Sundry hardware issues on an Alderwood/Intel 925 Express board + 6.1-RELEASE

Juha Saarinen juhasaarinen at
Sat Oct 7 17:27:05 PDT 2006

>From dmesg on a freshly installed 6.1-RELEASE system:

acpi0: <IntelR AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR

pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)

pciconf -lv:

none0 at pci0:27:0:        class=0x040300 card=0x266817f2 chip=0x26688086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW Intel High DefiNition Audio Controller'
    class    = multimedia

none1 at pci0:31:3:        class=0x0c0500 card=0x266a17f2 chip=0x266a8086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW SMBus Controller'
    class    = serial bus
    subclass = SMBus

none2 at pci1:0:0: class=0x030000 card=0x31251458 chip=0x014010de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'GeForce 6600 GT'
    class    = display
    subclass = VGA

Is it possible to get these going?

Then there's this message:

acpi_tz0: failed to set new freq, disabling passive cooling

Is this:

a valid workaround?

This looks a bit more worrisome:

atapci1: <Intel ICH6 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfb00-0xfb0f at device 31.2 on
atapci1: failed to enable memory mapping!

Related to this?

Anything I could do about it?



More information about the freebsd-questions mailing list