Fwd: DGE-530T nic not found on 5.5
Derrick Ryalls
ryallsd at gmail.com
Mon Dec 4 10:54:58 PST 2006
[Resending with more info]
Greetings, I have a fileserver I installed this nic on but the device
fails to show in ifconfig
uname:
5.5-STABLE FreeBSD 5.5-STABLE #2: Sun Oct 29 14:12:46 PST 2006
user at somewhere.com:/usr/obj/usr/src/sys/FRODO
Except from FRODO kernel file (generic plus some):
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device lge # Level 1 LXT1001 gigabit ethernet
device nge # NatSemi DP83820 gigabit ethernet
device pcn # AMD Am79C97x PCI 10/100 (precedence
over 'lnc')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
dmesg except:
pci0: <network, ethernet> at device 6.0 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xdc00-0xdcff mem
0xdfffbe00-0xdfffbeff
irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: xx:xx:xx:xx:xx:xx
The reference to vr0 are for the onboard nic that it is currently
running off of.
ifconfig lists vr0, plip0, lo0
===[frodo][root] ~ # pciconf -l
agp0 at pci0:0:0: class=0x060000 card=0x00001106 chip=0x30991106 rev=0x00 hdr=0x00
pcib1 at pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0991106 rev=0x00 hdr=0x01
none0 at pci0:6:0: class=0x020000 card=0x4b011186 chip=0x4b011186 rev=0x11 hdr=0x00
uhci0 at pci0:16:0: class=0x0c0300 card=0x76401462 chip=0x30381106
rev=0x80 hdr=0x00
uhci1 at pci0:16:1: class=0x0c0300 card=0x76401462 chip=0x30381106
rev=0x80 hdr=0x00
uhci2 at pci0:16:2: class=0x0c0300 card=0x76401462 chip=0x30381106
rev=0x80 hdr=0x00
ehci0 at pci0:16:3: class=0x0c0320 card=0x76401462 chip=0x31041106
rev=0x82 hdr=0x00
isab0 at pci0:17:0: class=0x060100 card=0x00001106 chip=0x31771106
rev=0x00 hdr=0x00
atapci0 at pci0:17:1: class=0x01018a card=0x76401462 chip=0x05711106
rev=0x06 hdr=0x00
vr0 at pci0:18:0: class=0x020000 card=0x01021106 chip=0x30651106 rev=0x74 hdr=0x00
none1 at pci1:0:0: class=0x030000 card=0x000da0a0 chip=0x002d10de rev=0x15 hdr=0x00
Doing some searching, someone posted this part of dmesg on a 5.4
PRERELEASE system:
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0x7400-0x74ff mem
0xfb800000-0xfb803fff irq 18 at device 10.0 on pci2
skc0: (null) rev. (0x1)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0f:3d:f2:45:0c
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
auto
I did check the hardware notes before buying this nic, and according
to http://www.freebsd.org/releases/5.5R/hardware-i386.html it is
supported. Have I missed a switch somewhere?
Thanks in advance.
-Derrick
More information about the freebsd-questions
mailing list