if_nfe on nVidia chipset
Palle Girgensohn
girgen at FreeBSD.org
Tue Dec 19 09:31:00 PST 2006
--On söndag, december 17, 2006 01.06.24 +0900 Shigeaki Tagashira
<shigeaki at se.hiroshima-u.ac.jp> wrote:
> I have the same one. And if_nfe works well on it, in both FreeBSD
> 6.2-PRERELEASE and 7-CURRENT. Please try to initialize if_nfe using
> ifconfig command;
># ifconfig nfe1 down; ifconfig nfe1 up
>
> ---
> S. Tagashira
Hi Tagashira-san,
Tried a lot of stuff, up and down and also "debug" flag, but nothing helps.
ifconfig says "media: Ethernet autoselect (none)"
I can ping the interface itself, but nothing else.
Any ideas?
Regards,
Palle
>
> Palle Girgensohn wrote:
>> Hi! Sorry for the cross post, I'd love to know if I can get this working
>> or not.
>>
>> Regards,
>> Palle
>>
>> ---------- Forwarded Message ----------
>> Date: tisdag, december 12, 2006 18.52.35 +0100
>> From: Palle Girgensohn <girgen at FreeBSD.org>
>> To: hardware at freebsd.org
>> Subject: if_nfe on Asus M2N-SLI deluxe?
>>
>> Hi!
>>
>> Does anybody know if if_nfe should work on the above motherboard? I
>> snached the patch for FreeBSD-6.2 from
>> <http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html> and
>> tried it. The kernel and ifconfig seems happy, but it does not work;
>> ifconfig reports "active" but ifconfig reports:
>>
>> nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>> options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>> ether 00:17:31:86:aa:31
>> media: Ethernet autoselect (none)
>> status: no carrier
>> nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>> options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>> inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid 0x4
>> inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255
>> ether 00:17:31:86:b4:c6
>> media: Ethernet autoselect (none)
>> status: active
>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64
>> scopeid 0x5 inet 127.0.0.1 netmask 0xff000000
>> The media part of nfe1 looks bad, eh?
>>
>> Is it supposed to work? How can I help to get it working?
>>
>> FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else
>> needed?
>>
>> /Palle
>>
>>
>>
>> ---------- End Forwarded Message ----------
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> Subject:
>> if_nfe on Asus M2N-SLI deluxe?
>> From:
>> Palle Girgensohn <girgen at FreeBSD.org>
>> Date:
>> Tue, 12 Dec 2006 18:52:35 +0100
>> To:
>> hardware at freebsd.org
>>
>> To:
>> hardware at freebsd.org
>> CC:
>> obrien at freebsd.org
>>
>>
>> Hi!
>>
>> Does anybody know if if_nfe should work on the above motherboard? I
>> snached the patch for FreeBSD-6.2 from
>> <http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html> and
>> tried it. The kernel and ifconfig seems happy, but it does not work;
>> ifconfig reports "active" but ifconfig reports:
>>
>> nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>> options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>> ether 00:17:31:86:aa:31
>> media: Ethernet autoselect (none)
>> status: no carrier
>> nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>> options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>> inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid
>> 0x4 inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255
>> ether 00:17:31:86:b4:c6
>> media: Ethernet autoselect (none)
>> status: active
>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64
>> scopeid 0x5 inet 127.0.0.1 netmask 0xff000000
>> The media part of nfe1 looks bad, eh?
>>
>> Is it supposed to work? How can I help to get it working?
>>
>> FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else
>> needed?
>>
>> /Palle
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> Copyright (c) 1992-2006 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>> The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 6.2-PRERELEASE #0: Wed Nov 29 11:57:06 CET 2006
>> girgen at rambutan.pingpong.net:/usr/obj/.a/banan/usr/src/sys/WORKSTATI
>> ON Timecounter "i8254" frequency 1193182 Hz quality 0
>> CPU: AMD Athlon(tm) 64 Processor 3500+ (2210.20-MHz 686-class CPU)
>> Origin = "AuthenticAMD" Id = 0x40ff2 Stepping = 2
>> Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
>> E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
>> Features2=0x2001<SSE3,CX16>
>> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
>> AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
>> real memory = 2146369536 (2046 MB)
>> avail memory = 2091245568 (1994 MB)
>> ACPI APIC Table: <Nvidia AWRDACPI>
>> ioapic0 <Version 1.1> irqs 0-23 on motherboard
>> acpi0: <Nvidia AWRDACPI> on motherboard
>> acpi_bus_number: can't get _ADR
>> acpi_bus_number: can't get _ADR
>> acpi_bus_number: can't get _ADR
>> acpi_bus_number: can't get _ADR
>> acpi0: Power Button (fixed)
>> acpi_bus_number: can't get _ADR
>> acpi_bus_number: can't get _ADR
>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>> cpu0: <ACPI CPU> on acpi0
>> acpi_button0: <Power Button> on acpi0
>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>> pci0: <ACPI PCI bus> on pcib0
>> pci0: <memory, RAM> at device 0.0 (no driver attached)
>> isab0: <PCI-ISA bridge> at device 1.0 on pci0
>> isa0: <ISA bus> on isab0
>> pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
>> pci0: <memory, RAM> at device 1.2 (no driver attached)
>> ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21
>> at device 2.0 on pci0 ohci0: [GIANT-LOCKED]
>> usb0: OHCI version 1.0, legacy support
>> usb0: SMM does not respond, resetting
>> usb0: <OHCI (generic) USB controller> on ohci0
>> usb0: USB revision 1.0
>> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>> uhub0: 10 ports with 10 removable, self powered
>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq
>> 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED]
>> usb1: EHCI version 1.0
>> usb1: companion controller, 10 ports each: usb0
>> usb1: <EHCI (generic) USB 2.0 controller> on ehci0
>> usb1: USB revision 2.0
>> uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>> uhub1: 10 ports with 10 removable, self powered
>> atapci0: <nVidia nForce MCP55 UDMA133 controller> port
>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 4.0 on pci0
>> ata0: <ATA channel 0> on atapci0
>> ata1: <ATA channel 1> on atapci0
>> atapci1: <nVidia nForce MCP55 SATA300 controller> port
>> 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem
>> 0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0 ata2: <ATA channel 0>
>> on atapci1
>> ata3: <ATA channel 1> on atapci1
>> atapci2: <nVidia nForce MCP55 SATA300 controller> port
>> 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem
>> 0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0 ata4: <ATA channel 0>
>> on atapci2
>> ata5: <ATA channel 1> on atapci2
>> atapci3: <nVidia nForce MCP55 SATA300 controller> port
>> 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f
>> mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0 ata6: <ATA
>> channel 0> on atapci3
>> ata7: <ATA channel 1> on atapci3
>> pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>> pci1: <ACPI PCI bus> on pcib1
>> fxp0: <Intel 82558 Pro/100 Ethernet> port 0xac00-0xac1f mem
>> 0xfdeff000-0xfdefffff,0xfdc00000-0xfdcfffff irq 16 at device 6.0 on pci1
>> miibus0: <MII bus> on fxp0
>> inphy0: <i82555 10/100 media interface> on miibus0
>> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>> fxp0: Ethernet address: 00:a0:c9:ce:11:26
>> fwohci0: <Texas Instruments TSB43AB22/A> mem
>> 0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 19 at device 11.0 on pci1
>> fwohci0: OHCI version 1.10 (ROM=1)
>> fwohci0: No. of Isochronous channels is 4.
>> fwohci0: EUI64 00:11:d8:00:00:c8:2b:85
>> fwohci0: Phy 1394a available S400, 2 ports.
>> fwohci0: Link S400, max_rec 2048 bytes.
>> firewire0: <IEEE1394(FireWire) bus> on fwohci0
>> fwe0: <Ethernet over FireWire> on firewire0
>> if_fwe0: Fake Ethernet address: 02:11:d8:c8:2b:85
>> fwe0: Ethernet address: 02:11:d8:c8:2b:85
>> fwe0: if_start running deferred for Giant
>> sbp0: <SBP-2/SCSI over FireWire> on firewire0
>> fwohci0: Initiate bus reset
>> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>> firewire0: bus manager 0 (me)
>> pci0: <multimedia> at device 6.1 (no driver attached)
>> nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem
>> 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23
>> at device 8.0 on pci0 miibus1: <MII bus> on nfe0
>> e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus1
>> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
>> 1000baseTX-FDX, auto nfe0: Ethernet address: 00:17:31:86:aa:31
>> nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem
>> 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20
>> at device 9.0 on pci0 miibus2: <MII bus> on nfe1
>> e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus2
>> e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
>> 1000baseTX-FDX, auto nfe1: Ethernet address: 00:17:31:86:b4:c6
>> pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
>> pci2: <ACPI PCI bus> on pcib2
>> pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
>> pci3: <ACPI PCI bus> on pcib3
>> pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
>> pci4: <ACPI PCI bus> on pcib4
>> pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
>> pci5: <ACPI PCI bus> on pcib5
>> pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
>> pci6: <ACPI PCI bus> on pcib6
>> atapci4: <JMicron JMB363 SATA300 controller> port
>> 0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8c00-0x8c0f
>> mem 0xfdafe000-0xfdafffff irq 16 at device 0.0 on pci6 atapci4: AHCI
>> Version 01.00 controller with 2 ports detected
>> ata8: <ATA channel 0> on atapci4
>> ata9: <ATA channel 1> on atapci4
>> ata10: <ATA channel 2> on atapci4
>> pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
>> pci7: <ACPI PCI bus> on pcib7
>> nvidia0: <GeForce 6200 TurboCache(TM)> mem
>> 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 16
>> at device 0.0 on pci7 nvidia0: [GIANT-LOCKED]
>> acpi_tz0: <Thermal Zone> on acpi0
>> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
>> acpi0 fdc0: [FAST]
>> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
>> acpi0 sio0: type 16550A
>> ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
>> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
>> ppbus0: <Parallel port bus> on ppc0
>> ppi0: <Parallel I/O> on ppbus0
>> lpt0: <Printer> on ppbus0
>> lpt0: Interrupt-driven port
>> pmtimer0 on isa0
>> orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd67ff on isa0
>> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> atkbd0: [GIANT-LOCKED]
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> sio1: configured irq 3 not in bitmap of probed irqs 0
>> sio1: port may not be enabled
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>> ukbd0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/1
>> kbd1 at ukbd0
>> uhid0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/1
>> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 3, iclass 3/1
>> ums0: 6 buttons and Z dir.
>> Timecounter "TSC" frequency 2210201999 Hz quality 800
>> Timecounters tick every 0.801 msec
>> ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
>> disabled, default to accept, logging disabled ad0: 152627MB <Seagate
>> ST3160212A 3.AAJ> at ata0-master UDMA100 acd0: DVDR <Optiarc DVD RW
>> AD-5170A/1.11> at ata0-slave UDMA66
>> cd0 at ata0 bus 0 target 1 lun 0
>> cd0: <Optiarc DVD RW AD-5170A 1.11> Removable CD-ROM SCSI-0 device
>> cd0: 66.000MB/s transfers
>> cd0: Attempt to query device size failed: NOT READY, Medium not present
>> Trying to mount root from ufs:/dev/ad0s1a
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> freebsd-hardware at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
>> To unsubscribe, send any mail to
>> "freebsd-hardware-unsubscribe at freebsd.org"
More information about the freebsd-questions
mailing list