CDROM Boot Hangs But Only Under 6.x

NetOpsCenter noc at
Wed Dec 26 11:16:28 PST 2007

illoai at wrote:
> On 25/12/2007, Tim Daneliuk <tundra at> wrote:
>> I am building a new server out of both older and brand new
>> components.  It is based on a Pentium D 925 and ABIT LG-95Z
>> mobo.  The DVD-RW is a Lite-On about a year old with very
>> low hours on it.
>> So ... here's a fun one:  I can boot and install FreeBSD 4.x (CD)
>> or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the
>> DVD.  But attempting to do this with 6.x (I have tried 6.2R and
>> 6.3-PRE disk #1) causes a hang during boot.  The loader gets
>> as far as showing the vertical bar that ordinarily "spins"
>> to show intitial kernel loading progress and the the machine
>> just sits there.  There is some further activity on the optical
>> drive at this point and then the cursor sort of jumps around a bit.
>> I've not yet tried swapping the optical drive out - though I doubt
>> this is the problem since I can load the other OSs.  I've tried
>> removing and moving memory sticks in case this is a flakey
>> memory problem - no change.  I've tried removing the only
>> two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW -
>> no change.
>> I have one last ditch thing I will try later tonight which is
>> to force the DVD IDE port into PIO mode and out of DMA mode.
>> But that's it.  I am stumped.  Ideas anyone?
> If it is not hardware, check your bios settings (and mayhap
> set back to default or very conservative) (of which the PIO
> trick may work).
> Also, 7.0 ran extremely well for me back in Sept., you might
> try it as an alternative.

I had the same problem with a couple of older mobo's . I ended up 
loading 6.* on a hd on a different machine that I knew worked. I 
physically moved it to the problem box and it Worked.

I think the issue could be the size or the type of HD in my case. Some 
older mobo bios jam up when a HD is more than 60 gig I have found.

~Al Plant - Honolulu, Hawaii -  Phone:  808-284-2740
  + + + noc at +
  +   - Supporting - FreeBSD 6.* - 7.* +
"All that's really worth doing is what we do for others."- Lewis Carrol

More information about the freebsd-questions mailing list