Boot fails on Dell 2950, any SCSI riser card

Dennis Glatting freebsd at penx.com
Thu Sep 21 11:39:57 PDT 2006



I have a Dell 2950 that fails to boot if I have a SCSI card in the PCIX riser 
card slots. I have tried this with a i386 kernel and an amd64 kernel. Under the 
i386 kernel the system will sometimes boot. Under the amd64 kernel, forget it. 
When boot failure occurs I must cycle power to get the machine back.

What happens is the system enters its boot sequence and parses through the 
devices, then halts the boot process typically without an error message. Under 
the i386 kernel I sometimes got an error message about interrupts being 
disabled but I didn't preserve those messages.

I have tried booting with several different Adaptec cards and a LSI Logic 
Ultra320 SCSI card. I have enclosed the boot output of a failed boot with an 
Adaptec card below followed by a failed boot with the LSI Logic card.

I noticed the system will boot if I remove the ahc device from the kernel for 
against the Adaptec cards. I have removed various peices of the kernel in the 
hope there is a conflict but the problem seems to be related to the riser card. 
I have used the same Adaptec cards in "normal" PCs under the i386 kernels and 
they worked without trouble.

Help is appreciated.



This is a failed boot against an Adaptec card.



boot: -Dv kernel
Consoles: internal video/keyboard  serial port BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS drive D: is disk2
BIOS 640kB/2095776kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(root at Elmer.dco.penx.com, Wed Sep 20 03:00:51 MDT 2006)
Loading /boot/defaults/loader.conf boot/kernel/kernel text=0x610808 
data=0xd6bb8+0x6c988 syms=[0x8+0x98bc8+0x8+0x7ffac]
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=01 base=0000000000100000 len=000000007fea8000
SMAP type=03 base=000000007ffa8000 len=000000000000fc00
SMAP type=02 base=000000007ffb7c00 len=0000000000048400
SMAP type=02 base=00000000e0000000 len=0000000010000000
SMAP type=02 base=00000000fe000000 len=0000000002000000
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
FreeBSD 6.2-PRERELEASE #7: Wed Sep 20 17:34:53 MDT 2006
     root at Elmer:/usr/src/sys/amd64/compile/ELMER
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a6e000.
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <DELL   PE_SC3  >
Calibrating clock(s) ... i8254 clock: 1193160 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2992523346 Hz
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.52-MHz K8-class CPU)
   Origin = "GenuineIntel"  Id = 0xf64  Stepping = 4
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 2
   Logical CPUs per core: 2
real memory  = 2147123200 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000b6b000 - 0x000000007c35afff, 2071920640 bytes (505840 pages)
avail memory = 2061656064 (1966 MB)
INTR: Adding local APIC 2 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  2
  cpu3 (AP): APIC ID:  3
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 5, Interrupt 64 at 0xfec81000
ioapic1: Changing APIC ID to 5
ioapic1: WARNING: intbase 64 != expected base 24
ioapic1: intpin 0 -> PCI IRQ 64 (level, low)
ioapic1: intpin 1 -> PCI IRQ 65 (level, low)
ioapic1: intpin 2 -> PCI IRQ 66 (level, low)
ioapic1: intpin 3 -> PCI IRQ 67 (level, low)
ioapic1: intpin 4 -> PCI IRQ 68 (level, low)
ioapic1: intpin 5 -> PCI IRQ 69 (level, low)
ioapic1: intpin 6 -> PCI IRQ 70 (level, low)
ioapic1: intpin 7 -> PCI IRQ 71 (level, low)
ioapic1: intpin 8 -> PCI IRQ 72 (level, low)
ioapic1: intpin 9 -> PCI IRQ 73 (level, low)
ioapic1: intpin 10 -> PCI IRQ 74 (level, low)
ioapic1: intpin 11 -> PCI IRQ 75 (level, low)
ioapic1: intpin 12 -> PCI IRQ 76 (level, low)
ioapic1: intpin 13 -> PCI IRQ 77 (level, low)
ioapic1: intpin 14 -> PCI IRQ 78 (level, low)
ioapic1: intpin 15 -> PCI IRQ 79 (level, low)
ioapic1: intpin 16 -> PCI IRQ 80 (level, low)
ioapic1: intpin 17 -> PCI IRQ 81 (level, low)
ioapic1: intpin 18 -> PCI IRQ 82 (level, low)
ioapic1: intpin 19 -> PCI IRQ 83 (level, low)
ioapic1: intpin 20 -> PCI IRQ 84 (level, low)
ioapic1: intpin 21 -> PCI IRQ 85 (level, low)
ioapic1: intpin 22 -> PCI IRQ 86 (level, low)
ioapic1: intpin 23 -> PCI IRQ 87 (level, low)
MADT: Found IO APIC ID 6, Interrupt 160 at 0xfec84000
ioapic2: Changing APIC ID to 6
ioapic2: WARNING: intbase 160 != expected base 88
ioapic2: intpin 0 -> PCI IRQ 160 (level, low)
ioapic2: intpin 1 -> PCI IRQ 161 (level, low)
ioapic2: intpin 2 -> PCI IRQ 162 (level, low)
ioapic2: intpin 3 -> PCI IRQ 163 (level, low)
ioapic2: intpin 4 -> PCI IRQ 164 (level, low)
ioapic2: intpin 5 -> PCI IRQ 165 (level, low)
ioapic2: intpin 6 -> PCI IRQ 166 (level, low)
ioapic2: intpin 7 -> PCI IRQ 167 (level, low)
ioapic2: intpin 8 -> PCI IRQ 168 (level, low)
ioapic2: intpin 9 -> PCI IRQ 169 (level, low)
ioapic2: intpin 10 -> PCI IRQ 170 (level, low)
ioapic2: intpin 11 -> PCI IRQ 171 (level, low)
ioapic2: intpin 12 -> PCI IRQ 172 (level, low)
ioapic2: intpin 13 -> PCI IRQ 173 (level, low)
ioapic2: intpin 14 -> PCI IRQ 174 (level, low)
ioapic2: intpin 15 -> PCI IRQ 175 (level, low)
ioapic2: intpin 16 -> PCI IRQ 176 (level, low)
ioapic2: intpin 17 -> PCI IRQ 177 (level, low)
ioapic2: intpin 18 -> PCI IRQ 178 (level, low)
ioapic2: intpin 19 -> PCI IRQ 179 (level, low)
ioapic2: intpin 20 -> PCI IRQ 180 (level, low)
ioapic2: intpin 21 -> PCI IRQ 181 (level, low)
ioapic2: intpin 22 -> PCI IRQ 182 (level, low)
ioapic2: intpin 23 -> PCI IRQ 183 (level, low)
MADT: Found IO APIC ID 7, Interrupt 224 at 0xfec84800
ioapic3: Changing APIC ID to 7
ioapic3: WARNING: intbase 224 != expected base 184
ioapic3: intpin 0 -> PCI IRQ 224 (level, low)
ioapic3: intpin 1 -> PCI IRQ 225 (level, low)
ioapic3: intpin 2 -> PCI IRQ 226 (level, low)
ioapic3: intpin 3 -> PCI IRQ 227 (level, low)
ioapic3: intpin 4 -> PCI IRQ 228 (level, low)
ioapic3: intpin 5 -> PCI IRQ 229 (level, low)
ioapic3: intpin 6 -> PCI IRQ 230 (level, low)
ioapic3: intpin 7 -> PCI IRQ 231 (level, low)
ioapic3: intpin 8 -> PCI IRQ 232 (level, low)
ioapic3: intpin 9 -> PCI IRQ 233 (level, low)
ioapic3: intpin 10 -> PCI IRQ 234 (level, low)
ioapic3: intpin 11 -> PCI IRQ 235 (level, low)
ioapic3: intpin 12 -> PCI IRQ 236 (level, low)
ioapic3: intpin 13 -> PCI IRQ 237 (level, low)
ioapic3: intpin 14 -> PCI IRQ 238 (level, low)
ioapic3: intpin 15 -> PCI IRQ 239 (level, low)
ioapic3: intpin 16 -> PCI IRQ 240 (level, low)
ioapic3: intpin 17 -> PCI IRQ 241 (level, low)
ioapic3: intpin 18 -> PCI IRQ 242 (level, low)
ioapic3: intpin 19 -> PCI IRQ 243 (level, low)
ioapic3: intpin 20 -> PCI IRQ 244 (level, low)
ioapic3: intpin 21 -> PCI IRQ 245 (level, low)
ioapic3: intpin 22 -> PCI IRQ 246 (level, low)
ioapic3: intpin 23 -> PCI IRQ 247 (level, low)
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 5
MADT: Ignoring local NMI routed to ACPI CPU 6
MADT: Ignoring local NMI routed to ACPI CPU 7
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
ioapic2 <Version 2.0> irqs 160-183 on motherboard
ioapic3 <Version 2.0> irqs 224-247 on motherboard
cpu0 BSP:
      ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd0 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Sep 20 2006 17:32:55)
acpi0: <DELL PE_SC3> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80126814
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25c08086)
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 16 func 1
AcpiOsDerivePciId: bus 0 dev 16 func 0
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  3 4 5 6 7 10 11 12
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  3 4 5 6 7 10 11 12
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  3 4 5 6 7 10 11 12
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  3 4 5 6 7 10 11 12
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0    5   N     0  3 4 5 6 7 10 11 12
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0    5   N     0  3 4 5 6 7 10 11 12
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0    6   N     0  3 4 5 6 7 10 11 12
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0    6   N     0  3 4 5 6 7 10 11 12
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  3 4 5 6 7 10 11 12
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  3 4 5 6 7 10 11 12
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  3 4 5 6 7 10 11 12
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  3 4 5 6 7 10 11 12
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0    6   N     0  3 4 5 6 7 10 11 12
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0    6   N     0  3 4 5 6 7 10 11 12
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x25c0, revid=0x12
 	bus=0, slot=0, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e2, revid=0x12
 	bus=0, slot=2, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x25e3, revid=0x12
 	bus=0, slot=3, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x25f8, revid=0x12
 	bus=0, slot=4, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x25e5, revid=0x12
 	bus=0, slot=5, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f9, revid=0x12
 	bus=0, slot=6, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x25e7, revid=0x12
 	bus=0, slot=7, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0x12
 	bus=0, slot=16, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0x12
 	bus=0, slot=16, func=1
 	class=06-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0x12
 	bus=0, slot=16, func=2
 	class=06-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f1, revid=0x12
 	bus=0, slot=17, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f3, revid=0x12
 	bus=0, slot=19, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f5, revid=0x12
 	bus=0, slot=21, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f6, revid=0x12
 	bus=0, slot=22, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2690, revid=0x09
 	bus=0, slot=28, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x2688, revid=0x09
 	bus=0, slot=29, func=0
 	class=0c-03-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	map[20]: type 4, range 32, base 0000cce0, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x2689, revid=0x09
 	bus=0, slot=29, func=1
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=10
 	map[20]: type 4, range 32, base 0000ccc0, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 20
found->	vendor=0x8086, dev=0x268a, revid=0x09
 	bus=0, slot=29, func=2
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=11
 	map[20]: type 4, range 32, base 0000cca0, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 21
found->	vendor=0x8086, dev=0x268c, revid=0x09
 	bus=0, slot=29, func=7
 	class=0c-03-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	powerspec 2  supports D0 D3  current D0
 	map[10]: type 1, range 32, base fc900400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x244e, revid=0xd9
 	bus=0, slot=30, func=0
 	class=06-04-01, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2670, revid=0x09
 	bus=0, slot=31, func=0
 	class=06-01-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x269e, revid=0x09
 	bus=0, slot=31, func=1
 	class=01-01-8a, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
 	map[20]: type 4, range 32, base 0000fc00, size  4, enabled
found->	vendor=0x8086, dev=0x2680, revid=0x09
 	bus=0, slot=31, func=2
 	class=01-01-8f, hdrtype=0x00, mfdev=0
 	cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=6
 	powerspec 2  supports D0 D3  current D0
 	map[10]: type 4, range 32, base 0000cc98, size  3, enabled
 	map[14]: type 4, range 32, base 0000cc90, size  2, enabled
 	map[18]: type 4, range 32, base 0000cc80, size  3, enabled
 	map[1c]: type 4, range 32, base 0000cc78, size  2, enabled
 	map[20]: type 4, range 32, base 0000cc60, size  4, enabled
 	map[24]: type 1, range 32, base fc900000, size 10, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 23
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1:   secondary bus     6
pcib1:   subordinate bus   11
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf2000000-0xf7ffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib1
pci6: physical bus=6
found->	vendor=0x8086, dev=0x3500, revid=0x01
 	bus=6, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x350c, revid=0x01
 	bus=6, slot=0, func=3
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pcib2:   secondary bus     7
pcib2:   subordinate bus   10
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xf4000000-0xf7ffffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci7: <ACPI PCI bus> on pcib2
pci7: physical bus=7
found->	vendor=0x8086, dev=0x3510, revid=0x01
 	bus=7, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x3514, revid=0x01
 	bus=7, slot=1, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib3:   secondary bus     8
pcib3:   subordinate bus   9
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xf4000000-0xf7ffffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pci8: <ACPI PCI bus> on pcib3
pci8: physical bus=8
found->	vendor=0x1166, dev=0x0103, revid=0xc2
 	bus=8, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pcib4:   secondary bus     9
pcib4:   subordinate bus   9
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xf4000000-0xf7ffffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pci9: <PCI bus> on pcib4
pci9: physical bus=9
found->	vendor=0x14e4, dev=0x164c, revid=0x11
 	bus=9, slot=0, func=0
 	class=02-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type 1, range 64, base f4000000, size 25, enabled
pcib4: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib3: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib2: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib1: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib3: matched entry for 8.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: slot 0 INTA is routed to irq 16
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf4000000
bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bce0: bpf attached
bce0: Ethernet address: 00:13:72:60:ac:52
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
bce0: [MPSAFE]
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pcib5:   secondary bus     10
pcib5:   subordinate bus   10
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0xfff00000-0xfffff
pcib5:   prefetched decode 0xfff00000-0xfffff
pci10: <ACPI PCI bus> on pcib5
pci10: physical bus=10
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pcib6:   secondary bus     11
pcib6:   subordinate bus   11
pcib6:   I/O decode        0xf000-0xfff
pcib6:   memory decode     0xfff00000-0xfffff
pcib6:   prefetched decode 0xfff00000-0xfffff
pci11: <PCI bus> on pcib6
pci11: physical bus=11
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib7:   secondary bus     1
pcib7:   subordinate bus   3
pcib7:   I/O decode        0xf000-0xfff
pcib7:   memory decode     0xfc600000-0xfc8fffff
pcib7:   prefetched decode 0xd8000000-0xd80fffff
pci1: <ACPI PCI bus> on pcib7
pci1: physical bus=1
found->	vendor=0x8086, dev=0x0370, revid=0x00
 	bus=1, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x0372, revid=0x00
 	bus=1, slot=0, func=2
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib8:   secondary bus     2
pcib8:   subordinate bus   2
pcib8:   I/O decode        0xf000-0xfff
pcib8:   memory decode     0xfc700000-0xfc8fffff
pcib8:   prefetched decode 0xd8000000-0xd80fffff
pci2: <ACPI PCI bus> on pcib8
pci2: physical bus=2
found->	vendor=0x1028, dev=0x0015, revid=0x00
 	bus=2, slot=14, func=0
 	class=01-04-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x01d6, statreg=0x0230, cachelnsz=16 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=5
 	powerspec 2  supports D0 D1 D3  current D0
 	MSI supports 2 messages, 64 bit
 	map[10]: type 3, range 32, base d80f0000, size 16, enabled
pcib8: (null) requested memory range 0xd80f0000-0xd80fffff: good
pcib7: (null) requested memory range 0xd80f0000-0xd80fffff: good
 	map[18]: type 1, range 32, base fc7e0000, size 17, enabled
pcib8: (null) requested memory range 0xfc7e0000-0xfc7fffff: good
pcib7: (null) requested memory range 0xfc7e0000-0xfc7fffff: good
pcib8: matched entry for 2.14.INTA
pcib8: slot 14 INTA hardwired to IRQ 78
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc7e0000-0xfc7fffff irq 78 at 
device 14.0 on pci2
mfi0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd80f0000
ioapic1: routing intpin 14 (PCI IRQ 78) to vector 50
mfi0: [MPSAFE]
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pcib9:   secondary bus     3
pcib9:   subordinate bus   3
pcib9:   I/O decode        0xf000-0xfff
pcib9:   memory decode     0xfff00000-0xfffff
pcib9:   prefetched decode 0xfff00000-0xfffff
pci3: <PCI bus> on pcib9
pci3: physical bus=3
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib10:   secondary bus     12
pcib10:   subordinate bus   12
pcib10:   I/O decode        0xf000-0xfff
pcib10:   memory decode     0xfff00000-0xfffff
pcib10:   prefetched decode 0xfff00000-0xfffff
pci12: <ACPI PCI bus> on pcib10
pci12: physical bus=12
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pcib11:   secondary bus     13
pcib11:   subordinate bus   13
pcib11:   I/O decode        0xf000-0xfff
pcib11:   memory decode     0xfff00000-0xfffff
pcib11:   prefetched decode 0xfff00000-0xfffff
pci13: <PCI bus> on pcib11
pci13: physical bus=13
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib12:   secondary bus     14
pcib12:   subordinate bus   16
pcib12:   I/O decode        0xe000-0xefff
pcib12:   memory decode     0xfc300000-0xfc5fffff
pcib12:   prefetched decode 0xfff00000-0xfffff
pci14: <ACPI PCI bus> on pcib12
pci14: physical bus=14
found->	vendor=0x8086, dev=0x0329, revid=0x09
 	bus=14, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x032a, revid=0x09
 	bus=14, slot=0, func=2
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci14
pcib13:   secondary bus     15
pcib13:   subordinate bus   15
pcib13:   I/O decode        0xf000-0xfff
pcib13:   memory decode     0xfff00000-0xfffff
pcib13:   prefetched decode 0xfff00000-0xfffff
pci15: <ACPI PCI bus> on pcib13
pci15: physical bus=15
pcib14: <ACPI PCI-PCI bridge> at device 0.2 on pci14
pcib14:   secondary bus     16
pcib14:   subordinate bus   16
pcib14:   I/O decode        0xe000-0xefff
pcib14:   memory decode     0xfc400000-0xfc5fffff
pcib14:   prefetched decode 0xfff00000-0xfffff
pci16: <ACPI PCI bus> on pcib14
pci16: physical bus=16
found->	vendor=0x9005, dev=0x00c0, revid=0x01
 	bus=16, slot=4, func=0
 	class=01-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
 	intpin=a, irq=11
 	powerspec 2  supports D0 D3  current D0
 	map[10]: type 4, range 32, base 0000ec00, size  8, enabled
pcib14: (null) requested I/O range 0xec00-0xecff: in range
pcib12: (null) requested I/O range 0xec00-0xecff: in range
 	map[14]: type 1, range 64, base fc4ff000, size 12, enabled
pcib14: (null) requested memory range 0xfc4ff000-0xfc4fffff: good
pcib12: (null) requested memory range 0xfc4ff000-0xfc4fffff: good
pcib14: matched entry for 16.4.INTA
pcib14: slot 4 INTA hardwired to IRQ 224
found->	vendor=0x9005, dev=0x00c0, revid=0x01
 	bus=16, slot=4, func=1
 	class=01-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
 	intpin=b, irq=10
 	powerspec 2  supports D0 D3  current D0
 	map[10]: type 4, range 32, base 0000e800, size  8, enabled
pcib14: (null) requested I/O range 0xe800-0xe8ff: in range
pcib12: (null) requested I/O range 0xe800-0xe8ff: in range
 	map[14]: type 1, range 64, base fc4fe000, size 12, enabled
pcib14: (null) requested memory range 0xfc4fe000-0xfc4fefff: good
pcib12: (null) requested memory range 0xfc4fe000-0xfc4fefff: good
pcib14: matched entry for 16.4.INTB
pcib14: slot 4 INTB hardwired to IRQ 225
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xec00-0xecff mem 
0xfc4ff000-0xfc4fffff irq 224 at device 4.0 on pci16
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00
ahc0: Enabling 39Bit Addressing
ahc0: Reading SEEPROM...done.
ahc0: Manual SE Termination
ahc0: BIOS eeprom is present
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 433 instructions downloaded
ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x29485560
ioapic3: routing intpin 0 (PCI IRQ 224) to vector 51
ahc0: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 
0xfc4fe000-0xfc4fefff irq 225 at device 4.1 on pci16
ahc1: Defaulting to MEMIO off
ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
ahc1: Enabling 39Bit Addressing
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 433 instructions downloaded
ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x29485560
ioapic3: routing intpin 1 (PCI IRQ 225) to vector 52
ahc1: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib15: <PCI-PCI bridge> at device 7.0 on pci0
pcib15:   secondary bus     17
pcib15:   subordinate bus   17
pcib15:   I/O decode        0xf000-0xfff
pcib15:   memory decode     0xfff00000-0xfffff
pcib15:   prefetched decode 0xfff00000-0xfffff
pci17: <PCI bus> on pcib15
pci17: physical bus=17
pcib16: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib16:   secondary bus     4
pcib16:   subordinate bus   5
pcib16:   I/O decode        0xf000-0xfff
pcib16:   memory decode     0xf8000000-0xfbffffff
pcib16:   prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib16
pci4: physical bus=4
found->	vendor=0x1166, dev=0x0103, revid=0xc2
 	bus=4, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib17: <PCI-PCI bridge> at device 0.0 on pci4
pcib17:   secondary bus     5
pcib17:   subordinate bus   5
pcib17:   I/O decode        0xf000-0xfff
pcib17:   memory decode     0xf8000000-0xfbffffff
pcib17:   prefetched decode 0xfff00000-0xfffff
pci5: <PCI bus> on pcib17
pci5: physical bus=5
found->	vendor=0x14e4, dev=0x164c, revid=0x11
 	bus=5, slot=0, func=0
 	class=02-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type 1, range 64, base f8000000, size 25, enabled
pcib17: (null) requested memory range 0xf8000000-0xf9ffffff: good
pcib16: (null) requested memory range 0xf8000000-0xf9ffffff: good
pcib16: matched entry for 4.0.INTA
pcib16: slot 0 INTA hardwired to IRQ 16
pcib17: slot 0 INTA is routed to irq 16
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf8000000
bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bce1: bpf attached
bce1: Ethernet address: 00:13:72:60:ac:50
bce1: [MPSAFE]
uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at device 29.0 
on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcce0
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at device 29.1 
on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xccc0
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at device 29.2 
on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcca0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900400-0xfc9007ff irq 21 at 
device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfc900400
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
ukbd0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL  INC. DRAC5 VIRTUAL  MEDIA, rev 2.00/0.00, addr 4
umass0:2:0:-1: Attached to scbus2
umass1: DELL  INC. DRAC5 VIRTUAL  MEDIA, rev 2.00/0.00, addr 4
umass1:3:1:-1: Attached to scbus3
uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 5
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
ukbd1: Dell Dell USB Keyboard, rev 1.10/3.01, addr 6, iclass 3/1
kbd2 at ukbd1
kbd2: ukbd1, generic (0), config:0x0, flags:0x3d0000
pcib18: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib18:   secondary bus     18
pcib18:   subordinate bus   18
pcib18:   I/O decode        0xd000-0xdfff
pcib18:   memory decode     0xfc100000-0xfc2fffff
pcib18:   prefetched decode 0xd0000000-0xd7ffffff
pcib18:   Subtractively decoded bridge.
pci18: <ACPI PCI bus> on pcib18
pci18: physical bus=18
found->	vendor=0x1002, dev=0x515e, revid=0x02
 	bus=18, slot=13, func=0
 	class=03-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=6
 	powerspec 2  supports D0 D1 D2 D3  current D0
 	map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib18: (null) requested memory range 0xd0000000-0xd7ffffff: good
 	map[14]: type 4, range 32, base 0000dc00, size  8, enabled
pcib18: (null) requested I/O range 0xdc00-0xdcff: in range
 	map[18]: type 1, range 32, base fc1f0000, size 16, enabled
pcib18: (null) requested memory range 0xfc1f0000-0xfc1fffff: good
pcib18: matched entry for 18.13.INTA
pcib18: slot 13 INTA hardwired to IRQ 19
pci18: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
atapci1: <Intel 63XXESB2 SATA300 controller> port 
0xcc98-0xcc9f,0xcc90-0xcc93,0xcc80-0xcc87,0xcc78-0xcc7b,0xcc60-0xcc6f mem 
0xfc900000-0xfc9003ff irq 23 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc60
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 57
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc98
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcc90
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc80
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcc78
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: irq maps: 0x4c61 0x4c71 0x4c61 0x4c61
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio1: irq maps: 0x4c61 0x4c69 0x4c61 0x4c61
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 59
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132662 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 83125179 hz
Timecounter "TSC" frequency 2992523346 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, 
default to accept, logging unlimited
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 63XXESB2 chip
acd0: setting UDMA33 on 63XXESB2 chip
acd0: <TEAC CD-ROM CD-224E-N/3.AB> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 2 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
mfi0: 4265 - PCI 0x041028 0x0415 0x041028 0x041f03: Firmware initialization 
started (PCI ID 0015/1028/1f03/1028)
mfi0: 4266 - Type 18: Firmware version 1.00.01-0088
mfi0: 4267 - Battery Present
mfi0: 4268 - PD 08(e1/s255) event: Enclosure (SES) discovered on PD 08(e1/s255)
mfi0: 4269 - PD 08(e1/s255) event: Inserted: PD 08(e1/s255)
mfi0: 4270 - Type 29: Inserted: PD 08(e1/s255) Info: enclPd=08, scsiType=d, 
portMap=00, sasAddr=5001302062530c00,0000000000000000
mfi0: 4271 - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 4272 - Type 29: Inserted: PD 00(e1/s0) Info: enclPd=08, scsiType=0, 
portMap=01, sasAddr=500000e011eeda62,0000000000000000
mfi0: 4273 - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
mfi0: 4274 - Type 29: Inserted: PD 01(e1/s1) Info: enclPd=08, scsiType=0, 
portMap=02, sasAddr=500000e011eecd12,0000000000000000
mfi0: 4275 - PD 02(e1/s2) event: Inserted: PD 02(e1/s2)
mfi0: 4276 - Type 29: Inserted: PD 02(e1/s2) Info: enclPd=08, scsiType=0, 
portMap=04, sasAddr=500000e0120fe632,0000000000000000
mfid0: <MFI Logical Disk> on mfi0
mfid0: 34176MB (69992448 sectors) RAID
mfi0: 4277 - PD 03(e1/s3) event: Inserted: PD 03(e1/s3)
mfi0: 4278 - Type 29: Inserted: PD 03(e1/s3) Info: enclPd=08, scsiType=0, 
portMap=08, sasAddr=500000e0120fe412,0000000000000000
mfi0: 4279 - PD 04(e1/s4) event: Inserted: PD 04(e1/s4)
mfi0: 4280 - Type 29: Inserted: PD 04(e1/s4) Info: enclPd=08, scsiType=0, 
portMap=10, sasAddr=500000e0120fdee2,0000000000000000
mfid1: <MFI Logical Disk> on mfi0
mfid1: 138752MB (284164096 sectors) RAID
mfi0: 4281 - PD 05(e1/s5) event: Inserted: PD 05(e1/s5)
mfi0: 4282 - Type 29: Inserted: PD 05(e1/s5) Info: enclPd=08, scsiType=0, 
portMap=20, sasAddr=500000e0120f5db2,0000000000000000
mfi0: 4283 - Type 22: Global Hot Spare created on PD 05(e1/s5) (global,rev)
mfi0: 4284 - PD 05(e1/s5) state prior 0 new 2: State change on PD 05(e1/s5) 
from UNCONFIGURED_GOOD(0) to HOT SPARE(2)
mfi0: 4285 - Adapter ticks 212091608 elapsed 59s: Time established as 09/20/06 
18:20:08; (59 seconds since power on)
mfi0: 4286 - PCI 0x041028 0x0415 0x041028 0x041f03: Firmware initialization 
started (PCI ID 0015/1028/1f03/1028)
mfi0: 4287 - Type 18: Firmware version 1.00.01-0088
mfi0: 4288 - Battery Present
mfi0: 4289 - PD 08(e1/s255) event: Enclosure (SES) discovered on PD 08(e1/s255)
mfi0: 4290 - PD 08(e1/s255) event: Inserted: PD 08(e1/s255)
mfi0: 4291 - Type 29: Inserted: PD 08(e1/s255) Info: enclPd=08, scsiType=d, 
portMap=00, sasAddr=5001302062530c00,0000000000000000
mfi0: 4292 - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 4293 - Type 29: Inserted: PD 00(e1/s0) Info: enclPd=08, scsiType=0, 
portMap=01, sasAddr=500000e011eeda62,0000000000000000
mfi0: 4294 - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
Gmfi0: 4295 - Type 29: Inserted: PD 01(e1/s1) Info: enclPd=08, scsiType=0, 
portMap=02, sasAddr=500000e011eecd12,0000000000000000
Emfi0: 4296 - PD 02(e1/s2) event: Inserted: PD 02(e1/s2)
Omfi0: 4297 - Type 29: Inserted: PD 02(e1/s2) Info: enclPd=08, scsiType=0, 
portMap=04, sasAddr=500000e0120fe632,0000000000000000
Mmfi0: 4298 - PD 03(e1/s3) event: Inserted: PD 03(e1/s3)
:mfi0: 4299 - Type 29: Inserted: PD 03(e1/s3) Info: enclPd=08, scsiType=0, 
portMap=08, sasAddr=500000e0120fe412,0000000000000000
  mfi0: 4300 - PD 04(e1/s4) event: Inserted: PD 04(e1/s4)
nmfi0: 4301 - Type 29: Inserted: PD 04(e1/s4) Info: enclPd=08, scsiType=0, 
portMap=10, sasAddr=500000e0120fdee2,0000000000000000
emfi0: 4302 - PD 05(e1/s5) event: Inserted: PD 05(e1/s5)
wmfi0: 4303 - Type 29: Inserted: PD 05(e1/s5) Info: enclPd=08, scsiType=0, 
portMap=20, sasAddr=500000e0120f5db2,0000000000000000
  mfi0: 4304 - Type 22: Global Hot Spare created on PD 05(e1/s5) (global,rev)
mfi0: 4305 - PD 05(e1/s5) state prior 0 new 2: State change on PD 05(e1/s5) 
from UNCONFIGURED_GOOD(0) to HOT SPARE(2)
mfi0: 4306 - Adapter ticks 212091734 elapsed 60s: Time established as 09/20/06 
18:22:14; (60 seconds since power on)
mf~




This is a boot sequence against the LSI Logic card.



FreeBSD/i386 bootstrap loader, Revision 1.1
(root at Elmer.dco.penx.com, Wed Sep 20 03:00:51 MDT 2006)
Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x610808 
data=0xd6bb8+0x6c988 syms=[0x8+0x98bc8+0x8+0x7ffac]
SMAP type=01 base=0000000000100000 len=000000007fea8000
SMAP type=03 base=000000007ffa8000 len=000000000000fc00
SMAP type=02 base=000000007ffb7c00 len=0000000000048400
SMAP type=02 base=00000000e0000000 len=0000000010000000
SMAP type=02 base=00000000fe000000 len=0000000002000000
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
FreeBSD 6.2-PRERELEASE #7: Wed Sep 20 17:34:53 MDT 2006
     root at Elmer:/usr/src/sys/amd64/compile/ELMER
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a6e000.
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <DELL   PE_SC3  >
Calibrating clock(s) ... i8254 clock: 1193165 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2992518432 Hz
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.52-MHz K8-class CPU)
   Origin = "GenuineIntel"  Id = 0xf64  Stepping = 4
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 2
   Logical CPUs per core: 2
real memory  = 2147123200 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000b6b000 - 0x000000007c35afff, 2071920640 bytes (505840 pages)
avail memory = 2061656064 (1966 MB)
INTR: Adding local APIC 2 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  2
  cpu3 (AP): APIC ID:  3
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 5, Interrupt 64 at 0xfec81000
ioapic1: Changing APIC ID to 5
ioapic1: WARNING: intbase 64 != expected base 24
ioapic1: intpin 0 -> PCI IRQ 64 (level, low)
ioapic1: intpin 1 -> PCI IRQ 65 (level, low)
ioapic1: intpin 2 -> PCI IRQ 66 (level, low)
ioapic1: intpin 3 -> PCI IRQ 67 (level, low)
ioapic1: intpin 4 -> PCI IRQ 68 (level, low)
ioapic1: intpin 5 -> PCI IRQ 69 (level, low)
ioapic1: intpin 6 -> PCI IRQ 70 (level, low)
ioapic1: intpin 7 -> PCI IRQ 71 (level, low)
ioapic1: intpin 8 -> PCI IRQ 72 (level, low)
ioapic1: intpin 9 -> PCI IRQ 73 (level, low)
ioapic1: intpin 10 -> PCI IRQ 74 (level, low)
ioapic1: intpin 11 -> PCI IRQ 75 (level, low)
ioapic1: intpin 12 -> PCI IRQ 76 (level, low)
ioapic1: intpin 13 -> PCI IRQ 77 (level, low)
ioapic1: intpin 14 -> PCI IRQ 78 (level, low)
ioapic1: intpin 15 -> PCI IRQ 79 (level, low)
ioapic1: intpin 16 -> PCI IRQ 80 (level, low)
ioapic1: intpin 17 -> PCI IRQ 81 (level, low)
ioapic1: intpin 18 -> PCI IRQ 82 (level, low)
ioapic1: intpin 19 -> PCI IRQ 83 (level, low)
ioapic1: intpin 20 -> PCI IRQ 84 (level, low)
ioapic1: intpin 21 -> PCI IRQ 85 (level, low)
ioapic1: intpin 22 -> PCI IRQ 86 (level, low)
ioapic1: intpin 23 -> PCI IRQ 87 (level, low)
MADT: Found IO APIC ID 6, Interrupt 160 at 0xfec84000
ioapic2: Changing APIC ID to 6
ioapic2: WARNING: intbase 160 != expected base 88
ioapic2: intpin 0 -> PCI IRQ 160 (level, low)
ioapic2: intpin 1 -> PCI IRQ 161 (level, low)
ioapic2: intpin 2 -> PCI IRQ 162 (level, low)
ioapic2: intpin 3 -> PCI IRQ 163 (level, low)
ioapic2: intpin 4 -> PCI IRQ 164 (level, low)
ioapic2: intpin 5 -> PCI IRQ 165 (level, low)
ioapic2: intpin 6 -> PCI IRQ 166 (level, low)
ioapic2: intpin 7 -> PCI IRQ 167 (level, low)
ioapic2: intpin 8 -> PCI IRQ 168 (level, low)
ioapic2: intpin 9 -> PCI IRQ 169 (level, low)
ioapic2: intpin 10 -> PCI IRQ 170 (level, low)
ioapic2: intpin 11 -> PCI IRQ 171 (level, low)
ioapic2: intpin 12 -> PCI IRQ 172 (level, low)
ioapic2: intpin 13 -> PCI IRQ 173 (level, low)
ioapic2: intpin 14 -> PCI IRQ 174 (level, low)
ioapic2: intpin 15 -> PCI IRQ 175 (level, low)
ioapic2: intpin 16 -> PCI IRQ 176 (level, low)
ioapic2: intpin 17 -> PCI IRQ 177 (level, low)
ioapic2: intpin 18 -> PCI IRQ 178 (level, low)
ioapic2: intpin 19 -> PCI IRQ 179 (level, low)
ioapic2: intpin 20 -> PCI IRQ 180 (level, low)
ioapic2: intpin 21 -> PCI IRQ 181 (level, low)
ioapic2: intpin 22 -> PCI IRQ 182 (level, low)
ioapic2: intpin 23 -> PCI IRQ 183 (level, low)
MADT: Found IO APIC ID 7, Interrupt 224 at 0xfec84800
ioapic3: Changing APIC ID to 7
ioapic3: WARNING: intbase 224 != expected base 184
ioapic3: intpin 0 -> PCI IRQ 224 (level, low)
ioapic3: intpin 1 -> PCI IRQ 225 (level, low)
ioapic3: intpin 2 -> PCI IRQ 226 (level, low)
ioapic3: intpin 3 -> PCI IRQ 227 (level, low)
ioapic3: intpin 4 -> PCI IRQ 228 (level, low)
ioapic3: intpin 5 -> PCI IRQ 229 (level, low)
ioapic3: intpin 6 -> PCI IRQ 230 (level, low)
ioapic3: intpin 7 -> PCI IRQ 231 (level, low)
ioapic3: intpin 8 -> PCI IRQ 232 (level, low)
ioapic3: intpin 9 -> PCI IRQ 233 (level, low)
ioapic3: intpin 10 -> PCI IRQ 234 (level, low)
ioapic3: intpin 11 -> PCI IRQ 235 (level, low)
ioapic3: intpin 12 -> PCI IRQ 236 (level, low)
ioapic3: intpin 13 -> PCI IRQ 237 (level, low)
ioapic3: intpin 14 -> PCI IRQ 238 (level, low)
ioapic3: intpin 15 -> PCI IRQ 239 (level, low)
ioapic3: intpin 16 -> PCI IRQ 240 (level, low)
ioapic3: intpin 17 -> PCI IRQ 241 (level, low)
ioapic3: intpin 18 -> PCI IRQ 242 (level, low)
ioapic3: intpin 19 -> PCI IRQ 243 (level, low)
ioapic3: intpin 20 -> PCI IRQ 244 (level, low)
ioapic3: intpin 21 -> PCI IRQ 245 (level, low)
ioapic3: intpin 22 -> PCI IRQ 246 (level, low)
ioapic3: intpin 23 -> PCI IRQ 247 (level, low)
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 5
MADT: Ignoring local NMI routed to ACPI CPU 6
MADT: Ignoring local NMI routed to ACPI CPU 7
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
ioapic2 <Version 2.0> irqs 160-183 on motherboard
ioapic3 <Version 2.0> irqs 224-247 on motherboard
cpu0 BSP:
      ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd0 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Sep 20 2006 17:32:55)
acpi0: <DELL PE_SC3> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80126814
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25c08086)
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 16 func 1
AcpiOsDerivePciId: bus 0 dev 16 func 0
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  3 4 5 6 7 10 11 12
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  3 4 5 6 7 10 11 12
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0    5   N     0  3 4 5 6 7 10 11 12
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0    5   N     0  3 4 5 6 7 10 11 12
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  3 4 5 6 7 10 11 12
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  3 4 5 6 7 10 11 12
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  3 4 5 6 7 10 11 12
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  3 4 5 6 7 10 11 12
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  3 4 5 6 7 10 11 12
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  3 4 5 6 7 10 11 12
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
     0    6   N     0  3 4 5 6 7 10 11 12
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
     0    6   N     0  3 4 5 6 7 10 11 12
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  3 4 5 6 7 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x25c0, revid=0x12
 	bus=0, slot=0, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e2, revid=0x12
 	bus=0, slot=2, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x25e3, revid=0x12
 	bus=0, slot=3, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x25f8, revid=0x12
 	bus=0, slot=4, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x25e5, revid=0x12
 	bus=0, slot=5, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f9, revid=0x12
 	bus=0, slot=6, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x25e7, revid=0x12
 	bus=0, slot=7, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0x12
 	bus=0, slot=16, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0x12
 	bus=0, slot=16, func=1
 	class=06-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0x12
 	bus=0, slot=16, func=2
 	class=06-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f1, revid=0x12
 	bus=0, slot=17, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f3, revid=0x12
 	bus=0, slot=19, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f5, revid=0x12
 	bus=0, slot=21, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f6, revid=0x12
 	bus=0, slot=22, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2690, revid=0x09
 	bus=0, slot=28, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x2688, revid=0x09
 	bus=0, slot=29, func=0
 	class=0c-03-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	map[20]: type 4, range 32, base 0000cce0, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x2689, revid=0x09
 	bus=0, slot=29, func=1
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=10
 	map[20]: type 4, range 32, base 0000ccc0, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 20
found->	vendor=0x8086, dev=0x268a, revid=0x09
 	bus=0, slot=29, func=2
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=11
 	map[20]: type 4, range 32, base 0000cca0, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 21
found->	vendor=0x8086, dev=0x268c, revid=0x09
 	bus=0, slot=29, func=7
 	class=0c-03-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	powerspec 2  supports D0 D3  current D0
 	map[10]: type 1, range 32, base fc900400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x244e, revid=0xd9
 	bus=0, slot=30, func=0
 	class=06-04-01, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2670, revid=0x09
 	bus=0, slot=31, func=0
 	class=06-01-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x269e, revid=0x09
 	bus=0, slot=31, func=1
 	class=01-01-8a, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
 	map[20]: type 4, range 32, base 0000fc00, size  4, enabled
found->	vendor=0x8086, dev=0x2680, revid=0x09
 	bus=0, slot=31, func=2
 	class=01-01-8f, hdrtype=0x00, mfdev=0
 	cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=6
 	powerspec 2  supports D0 D3  current D0
 	map[10]: type 4, range 32, base 0000cc98, size  3, enabled
 	map[14]: type 4, range 32, base 0000cc90, size  2, enabled
 	map[18]: type 4, range 32, base 0000cc80, size  3, enabled
 	map[1c]: type 4, range 32, base 0000cc78, size  2, enabled
 	map[20]: type 4, range 32, base 0000cc60, size  4, enabled
 	map[24]: type 1, range 32, base fc900000, size 10, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 23
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1:   secondary bus     6
pcib1:   subordinate bus   11
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf2000000-0xf7ffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib1
pci6: physical bus=6
found->	vendor=0x8086, dev=0x3500, revid=0x01
 	bus=6, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x350c, revid=0x01
 	bus=6, slot=0, func=3
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pcib2:   secondary bus     7
pcib2:   subordinate bus   10
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xf4000000-0xf7ffffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci7: <ACPI PCI bus> on pcib2
pci7: physical bus=7
found->	vendor=0x8086, dev=0x3510, revid=0x01
 	bus=7, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
found->	vendor=0x8086, dev=0x3514, revid=0x01
 	bus=7, slot=1, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib3:   secondary bus     8
pcib3:   subordinate bus   9
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xf4000000-0xf7ffffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pci8: <ACPI PCI bus> on pcib3
pci8: physical bus=8
found->	vendor=0x1166, dev=0x0103, revid=0xc2
 	bus=8, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pcib4:   secondary bus     9
pcib4:   subordinate bus   9
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xf4000000-0xf7ffffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pci9: <PCI bus> on pcib4
pci9: physical bus=9
found->	vendor=0x14e4, dev=0x164c, revid=0x11
 	bus=9, slot=0, func=0
 	class=02-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type 1, range 64, base f4000000, size 25, enabled
pcib4: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib3: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib2: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib1: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib3: matched entry for 8.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: slot 0 INTA is routed to irq 16
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf4000000
bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bce0: bpf attached
bce0: Ethernet address: 00:13:72:60:ac:52
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
bce0: [MPSAFE]
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pcib5:   secondary bus     10
pcib5:   subordinate bus   10
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0xfff00000-0xfffff
pcib5:   prefetched decode 0xfff00000-0xfffff
pci10: <ACPI PCI bus> on pcib5
pci10: physical bus=10
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pcib6:   secondary bus     11
pcib6:   subordinate bus   11
pcib6:   I/O decode        0xf000-0xfff
pcib6:   memory decode     0xfff00000-0xfffff
pcib6:   prefetched decode 0xfff00000-0xfffff
pci11: <PCI bus> on pcib6
pci11: physical bus=11
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib7:   secondary bus     1
pcib7:   subordinate bus   3
pcib7:   I/O decode        0xf000-0xfff
pcib7:   memory decode     0xfc600000-0xfc8fffff
pcib7:   prefetched decode 0xd8000000-0xd80fffff
pci1: <ACPI PCI bus> on pcib7
pci1: physical bus=1
found->	vendor=0x8086, dev=0x0370, revid=0x00
 	bus=1, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x0372, revid=0x00
 	bus=1, slot=0, func=2
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib8:   secondary bus     2
pcib8:   subordinate bus   2
pcib8:   I/O decode        0xf000-0xfff
pcib8:   memory decode     0xfc700000-0xfc8fffff
pcib8:   prefetched decode 0xd8000000-0xd80fffff
pci2: <ACPI PCI bus> on pcib8
pci2: physical bus=2
found->	vendor=0x1028, dev=0x0015, revid=0x00
 	bus=2, slot=14, func=0
 	class=01-04-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x01d6, statreg=0x0230, cachelnsz=16 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=5
 	powerspec 2  supports D0 D1 D3  current D0
 	MSI supports 2 messages, 64 bit
 	map[10]: type 3, range 32, base d80f0000, size 16, enabled
pcib8: (null) requested memory range 0xd80f0000-0xd80fffff: good
pcib7: (null) requested memory range 0xd80f0000-0xd80fffff: good
 	map[18]: type 1, range 32, base fc7e0000, size 17, enabled
pcib8: (null) requested memory range 0xfc7e0000-0xfc7fffff: good
pcib7: (null) requested memory range 0xfc7e0000-0xfc7fffff: good
pcib8: matched entry for 2.14.INTA
pcib8: slot 14 INTA hardwired to IRQ 78
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc7e0000-0xfc7fffff irq 78 at 
device 14.0 on pci2
mfi0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd80f0000
ioapic1: routing intpin 14 (PCI IRQ 78) to vector 50
mfi0: [MPSAFE]
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pcib9:   secondary bus     3
pcib9:   subordinate bus   3
pcib9:   I/O decode        0xf000-0xfff
pcib9:   memory decode     0xfff00000-0xfffff
pcib9:   prefetched decode 0xfff00000-0xfffff
pci3: <PCI bus> on pcib9
pci3: physical bus=3
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib10:   secondary bus     12
pcib10:   subordinate bus   12
pcib10:   I/O decode        0xf000-0xfff
pcib10:   memory decode     0xfff00000-0xfffff
pcib10:   prefetched decode 0xfff00000-0xfffff
pci12: <ACPI PCI bus> on pcib10
pci12: physical bus=12
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pcib11:   secondary bus     13
pcib11:   subordinate bus   13
pcib11:   I/O decode        0xf000-0xfff
pcib11:   memory decode     0xfff00000-0xfffff
pcib11:   prefetched decode 0xfff00000-0xfffff
pci13: <PCI bus> on pcib11
pci13: physical bus=13
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib12:   secondary bus     14
pcib12:   subordinate bus   16
pcib12:   I/O decode        0xe000-0xefff
pcib12:   memory decode     0xfc300000-0xfc5fffff
pcib12:   prefetched decode 0xfff00000-0xfffff
pci14: <ACPI PCI bus> on pcib12
pci14: physical bus=14
found->	vendor=0x8086, dev=0x0329, revid=0x09
 	bus=14, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x032a, revid=0x09
 	bus=14, slot=0, func=2
 	class=06-04-00, hdrtype=0x01, mfdev=1
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci14
pcib13:   secondary bus     15
pcib13:   subordinate bus   15
pcib13:   I/O decode        0xf000-0xfff
pcib13:   memory decode     0xfff00000-0xfffff
pcib13:   prefetched decode 0xfff00000-0xfffff
pci15: <ACPI PCI bus> on pcib13
pci15: physical bus=15
pcib14: <ACPI PCI-PCI bridge> at device 0.2 on pci14
pcib14:   secondary bus     16
pcib14:   subordinate bus   16
pcib14:   I/O decode        0xe000-0xefff
pcib14:   memory decode     0xfc400000-0xfc5fffff
pcib14:   prefetched decode 0xfff00000-0xfffff
pci16: <ACPI PCI bus> on pcib14
pci16: physical bus=16
found->	vendor=0x1000, dev=0x0030, revid=0xc1
 	bus=16, slot=4, func=0
 	class=01-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
 	lattimer=0x48 (2160 ns), mingnt=0x10 (4000 ns), maxlat=0x06 (1500 ns)
 	intpin=a, irq=11
 	powerspec 2  supports D0 D1 D2 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type 4, range 32, base 0000ec00, size  8, enabled
pcib14: (null) requested I/O range 0xec00-0xecff: in range
pcib12: (null) requested I/O range 0xec00-0xecff: in range
 	map[14]: type 1, range 64, base fc4e0000, size 17, enabled
pcib14: (null) requested memory range 0xfc4e0000-0xfc4fffff: good
pcib12: (null) requested memory range 0xfc4e0000-0xfc4fffff: good
 	map[1c]: type 1, range 64, base fc4c0000, size 17, enabled
pcib14: (null) requested memory range 0xfc4c0000-0xfc4dffff: good
pcib12: (null) requested memory range 0xfc4c0000-0xfc4dffff: good
pcib14: matched entry for 16.4.INTA
pcib14: slot 4 INTA hardwired to IRQ 224
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem 
0xfc4e0000-0xfc4fffff,0xfc4c0000-0xfc4dffff irq 224 at device 4.0 on pci16
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00
mpt0: Reserved 0x20000 bytes for rid 0x14 type 3 at 0xfc4e0000
ioapic3: routing intpin 0 (PCI IRQ 224) to vector 51
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.12.0
pcib15: <PCI-PCI bridge> at device 7.0 on pci0
pcib15:   secondary bus     17
pcib15:   subordinate bus   17
pcib15:   I/O decode        0xf000-0xfff
pcib15:   memory decode     0xfff00000-0xfffff
pcib15:   prefetched decode 0xfff00000-0xfffff
pci17: <PCI bus> on pcib15
pci17: physical bus=17
pcib16: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib16:   secondary bus     4
pcib16:   subordinate bus   5
pcib16:   I/O decode        0xf000-0xfff
pcib16:   memory decode     0xf8000000-0xfbffffff
pcib16:   prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib16
pci4: physical bus=4
found->	vendor=0x1166, dev=0x0103, revid=0xc2
 	bus=4, slot=0, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib17: <PCI-PCI bridge> at device 0.0 on pci4
pcib17:   secondary bus     5
pcib17:   subordinate bus   5
pcib17:   I/O decode        0xf000-0xfff
pcib17:   memory decode     0xf8000000-0xfbffffff
pcib17:   prefetched decode 0xfff00000-0xfffff
pci5: <PCI bus> on pcib17
pci5: physical bus=5
found->	vendor=0x14e4, dev=0x164c, revid=0x11
 	bus=5, slot=0, func=0
 	class=02-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=11
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type 1, range 64, base f8000000, size 25, enabled
pcib17: (null) requested memory range 0xf8000000-0xf9ffffff: good
pcib16: (null) requested memory range 0xf8000000-0xf9ffffff: good
pcib16: matched entry for 4.0.INTA
pcib16: slot 0 INTA hardwired to IRQ 16
pcib17: slot 0 INTA is routed to irq 16
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf8000000
bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bce1: bpf attached
bce1: Ethernet address: 00:13:72:60:ac:50
bce1: [MPSAFE]
uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at device 29.0 
on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcce0
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 52
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at device 29.1 
on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xccc0
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at device 29.2 
on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcca0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900400-0xfc9007ff irq 21 at 
device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfc900400
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
ukbd0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL  INC. DRAC5 VIRTUAL  MEDIA, rev 2.00/0.00, addr 4
umass0:1:0:-1: Attached to scbus1
umass1: DELL  INC. DRAC5 VIRTUAL  MEDIA, rev 2.00/0.00, addr 4
umass1:2:1:-1: Attached to scbus2
uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 5
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
ukbd1: Dell Dell USB Keyboard, rev 1.10/3.01, addr 6, iclass 3/1
kbd2 at ukbd1
kbd2: ukbd1, generic (0), config:0x0, flags:0x3d0000
pcib18: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib18:   secondary bus     18
pcib18:   subordinate bus   18
pcib18:   I/O decode        0xd000-0xdfff
pcib18:   memory decode     0xfc100000-0xfc2fffff
pcib18:   prefetched decode 0xd0000000-0xd7ffffff
pcib18:   Subtractively decoded bridge.
pci18: <ACPI PCI bus> on pcib18
pci18: physical bus=18
found->	vendor=0x1002, dev=0x515e, revid=0x02
 	bus=18, slot=13, func=0
 	class=03-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=10
 	powerspec 2  supports D0 D1 D2 D3  current D0
 	map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib18: (null) requested memory range 0xd0000000-0xd7ffffff: good
 	map[14]: type 4, range 32, base 0000dc00, size  8, enabled
pcib18: (null) requested I/O range 0xdc00-0xdcff: in range
 	map[18]: type 1, range 32, base fc1f0000, size 16, enabled
pcib18: (null) requested memory range 0xfc1f0000-0xfc1fffff: good
pcib18: matched entry for 18.13.INTA
pcib18: slot 13 INTA hardwired to IRQ 19
pci18: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
atapci1: <Intel 63XXESB2 SATA300 controller> port 
0xcc98-0xcc9f,0xcc90-0xcc93,0xcc80-0xcc87,0xcc78-0xcc7b,0xcc60-0xcc6f mem 
0xfc900000-0xfc9003ff irq 23 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc60
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 56
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc98
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcc90
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc80
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcc78
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: irq maps: 0x4c61 0x4c71 0x4c61 0x4c61
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio1: irq maps: 0x4c61 0x4c69 0x4c61 0x4c61
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xc8fff,0xc9000-0xccfff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132662 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 83125295 hz
Timecounter "TSC" frequency 2992518432 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, 
default to accept, logging unlimited
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 63XXESB2 chip
acd0: setting UDMA33 on 63XXESB2 chip
acd0: <TEAC CD-ROM CD-224E-N/3.AB> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 2 seconds for SCSI devices to settle
mpt0: Issuing TMF 0xffffffff86abf160:94 with MsgContext of 0x20004




--
Dennis Glatting





More information about the freebsd-questions mailing list