Promise SuperTrak EX12350 don't get detected under FreeBSD 6.2

[Ted Mittelstaedt]

Is this FreeBSD 64 or FreeBSD 32 bit?

Ted

> -----Original Message-----
> From: owner-freebsd-questions at freebsd.org
> [mailto:owner-freebsd-questions at freebsd.org]On Behalf Of Göran Nilsson
> Sent: Thursday, December 13, 2007 10:39 AM
> To: Göran Nilsson; freebsd-questions at freebsd.org
> Subject: Re: Promise SuperTrak EX12350 don't get detected under FreeBSD
> 6.2
>
>
> I have come a bit further. It seems that if I create a 2TB drive
> it all goes
> good. But it doesn't seems to work when doing a large 5TB drive.
> Is there some limitations on fdisk, and the size on partitions? Can't it
> exceed 2TB? The machine is a ordinary Core 2 duo 6750 with 4GB of ram.
>
> /Regards Goran
>
> On Dec 13, 2007 5:39 PM, Göran Nilsson <goran.nilsson at gmail.com> wrote:
>
> > On the controller there it says that it supports freebsd 6.1. And yes
> > there is documentation on how to install freebsd 6.1 on the raid.
> > But for now i have installed freebsd on a RAID1 system, and i
> have problem
> > getting the card detcted, i run a 5TB RAID 6 on this card.
> > Didn't thought that it could be that much differens between
> version 6.1and
> > 6.2. Gonna try to reinstall. After the reinstall i got the card up and
> > running. I see it get detected and it all looks ok. I go in and
> do a fdisk
> > on the drive and label/mount it. I do all this in sysinstall.
> > I can see that the drive is 4648GB so it all looks ok with the RAID 6
> > Drive.
> > When i later quit sysinstall and check the mounts i see that the drive
> > space is 532GB and available space is 500GB. This looks totally
> wrong. Is
> > there any limitations that im not aware of?
> >
> > /Goran
> >
> >   On Dec 13, 2007 1:10 AM, Erik Trulsson <ertr1013 at student.uu.se> wrote:
> >
> > >  On Wed, Dec 12, 2007 at 09:35:09PM +0100, Göran Nilsson wrote:
> > > > Hi,
> > > > I have a problem getting my EX12350 Radicontroller to work under
> > > FreeBSD 6.2.
> > > > When i start the computer or rund a dmesg i can see that
> > > > "mass storage raid ..no driver attached"
> > > > For what i can see this card should be supported under FreeBSD 6.1,
> > > but
> > > > could it be soo that the support is missing in 6.2? Any tips?
> > > > Should i try to go for the 6.3 RC1. I really need this card up and
> > > running,
> > > > i run it as a RAID 6. I have tried this with just the
> generic kernel,
> > > > So the most should be in there?
> > > >
> > > > Ideas, is most appriciating, coz im kinda stuck.
> > > >
> > >
> > >
> > > What makes you think this card is supported by FreeBSD 6.1?
> > >
> > > As far as I can tell there is no driver for that card
> included with any
> > > FreeBSD release.  If it was supported the driver would have been
> > > included in
> > > GENERIC kernel, and if was supported in 6.1 it would have
> been in 6.2also.
> > >
> > >
> > > It is quite possible however that Promise provides their own FreeBSD
> > > driver
> > > for that card.  If that is the case you should ask Promise which
> > > version(s)
> > > of FreeBSD the driver supports and how to install it - or read their
> > > documentation where such information can likely be found.
> > >
> > >
> > >
> > >
> > > --
> > > <Insert your favourite quote here.>
> > > Erik Trulsson
> > > ertr1013 at student.uu.se
> > >
> >
> >
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
>
>
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.17.1/1183 - Release Date: 12/13/2007
9:15 AM