problem with network card in P35+ICH9

[Aryeh M. Friedman]

Playnet wrote:
>
>
>  I have a server based gigabyte MB with core2 quadro, P35+ICH9

>From the below let me guess it is in the MSI Neo familiy of Mobo's....
you will want the following patches for re:

http://people.freebsd.org/~yongari/re/re.HEAD.patch

If I am right about the Mobo you should also be getting mismatching
reports on your SATA drives as well the inablity to have SATA and PATA
together you will want the following patches to fix that:
http://www.flosoft-systems.com/patchs/ahci.diff
http://www.flosoft-systems.com/patchs/i82801-marvell.diff
>
>  FreeBSD 6.2
>
>   server# ifconfig -a re0:
> flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet 192.168.2.54
> netmask 0xffffff00 broadcast 192.168.2.255 ether 00:1a:4d:53:54:4d
> media: Ethernet autoselect (none) status: no carrier 
>  server# dmesg |grep re0 re0: <RealTek 8168B/8111B PCIe Gigabit
> Ethernet> port 0xc000-0xc0ff
> mem 0xf9000000-0xf9000fff irq 16 at device 0.0 on pci4 miibus0: <MII
> bus> on re0 re0: Ethernet address: 00:1a:4d:53:54:4d re0: [FAST] 
>  But these lan works good into windows with the same cable and
> connection. _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
>


-- 
Aryeh M. Friedman
FloSoft Systems
Developer, not business, friendly
http://www.flosoft-systems.com