FBSD 6.0 and ppp
fbsd at a1poweruser.com
Fri Jun 9 18:54:16 UTC 2006
You have to use modem "AT" commands to tell FreeBSD modem to answer
in coming calls.
I complete detailed write up on 'user ppp' for answering incoming
calls can be found in the install guide at www.a1poweruser.com.
From: owner-freebsd-questions at freebsd.org
[mailto:owner-freebsd-questions at freebsd.org]On Behalf Of
jhall at vandaliamo.net
Sent: Friday, June 09, 2006 2:07 PM
To: freebsd-questions at freebsd.org
Subject: FBSD 6.0 and ppp
I am trying to setup a remote FreeBSD server to allow me to dial in
check the network in case the WAN link goes does. I accomplished
with 5.3, and cannot figure out what I am doing wrong on FBSD 6.0.
dialing using WIndows XP to establish a PPP connection
I am using the second method outlined in man ppp.
I added the following line to /etc/gettytab.
/etc/ttys was changed to
ttyd0 "/usr/libexec/getty std.38400" dialup on secure
/usr/local/bin/ppplogin was created and permissions are 775.
The following was added to /etc/ppp/ppp.conf
set device /dev/cuad0
set ifaddr 10.0.0.1 10.0.0.0/24
allow users xxxx
When the connection is initially dialed, I see tun1 opened (tun0 is
connection) and the PID displayed. However, the Windows system
Verifying Password and will eventually report error 721.
Firewall rules are in place and allow all traffic from tun1.
Any suggestions would be greatly appreciated.
freebsd-questions at freebsd.org mailing list
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe at freebsd.org"
More information about the freebsd-questions