(no subject)

[Cy Schubert]

Cheers,
Cy Schubert <Cy.Schubert at komquats.com>
FreeBSD UNIX:  <cy at FreeBSD.org>   Web:  http://www.FreeBSD.org

			e**(i*pi)+1=0

cc: 
Fcc:  note
Subject: Second if_ed Device (fwd)
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
--------
That should be an Elite-16 which is based on the WD8013 chip. I have so 
much old hardware here I really should get rid of it.




------- Forwarded Message

Date:    Fri, 19 May 2006 08:29:45 -0700
From:    Cy Schubert <Cy.Schubert at komquats.com>
To:      freebsd-questions at freebsd.org
Subject: Second if_ed Device

Is there any way to enable a second ISA ed device, as in ed1 under 6.1? I 
have two SMC 3c509-combo cards in the same machine. My device.hints file 
contains:

hint.ed.0.at="isa"
hint.ed.0.disabled="0"
hint.ed.0.port="0x280"
hint.ed.0.irq="10"
hint.ed.0.maddr="0xd8000"
hint.ed.1.at="isa"
hint.ed.1.disabled="0"
hint.ed.1.port="0x240"
hint.ed.1.irq="5"
hint.ed.1.maddr="0xd4000"

It only sees the first device and when I do bring it online to use it the 
system panics. I do recall having this problem a few years ago however I 
did replace the device with a PCI version. (Of course a system here with 
two PCI versions of the if_ed card works fine.) The last time this worked 
was under 4.X (or was it 3.x, it's been so long I can't remember) using:

device          ed0     at isa? port 0x280 irq 10 iomem 0xd8000
device          ed1     at isa? port 0x240 irq 5  iomem 0xd4000

Any ideas?



- -- 
Cheers,
Cy Schubert <Cy.Schubert at komquats.com>
FreeBSD UNIX:  <cy at FreeBSD.org>   Web:  http://www.FreeBSD.org

			e**(i*pi)+1=0



------- End of Forwarded Message