Bluetooth adapter on the FreeBSD.

[Lowell Gilbert]

Andrey Slusar <anrays at gmail.com> writes:

> I have the 100m USB bluetooth adapter. It's adapter is supported by
> ng_ubt module and not really work. It's the log:
> --8<---------------cut here---------------start------------->8---
> ubt0: <vendor 0x1131 ISSCBTA, class 224/1, rev 1.10/3.73, addr 3> on uhub0
> ubt0: vendor 0x1131 ISSCBTA, rev 1.10/3.73, addr 3
> ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
> ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPack
> etSize=49; nframes=6, buffer size=294
> WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
> WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
> ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3
> , OCF=0x3. Timeout
> --8<---------------cut here---------------end--------------->8---
> ~#hccontrol -n ubt0hci initialize
> hccontrol: Could not find HCI nodes
> ~#ngctl types 
> There are 7 total types:
>       Type name   Number of living nodes
>       ---------   ----------------------
>          socket       1
>      btsock_l2c       1
>  btsock_l2c_raw       1
>  btsock_hci_raw       1
>           l2cap       0
>             hci       0
>             ubt       1
> ~#ngctl status ubt0
> ngctl: send msg: No such file or directory
>
> Why it's is not work?

Do you have *all* of the needed kernel functionality loaded (normally
with "/etc/rc.bluetooth start <dev>")? 

-- 
Lowell Gilbert, embedded/networking software engineer, Boston area
		http://be-well.ilk.org/~lowell/