Can't print to hplip+CUPS+LJ1160Le

Anthony Agelastos iqgrande at gmail.com
Wed Jul 26 10:44:23 UTC 2006


On Jul 25, 2006, at 11:22 PM, Anthony Agelastos wrote:

If I wait even longer, /var/log/messages adds the following:

</var/log/messages>
<snip>
Jul 25 22:52:33 dell python: hpssd [ERROR] Not found
Jul 25 22:52:33 dell python:  [ERROR] Unsupported printer model.
</var/log/messages>

I am willing to try the updated hplip (1.6.6). How do I go about  
doing so?

> Hello,
>
> I still cannot print to my network print server from any other  
> computer (although it prints fine on the server itself such as a  
> test page). If you read this and do not know how to help me, but  
> have a similar setup working, please at least inform me; the last  
> several posts (here, on cups.org, and on hplip.sf.net) have been  
> unanswered.
>
> Lately when I turn the computer on and wait, I see the following  
> messages in /var/log/messages:
>
> </var/log/messages>
> Jul 25 22:49:20 dell python: hpssd [ERROR] Not found
> Jul 25 22:49:20 dell hp: invalid ModelQueryResult:  
> msg=modelqueryresult result-c
> ode=48  prnt/hpijs/hplip_api.c 396
> Jul 25 22:49:20 dell kernel: All threads purged from ugen0.1
> Jul 25 22:49:20 dell kernel: All threads purged from ugen0.2
> Jul 25 22:49:26 dell python: hpssd [ERROR] Not found
> </var/log/messages>
>
> When this is coupled with the errors I receive when I run hp-setup,  
> namely
>
> <hp-setup -a>
> dell# hp-setup -a
>
> HP Linux Imaging and Printing System (ver. 0.9.11)
> Printer/Fax Setup Utility ver. 2.0
>
> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
> This software comes with ABSOLUTELY NO WARRANTY.
> This is free software, and you are welcome to distribute it
> under certain conditions. See COPYING file for more details.
>
> Using device: hp:/usb/hp_LaserJet_1160_series?serial=00CNG1R02434
>
> Setting up device: hp:/usb/hp_LaserJet_1160_series?serial=00CNG1R02434
>
>
> [ERROR]: Unsupported printer model.
> </hp-setup -a>
>
> it tells me that hplip is having issues with my printer (hp  
> LaserJet 1160Le). According to http://hplip.sourceforge.net/ 
> supported_devices/laser.html , my printer is supported (although I  
> a unsure if hplip 0.9.11 had the support or if it was added in the  
> 1.66-series). So, does anyone have any ideas? I can print on the  
> server (and it looks fine). I test this with the CUPS web interface  
> option of printing a test page. When I print from the other  
> computers (Apple laptops) on my LAN, the status of the job hangs at  
> "stopped at novalue". I have attached to this email the following  
> files:
>
> /var/log/cups/error_log
> /var/log/messages
> /etc/rc.conf
> /etc/devfs.rules
> /etc/make.conf
> (the KERNEL config file that is running)
> /usr/local/etc/cups/cupsd.conf
> /usr/local/etc/cups/printers.conf
>
> These files should completely define the problem and the system  
> that is running. Could somebody please assist me? Thank you for  
> your assistance.
>
> -Anthony Agelastos
>
> <cupsHelp.tar.bz2>



More information about the freebsd-questions mailing list