Trying to move /usr
Vinny
vinny-mail-01+20070820usrmv at palaceofretention.ca
Mon Aug 20 20:19:25 PDT 2007
Michael S wrote:
> I reverted to the old /usr.
> What I had done:
> Initially I set up the newly installed drive (da2)
> to have only one partition (da2s1d) which I chose to
> be /user (note the e).
> I tarred /usr to a file in /user
> tar -cf /user/usr.tar /tar
>
> and extracted the file
> tar -xf usr.tar
> I had the whole structure of /usr underneath /user/usr
>
> And then
> cd usr
> mv * ..
>
> to have everything under /user
>
After thinking about that mv command, I have come to the
conclusion that /dev/da2s1d does not in fact contain
a /usr directory structure and if mounted will be
empty. Why?
Note /dev/ad8s1e is an empty partition (a new disk,
if you will on my system that I will in this demonstration).
Also, I'll use user and usrdemo as the names of the user and usr
directories that Michael is using, respectively. I don't want
to overwrite my own usr directory needlessly.
Observe:
Create a mount point and mount the disk
t# cd /
t# mkdir user
t# mount -t ufs /dev/ad8s1e /user
t# pwd
/user
t# mkdir -p usrdemo/path
Check our partition (there is a dot (.)after the df command,
look closely):
t# df .
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ad8s1e 507630 6 467014 0% /user
Create a file for no reason.
t# touch usrdemo/path/file.txt
t# cd /
t# ls -laR /user
total 6
drwxrwxrwt 3 root wheel 512 Aug 20 22:05 .
drwxr-xr-x 26 root wheel 1024 Aug 20 21:59 ..
drwxr-xr-x 3 root wheel 512 Aug 20 22:05 usrdemo
/user/usrdemo:
total 6
drwxr-xr-x 3 root wheel 512 Aug 20 22:05 .
drwxrwxrwt 3 root wheel 512 Aug 20 22:05 ..
drwxr-xr-x 2 root wheel 512 Aug 20 22:05 path
/user/usrdemo/path:
total 4
drwxr-xr-x 2 root wheel 512 Aug 20 22:05 .
drwxr-xr-x 3 root wheel 512 Aug 20 22:05 ..
-rw-r--r-- 1 root wheel 0 Aug 20 22:05 file.txt
t# cd /user
Let's look at what file system we're on again:
t# df .
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ad8s1e 507630 6 467014 0% /user
Still on the new drive.
Now that we're in the /user directory let us try, as Michael
says "to have everything under /user". Right idea, but mv is not
the tool in this case: The next command causes much trouble:
t# mv * ..
will in fact move the contents of /user to the parent directory
which is in fact /, the root of the file system.
There is nothing left in /user:
t# pwd
/user
t# ls -la
total 4
drwxrwxrwt 2 root wheel 512 Aug 20 22:06 .
drwxr-xr-x 27 root wheel 512 Aug 20 22:06 ..
If we change directory to the .. directory target (the same target as
the mv command) we'll see the usrdemo directory.
t# cd ..
t# ls
.cshrc compat lib proc usb
.profile dev libexec rescue usr
.snap dist media root usrdemo
COPYRIGHT dvdrom mnd sbin var
bin entropy mnt sdvd
boot etc user sys
cdrom home portable tmp
If we change to it and check our file system:
t# cd usrdemo/path/
t# ls
file.txt
t# df .
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ad4s1a 507630 99704 367316 21% /
We find it now sitting as a directory the / root partition!
In Michael's case it would be sitting on the old /usr
partition. Definitely not what we wanted.
So what has happened is that the mv * command with Michael's
usr directory actually overwrote the current /usr directory
with the contents of the tar archive. Seems like a no-op but
there could be symbolic link issues, i.e. /usr/home -> /home.
I hope that is semi-coherent.
What you probably want to do to replace a /usr partition is
something like this:
cd /
mkdir user
mount -t ufs /dev/da2s1d /user
cd /usr
pax -rw -pe . /user
pax is like tar. -rw means to read (r) from the source (.)
and write (w) to the destination (/user). -pe means to
preserve everything (permissions, ownership etc).
Having done that, you now have a duplicate usr directory
structure "under" /user i.e. /user/bin /user/lib and so on.
Now you can switch the fstab entries like you planned,
reboot, and you should have replaced /usr with the
new drive.
Hope this helps, although you may have some issues
in the future due to any unintended consequences
of the tar/mv command combination.
Vinny
More information about the freebsd-questions
mailing list