System Freezing -Again

Sat Mar 11 02:11:07 UTC 2006

Grant,

Are the two ethernet interfaces on the motherboard or on PCI cards?  What 
add-on cards are in the system?

         -Derek

At 01:33 PM 3/10/2006, Grant Peel wrote:
>Hi all,
>
>As mentioned in the recent past, I am getting lockups on my Dell PE 1850 
>w/ FreeBSD 6.0.
>
>Dmesg says ipv6 is initialized in the ipfw daemon... not sure if that is 
>OK since the kernel is compiled without ipv6/
>
>Also, just befor this last crasgh (today) I see the following in 
>/var/log/messages....is this normal? (ipfw entries):
>
>Mar 10 09:29:39 s1 kernel: 6:110 216.221.88.85:49447 out via em0
>Mar 10 09:33:16 s1 kernel: em0
>Mar 10 10:03:13 s1 kernel: 5:110 70.48.38.90:1305 out via em0
>Mar 10 10:10:56 s1 kernel: .34.137.45:25 in via em0
>Mar 10 10:10:56 s1 kernel: 81.25:58023 out via em0
>Mar 10 10:10:56 s1 kernel: 34.137.45:25 in via em0
>Mar 10 10:10:56 s1 kernel: 34.137.45:25 in via em0
>Mar 10 10:10:56 s1 kernel: .34.137.45:25 in via em0
>Mar 10 10:16:36 s1 kernel: <<110>ipfw: 50020 Accept TCP 
>209.226.175.185:63728 64.34.137.45:25 in via em0
>Mar 10 10:16:36 s1 kernel: 110>ipfw: 50020 Accept TCP 64.34.137.45:25 
>209.226.175.185:63728 out via em0
>Mar 10 10:20:04 s1 kernel:
>Mar 10 10:36:42 s1 kernel: .25:63415 out via em0
>Mar 10 10:36:42 s1 kernel: 5
>Mar 10 10:36:42 s1 kernel: 63415 out via em0
>Mar 10 10:36:42 s1 kernel:
>Mar 10 10:36:42 s1 kernel: 7.45:25 in via em0
>Mar 10 10:36:42 s1 kernel: 37.45:25 in via em0
>Mar 10 10:36:42 s1 kernel:
>Mar 10 11:20:47 s1 kernel:
>Mar 10 11:24:51 s1 kernel: 50020 Accept TCP 64.34.137.45:110 
>70.48.38.90:1729 out via em0
>Mar 10 11:36:14 s1 kernel: ipfw: 50020 Accept TCP 64.34.137.47:110 
>216.9.250.224:57245 out via em0
>Mar 10 11:48:15 s1 kernel: 137.45:110 70.48.38.90:1585 out via em0
>
>
>Also, I have the atkbd disabled so I can take advantage of the DRAC 
>console, it needs ukbd, to connect. If the console (ukbd) dissconnects, is 
>it possible the system console is disconnecting such that the machine 
>can't even talk to itself?
>
>As mentioned before, there is nothing anywhere in any log file that 
>indicates any faults. Also, there is nothing in the sustems SEL fhat 
>indicate any issues.
>
>Immediately after today's crash, I had the NOC tech check the machine. The 
>physical state, all LEDs, CPU fan, motherboard fan, power supply etc.. 
>appeared to be that of a running machine. Even the NICs werer connected 
>and blinking.
>
>Perhaps I should reinstall the GENERIC kernel?
>
>-Grant
>
>----- Original Message -----
>From: <mailto:gpeel at thenetnow.com>Grant Peel
>To: <mailto:freebsd-questions at freebsd.org>freebsd-questions at freebsd.org ; 
><mailto:derek at computinginnovations.com>Derek Ragona
>Sent: Thursday, March 09, 2006 6:28 PM
>Subject: Re: System Freezing -Again
>
>Sorry Derek, I did forget the dmesg ... here it is ...
>
>Also, Do you think the "^@" s not a hint to something?
>
>root on s1# more dmesg.boot
>Copyright (c) 1992-2005 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
>FreeBSD 6.0-RELEASE #1: Wed Jan 25 09:15:04 EST 2006
> 
><mailto:gpeel at s1.fpm3.com:/usr/src/sys/i386/compile/DS9>gpeel at s1.fpm3.com:/usr/src/sys/i386/compile/DS9
>MPTable: <DELL     PE 016C     >
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.71-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
> 
>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS
>E2,SS,HTT,TM,PBE>
>   Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
>   AMD Features=0x20100000<NX,LM>
>   Hyperthreading: 2 logical CPUs
>real memory  = 536608768 (511 MB)
>avail memory = 515801088 (491 MB)
>ioapic0: Changing APIC ID to 2
>ioapic0: Assuming intbase of 0
>ioapic1: Changing APIC ID to 3
>ioapic1: Assuming intbase of 24
>ioapic2: Changing APIC ID to 4
>ioapic2: Assuming intbase of 48
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ioapic1 <Version 2.0> irqs 24-47 on motherboard
>ioapic2 <Version 2.0> irqs 48-71 on motherboard
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>cpu0 on motherboard
>pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
>pci0: <PCI bus> on pcib0
>pcib1: <PCI-PCI bridge> at device 2.0 on pci0
>pci1: <PCI bus> on pcib1
>pcib2: <MPTable PCI-PCI bridge> at device 0.0 on pci1
>pci2: <PCI bus> on pcib2
>mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem 
>0xdfdf0000-0xdfdfffff,0xdfde0000-0xdfdeffff irq 26 at device 5.0 o
>n pci2
>mpt0: [GIANT-LOCKED]
>mpt0: MPI Version=1.2.12.0
>mpt0: Unhandled Event Notify Frame. Event 0xa.
>pcib3: <MPTable PCI-PCI bridge> at device 0.2 on pci1
>pci3: <PCI bus> on pcib3
>pcib4: <PCI-PCI bridge> at device 4.0 on pci0
>pci4: <PCI bus> on pcib4
>pcib5: <PCI-PCI bridge> at device 5.0 on pci0
>pci5: <PCI bus> on pcib5
>pcib6: <MPTable PCI-PCI bridge> at device 0.0 on pci5
>pci6: <PCI bus> on pcib6
>em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 
>0xdcc0-0xdcff mem 0xdfae0000-0xdfafffff irq 48 at device 7.0
>  on pci6
>em0: Ethernet address: 00:14:22:1c:d5:7e
>em0:  Speed:N/A  Duplex:N/A
>pcib7: <MPTable PCI-PCI bridge> at device 0.2 on pci5
>pci7: <PCI bus> on pcib7
>em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 
>0xccc0-0xccff mem 0xdf8e0000-0xdf8fffff irq 49 at device 8.0
>  on pci7
>em1: Ethernet address: 00:14:22:1c:d5:7f
>em1:  Speed:N/A  Duplex:N/A
>pcib8: <PCI-PCI bridge> at device 6.0 on pci0
>pci8: <PCI bus> on pcib8
>uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xace0-0xacff irq 
>16 at device 29.0 on pci0
>uhci0: [GIANT-LOCKED]
>usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xacc0-0xacdf irq 
>19 at device 29.1 on pci0
>uhci1: [GIANT-LOCKED]
>usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xaca0-0xacbf irq 
>18 at device 29.2 on pci0
>uhci2: [GIANT-LOCKED]
>usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff00000-0xdff003ff irq 
>23 at device 29.7 on pci0
>ehci0: [GIANT-LOCKED]
>usb3: EHCI version 1.0
>usb3: companion controllers, 2 ports each: usb0 usb1 usb2
>usb3: <EHCI (generic) USB 2.0 controller> on ehci0
>usb3: USB revision 2.0
>uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>uhub3: 6 ports with 6 removable, self powered
>uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
>uhub4: multiple transaction translators
>uhub4: 2 ports with 2 removable, self powered
>pcib9: <MPTable PCI-PCI bridge> at device 30.0 on pci0
>pci9: <PCI bus> on pcib9
>pci9: <unknown> at device 5.0 (no driver attached)
>pci9: <unknown> at device 5.1 (no driver attached)
>pci9: <unknown> at device 5.2 (no driver attached)
>atapci0: <SiI 0680 UDMA133 controller> port 
>0xbcf0-0xbcf7,0xbce4-0xbce7,0xbcd8-0xbcdf,0xbcd0-0xbcd3,0xbc70-0xbc7f mem 
>0xdf5fec
>00-0xdf5fecff irq 23 at device 6.0 on pci9
>ata2: <ATA channel 0> on atapci0
>ata3: <ATA channel 1> on atapci0
>pci9: <display, VGA> at device 13.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci1: <Intel ICH5 UDMA100 controller> port 
>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
>ata0: <ATA channel 0> on atapci1
>ata1: <ATA channel 1> on atapci1
>pmtimer0 on isa0
>orm0: <ISA Option ROMs> at iomem 
>0xc0000-0xcafff,0xcb000-0xcefff,0xec000-0xeffff on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>ppc0: parallel port not found.
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>unknown: <PNP0c02> can't assign resources (memory)
>unknown: <PNP0501> can't assign resources (port)
>unknown: <PNP0303> can't assign resources (port)
>unknown: <PNP0c02> can't assign resources (port)
>unknown: <PNP0c01> can't assign resources (port)
>ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
>kbd0 at ukbd0
>Timecounter "TSC" frequency 2992710990 Hz quality 800
>Timecounters tick every 1.000 msec
>acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33
>device_attach: afd0 attach returned 6
>acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave PIO3
>Waiting 5 seconds for SCSI devices to settle
>ses0 at mpt0 bus 0 target 6 lun 0
>ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device
>ses0: 3.300MB/s transfers
>ses0: SAF-TE Compliant Device
>da0 at mpt0 bus 0 target 0 lun 0
>da0: <SEAGATE ST373207LC D701> Fixed Direct Access SCSI-3 device
>da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing 
>Enabled
>da0: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C)
>Trying to mount root from ufs:/dev/da0s1a
>WARNING: / was not properly dismounted
>WARNING: /home was not properly dismounted
>WARNING: /usr was not properly dismounted
>WARNING: /var was not properly dismounted
>ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding 
>disabled, default to deny, logging disabled
>root on s1#
>----- Original Message -----
>From: <mailto:derek at computinginnovations.com>Derek Ragona
>To: <mailto:gpeel at thenetnow.com>Grant Peel ; 
><mailto:freebsd-questions at freebsd.org>freebsd-questions at freebsd.org
>Sent: Thursday, March 09, 2006 6:19 PM
>Subject: Re: System Freezing -Again
>
>A freeze like you describe, no logging sounds like a hardware 
>problem.  You didn't include a current dmesg or other system 
>inventory.  You may have shared irq's causing the problem, or a power 
>supply, or a management board.
>
>Those are the three things I would look at.
>
>         -Derek
>
>
>At 05:00 PM 3/9/2006, Grant Peel wrote:
>>Hi all,
>>
>>I have been pestering everyone who will listen on this, and have yet to 
>>find a solution ... so here goes again!
>>
>>I have a FreeBSD system on a Dell PE 1850 that has been randomly freezing 
>>up from time to time in the past two weeks.
>>
>>Firewall is enabled, but is very solid as I am using the same rules on 
>>several other machines.
>>
>>I spent last Saturday and Sunday at the NOC, running Dell 32 bit 
>>diagnostics on it, along with memtest32, no errors found over many hours 
>>of testing.
>>
>>NO heat of note from the Power supply CPU or system fan.
>>
>>Nothing ever in log files, no core dumps. I have the DUMDEV="AUTO" set in 
>>rc.conf, but ran dumpon -v /dev/da0s1b today, the output showed it should 
>>be dumping to my swap partition.
>>
>>APIC is disabled now, but has been enabled in the past, with the same 
>>results. POwer management is shut off in the bios.
>>
>>No System Events are being recorded in BIOS, and, the logs were harvested 
>>last week with no abnormalitied showing.
>>
>>The only item of note, that I found after todays freeze, was in 
>>/var/log/maillog, and /var/log/exim/mainlog,   about 15 lines of ^@ 
>>recorded at about the exact tine of the freeze. Does anyone think this is 
>>significant, or is it simply a symptom of the crash?
>>
>>ANY help will be greatly appreciated.
>>
>>-GRant
>>
>>_______________________________________________
>>freebsd-questions at freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"