driver attached)
pci0: <input device> at device 14.1 (no driver attached)
fwohci1: <1394 Open Host Controller Interface> mem
0xf9c00000-0xf9c007ff,0xf9b00
000-0xf9b03fff irq 16 at device 14.2 on pci0
fwohci1: OHCI version 1.10 (ROM=0)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:02:3c:01:01:00:e8:de
fwohci1: Phy 1394a available S400, 2 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:02:3c:00:e8:de
fwe1: Ethernet address: 02:02:3c:00:e8:de
fwe1: if_start running deferred for Giant
sbp1: <SBP-2/SCSI over FireWire> on firewire1
fwohci1: Initiate bus reset
fwohci1: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire1: bus manager 0 (me)
atapci1: <VIA 6420 SATA150 controller> port
0xd400-0xd407,0xd000-0xd003,0xc800-0
xc807,0xc400-0xc403,0xc000-0xc00f,0xb800-0xb8ff irq 20 at device 15.0 on
pci0
ata5: <ATA channel 0> on atapci1
ata6: <ATA channel 1> on atapci1
atapci2: <VIA 8237 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,
0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device
16.0 on p
ci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device
16.1 on p
ci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device
16.2 on p
ci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 21 at device
16.3 on p
ci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf9e00000-0xf9e000ff irq 21
at devic
e 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: Generic USB TO IDE Bridge, rev 2.00/1.00, addr 2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP/ECP_RLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5> PJL,MLC,PCL,PCLXL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on
acpi0
sio0: type 16550A
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
1.10/3.00, add
r 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhub5: vendor 0x03eb Standard USB Hub, class 9/0, rev 1.10/3.00, addr 3
uhub5: 4 ports with 4 removable, bus powered
ukbd0: Ideazon Zboard, rev 1.10/10.98, addr 4, iclass 3/1
kbd2 at ukbd0
uhid0: Ideazon Zboard, rev 1.10/10.98, addr 4, iclass 3/1
uhid1: vendor 0x046d product 0xc214, rev 1.10/2.05, addr 2, iclass 3/0
uhid1: no report descriptor
device_attach: uhid1 attach returned 6
Timecounter "TSC" frequency 2403088786 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 305245MB <Seagate ST3320620A 3.AAC> at ata0-master UDMA100
ad1: 239372MB <Maxtor 6L250R0 BAH41G10> at ata0-slave UDMA133
acd0: FAILURE - SETFEATURES SET TRANSFER MODE timed out
acd0: DVDROM <LILITE-ON DVD SOHD-16P6P9S/FS07> at ata1-master BIOSPIO
acd1: DVDR <NEC DVD RW ND-2500A/1.06> at ata1-slave UDMA33
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB Disk 9.02> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 76345MB (156355584 512 byte sectors: 255H 63S/T 9732C)
Trying to mount root from ufs:/dev/ad0s2a
NVRM: detected agp.ko, aborting NVIDIA AGP setup!




More information about the freebsd-questions mailing list