Fresh install won't compile requirement libraries for cvsup

[illoai at gmail.com]

On 12/06/07, Andrew Falanga <af300wsm at gmail.com> wrote:
> >
> > If the compiler (cc) dies with a 'fatal signal 11', you could have a
> > memory problem. See e.g. http://www.ibiblio.org/pub/Linux/docs/faqs/GCC-SIG11-FAQ
> >
> > Roland
>
> Ok, while researching these things I found this.  Does FreeBSD have a
> work around?
>
> http://membres.lycos.fr/poulot/k6bug.html
>
> This machine I'm having problems with is an AMD K6.

A K6-700?  Without doing too much
flabulous research, I believe the K6
stopped at 300MHz.  A 700 would be
a K6-III, which would not have the
32MB problem.  Flaky and heat-sen-
sitive they are indeed.  And there is
a lot of junk 133 memory out there
too.

Based on my limited experience, about
60% of the time you can run 100MHz
memory at 133MHz. If not you may have
to rejumper your bus-speed to 100.
If you are further unlucky the board
won't have a 7:1 multiplier and you'll
be stuck underclocking pretty seriously.

This might actually make the machine
useable, though.

-- 
--