need help setting up wireless on my computer
Brian John
brianjohn at fusemail.com
Mon Jan 2 20:07:30 PST 2006
> On Mon, 2 Jan 2006 20:23:30 -0600 (CST)
> "Brian John" <brianjohn at fusemail.com> wrote:
>
> > > On Mon, 02 Jan 2006 14:17:17 -0600
> > > Brian John <brianjohn at fusemail.com> wrote:
> > >
> > > > Hello,
> > > > I just went to compUSA and bought their generic 802.11g PCI
> > > > wireless card. I was able to install it using the windows
> > > > drivers at ndis0 (see output from ifconfig below).
> > > >
> > > > The problem I'm having is I seem to be able to connect, but can't
> > > > talk to anything. I am using WEP encryption and I am not
> > > > broadcasting my SSID. My laptop running windows works flawlessly.
> > > >
> > > > I've tried this command to connect to the network:
> > > > ifconfig ndis0 inet 192.168.0.10 netmask 255.255.255.255 ssid
> > > > Brian wepmode on wepkey <my key> channel 9
> > > >
> > > > ...and it seems to connect (see output from ifconfig after
> > > > connected below). However, I can't ping my router and I can't
> > > > get on the Internet. Can someone please help me out?
> > > >
> > > > Thanks
> > > >
> > > > /Brian
> > > >
> > > >
> > > > output from ifconfig:
> > > > -----------------------------------
> > > > ifconfig ndis0
> > > > ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> > > > inet 192.168.0.1 netmask 0xffffff00 broadcast
> > > > 192.168.0.255 inet6 fe80::20e:2eff:fe6d:4c9d%ndis0 prefixlen 64
> > > > scopeid 0x4 ether 00:0e:2e:6d:4c:9d
> > > > media: IEEE 802.11 Wireless Ethernet autoselect
> > > > status: no carrier
> > > > ssid ""
> > > > channel -1 authmode OPEN powersavemode OFF powersavesleep
> > > > 100 rtsthreshold 2312 protmode CTS
> > > > wepmode MIXED weptxkey 1
> > > > wepkey 1:40-bit
> > > >
> > > > output from ifconfig after connected:
> > > > --------------------------------------------------------------
> > > > ifconfig ndis0
> > > > ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> > > > inet6 fe80::20e:2eff:fe6d:4c9d%ndis0 prefixlen 64 scopeid
> > > > 0x4 inet 192.168.0.10 netmask 0xffffffff broadcast 192.168.0.10
> > > > ether 00:0e:2e:6d:4c:9d
> > > > media: IEEE 802.11 Wireless Ethernet autoselect
> > > > (OFDM/54Mbps) status: associated
> > > > ssid Brian 1:Brian
> > > > channel 9 authmode OPEN powersavemode OFF powersavesleep
> > > > 100 rtsthreshold 2312 protmode CTS
> > > > wepmode MIXED weptxkey 1
> > > > wepkey 1:40-bit
> > > > _______________________________________________
> > > > freebsd-questions at freebsd.org mailing list
> > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > > To unsubscribe, send any mail to
> > > > "freebsd-questions-unsubscribe at freebsd.org"
> > >
> > > 1. Your netmask should not be 255.255.255.255. Try
> > > 255.255.255.0 instead.
> > >
> > I tried this (255.255.255.0 is the correct netmask) but it still
> > doesn't work.
> >
> > > 2. Have you configured the computer with gateway and name server
> > > information?
> > >
> > I have not. I didn't have to do this for the ethernet card that I
> > have in the machine and it works, should I have to do it for wireless?
> >
> > > 3. When in Windows, did you configure the network manually? Or did
> > > you use DHCP?
> > >
> > I use DHCP in Windows. This is one of the things I thought might be
> > the problem. Can you tell me how to set this up to use DHCP?
> > The command that the FreeBSD handbook told me to use includes
> > specifying the IP Address.
> >
> > Thanks a million for the help.
> >
> > /Brian
> >
> > > Best of luck,
> > >
> > > Andrew
> > >
> > >
> > >
>
> To continue using manual network configuration:
>
> 1. Identify the default gateway's IP address in /etc/rc.conf:
>
> defaultrouter="xxx.xxx.xxx.xxx"
>
> 2. Add your nameserver's IP address to /etc/resolv.conf:
>
> nameserver xxx.xxx.xxx.xxx
>
> If you want to activate DHCP:
>
> 1. Eliminate the IP address and netmask from your ifconfig command. The
> ifconfig command will still be used to identify the ssid and provide
> the wep key.
>
> 2. Execute the ifconfig command. The interface needs to be configured
> with the ssid and wep key _before_ using DHCP.
>
> 3. Activate the DHCP client:
>
> dhclient ndis0
>
> Hopefully, this will work for you.
>
> Andrew
>
>
>
I tried this. This time the command executed but the wireless adapter
didn't get an IP Address and doesn't show any of my wireless settings when
I run ifconfig -a. Is there another command I need to do to acquire the
IP Address from DHCP?
Related commands and output are below.
Thanks
/Brian
Command I used to configure the adapter:
ifconfig ndis0 ssid Brian wepmode on wepkey <my key> channel 9
ifconfig output after running all commands:
ndis0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:0e:2e:6d:4c:9d
media: IEEE 802.11 Wireless Ethernet autoselect
status: no carrier
ssid ""
channel -1 authmode OPEN powersavemode OFF powersavesleep 100
rtsthreshold 2312 protmode CTS
wepmode MIXED weptxkey 1
wepkey 1:40-bit
More information about the freebsd-questions
mailing list