Two Dell PE1850s keep locking up...
Derek Ragona
derek at computinginnovations.com
Sat Aug 19 19:53:45 UTC 2006
Here are a few things I would try:
Update all the firmware in both dells. Then run the dell diagnostics to
see if ANYTHING shows up as a problem.
Check your disk space and swap, make sure you have enough of both.
If it still is causing problems do your best to find a repeatable case to
post in detail like it breaks when compiling some part of the kernel everytime.
-Derek
At 02:28 PM 8/19/2006, Jason Lixfeld wrote:
>(Please forgive the verbosity of this note)
>
>I have two identically configured Dell PowerEdge 1850 servers running
>FreeBSD 6.1-R-p3. Both of these machines seem to lock up under
>whatever load conditions are are present during compiling
>applications. The most recent lockup on one machine was while
>compiling a kernel, the other was while running portupgrade. Not
>sure what the straw is that breaks the back here, so I'm wondering if
>anyone has seen anything like this before and can perhaps shed some
>light on what might be happening, or perhaps give me some clues on
>how I can go about debugging/troubleshooting this.
>
>I've included a some output which will hopefully give a clear picture
>of how these guys are configured.
>
>While I appreciate everyone's input, please save yourself the trouble
>if your canned response would normally be something to the effect of
>telling me that Dell suck and I should use HP or IBM if I want to run
>FreeBSD.
>
>Thanks in advance!
>
>pciconf -lv:
>
>hostb0 at pci0:0:0: class=0x060000 card=0x016c1028
>chip=0x35908086 rev=0x09 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'E752x Server Memory Controller Hub'
> class = bridge
> subclass = HOST-PCI
>pcib1 at pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086
>rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCI Express Port A0'
> class = bridge
> subclass = PCI-PCI
>pcib4 at pci0:4:0: class=0x060400 card=0x00000050 chip=0x35978086
>rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCI Express Port B0'
> class = bridge
> subclass = PCI-PCI
>pcib5 at pci0:5:0: class=0x060400 card=0x00000050 chip=0x35988086
>rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCI Express Port B1'
> class = bridge
> subclass = PCI-PCI
>pcib8 at pci0:6:0: class=0x060400 card=0x00000050 chip=0x35998086
>rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCI Express Port C0'
> class = bridge
> subclass = PCI-PCI
>uhci0 at pci0:29:0: class=0x0c0300 card=0x016c1028
>chip=0x24d28086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller'
> class = serial bus
> subclass = USB
>uhci1 at pci0:29:1: class=0x0c0300 card=0x016c1028
>chip=0x24d48086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller'
> class = serial bus
> subclass = USB
>uhci2 at pci0:29:2: class=0x0c0300 card=0x016c1028
>chip=0x24d78086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller'
> class = serial bus
> subclass = USB
>ehci0 at pci0:29:7: class=0x0c0320 card=0x016c1028
>chip=0x24dd8086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller'
> class = serial bus
> subclass = USB
>pcib9 at pci0:30:0: class=0x060400 card=0x00000000
>chip=0x244e8086 rev=0xc2 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6),
>6300ESB Hub Interface to PCI Bridge'
> class = bridge
> subclass = PCI-PCI
>isab0 at pci0:31:0: class=0x060100 card=0x00000000
>chip=0x24d08086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
> class = bridge
> subclass = PCI-ISA
>atapci0 at pci0:31:1: class=0x01018a card=0x016c1028
>chip=0x24db8086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
> class = mass storage
> subclass = ATA
>pcib2 at pci1:0:0: class=0x060400 card=0x00000044 chip=0x03308086
>rev=0x06 hdr=0x01
> vendor = 'Intel Corporation'
> device = '80332 [Dobson] I/O processor A-segment Bridge'
> class = bridge
> subclass = PCI-PCI
>pcib3 at pci1:0:2: class=0x060400 card=0x00000044 chip=0x03328086
>rev=0x06 hdr=0x01
> vendor = 'Intel Corporation'
> device = '80332 [Dobson] I/O processor B-segment Bridge'
> class = bridge
> subclass = PCI-PCI
>amr0 at pci2:14:0: class=0x010400 card=0x016c1028 chip=0x00131028
>rev=0x06 hdr=0x00
> vendor = 'Dell Computer Corporation'
> class = mass storage
> subclass = RAID
>pcib6 at pci5:0:0: class=0x060400 card=0x00000044 chip=0x03298086
>rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = '6700PXH PCI Express-to-PCI Express Bridge A'
> class = bridge
> subclass = PCI-PCI
>pcib7 at pci5:0:2: class=0x060400 card=0x00000044 chip=0x032a8086
>rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = '6700PXH PCI Express-to-PCI Express Bridge B'
> class = bridge
> subclass = PCI-PCI
>em0 at pci6:7:0: class=0x020000 card=0x016d1028 chip=0x10768086
>rev=0x05 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82547EI Gigabit Ethernet Controller'
> class = network
> subclass = ethernet
>em1 at pci7:8:0: class=0x020000 card=0x016d1028 chip=0x10768086
>rev=0x05 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82547EI Gigabit Ethernet Controller'
> class = network
> subclass = ethernet
>none0 at pci9:13:0: class=0x030000 card=0x016c1028
>chip=0x51591002 rev=0x00 hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'RV100 Radeon 7000 / Radeon VE'
> class = display
> subclass = VGA
>
>dmesg:
>
>ricky# dmesg
>Copyright (c) 1992-2006 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights
>reserved.
>FreeBSD 6.1-RELEASE-p3 #9: Wed Aug 9 10:07:40 EDT 2006
> root at RICKY.domain.tld:/usr/obj/usr/src/sys/RICKY
>ACPI APIC Table: <DELL PE BKC >
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.71-MHz K8-class CPU)
> Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
>
>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
>,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,
> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
> AMD Features=0x20100800<SYSCALL,NX,LM>
> Logical CPUs per core: 2
>real memory = 1073479680 (1023 MB)
>avail memory = 1028681728 (981 MB)
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>cpu0 (BSP): APIC ID: 0
>cpu1 (AP): APIC ID: 1
>ioapic0: Changing APIC ID to 2
>ioapic1: Changing APIC ID to 3
>ioapic1: WARNING: intbase 32 != expected base 24
>ioapic2: Changing APIC ID to 4
>ioapic2: WARNING: intbase 64 != expected base 56
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ioapic1 <Version 2.0> irqs 32-55 on motherboard
>ioapic2 <Version 2.0> irqs 64-87 on motherboard
>acpi0: <DELL PE BKC> on motherboard
>acpi0: Power Button (fixed)
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
>pci2: <ACPI PCI bus> on pcib2
>amr0: <LSILogic MegaRAID 1.53> mem 0xf80f0000-0xf80fffff,
>0xfe9e0000-0xfe9fffff irq 46 at device 14.0 on pci2
>amr0: Using 64-bit DMA
>amr0: delete logical drives supported by controller
>amr0: <LSILogic PERC 4e/Si> Firmware 521X, BIOS H430, 256MB RAM
>pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
>pci3: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
>pci5: <ACPI PCI bus> on pcib5
>pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
>pci6: <ACPI PCI bus> on pcib6
>em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
>0xecc0-0xecff mem 0xfe6e0000-0xfe6fffff irq 64 at devi
>em0: Ethernet address: 00:13:72:53:4a:04
>pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
>pci7: <ACPI PCI bus> on pcib7
>em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
>0xdcc0-0xdcff mem 0xfe4e0000-0xfe4fffff irq 65 at devi
>em1: Ethernet address: 00:13:72:53:4a:05
>pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>pci8: <ACPI PCI bus> on pcib8
>uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff
>irq 16 at device 29.0 on pci0
>uhci0: [GIANT-LOCKED]
>usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf
>irq 19 at device 29.1 on pci0
>uhci1: [GIANT-LOCKED]
>usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf
>irq 18 at device 29.2 on pci0
>uhci2: [GIANT-LOCKED]
>usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
>0xfeb00000-0xfeb003ff irq 23 at device 29.7 on pci0
>ehci0: [GIANT-LOCKED]
>usb3: EHCI version 1.0
>usb3: companion controllers, 2 ports each: usb0 usb1 usb2
>usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
>usb3: USB revision 2.0
>uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>uhub3: 6 ports with 6 removable, self powered
>uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
>uhub4: multiple transaction translators
>uhub4: 2 ports with 2 removable, self powered
>pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci9: <ACPI PCI bus> on pcib9
>pci9: <display, VGA> at device 13.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH5 UDMA100 controller> port
>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
>ata0: <ATA channel 0> on atapci0
>ata1: <ATA channel 1> on atapci0
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
>on acpi0
>sio0: type 16550A, console
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xec000-0xeffff on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
>isa0
>ucom0: Belkin USB PDA Adapter Belkin Components, rev 1.10/1.02, addr 2
>Timecounters tick every 1.000 msec
>acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33
>amr0: delete logical drives supported by controller
>amrd0: <LSILogic MegaRAID logical drive> on amr0
>amrd0: 139900MB (286515200 sectors) RAID 1 (optimal)
>SMP: AP CPU #1 Launched!
>Trying to mount root from ufs:/dev/amrd0s2a
>WARNING: / was not properly dismounted
>WARNING: /tmp was not properly dismounted
>WARNING: /usr was not properly dismounted
>/usr: mount pending error: blocks 16 files 2
>WARNING: /var was not properly dismounted
>em0: link state changed to UP
>em1: link state changed to UP
>
>Raid Configuration:
>
># megarc -ldInfo -a0 -Lall
>
>
>
>**********************************************************************
> MEGARC MegaRAID Configuration Utility(FreeBSD)-1.04
> (03-02-2005)
> By LSI Logic Corp.,USA
>
>**********************************************************************
> [Note: For SATA-2, 4 and 6 channel controllers, please
>specify
> Ch=0 Id=0..15 for specifying physical drive(Ch=channel,
>Id=Target)]
>
> Type ? as command line arg for help
>
>
> Finding Devices On Each MegaRAID Adapter...
> Scanning Ha 0, Chnl 0 Target 15
>
> *******Information Of Logical Drive 0*******
>
> Logical Drive : 0( Adapter: 0 ): Status: OPTIMAL
> ---------------------------------------------------
> SpanDepth :01 RaidLevel: 1 RdAhead : Adaptive Cache:
>DirectIo
> StripSz :064KB Stripes : 2 WrPolicy: WriteBack
>
> Logical Drive 0 : SpanLevel_0 Disks
> Chnl Target StartBlock Blocks Physical Target Status
> ---- ------ ---------- ------ ----------------------
> 0 00 0x00000000 0x1113e000 ONLINE
> 0 01 0x00000000 0x1113e000 ONLINE
>
>Kernel Config:
>
>machine amd64
>cpu HAMMER
>ident RICKY
>options SCHED_ULE # ULE scheduler
>options PREEMPTION # Enable kernel thread
>preemption
>options INET # InterNETworking
>options FFS # Berkeley Fast Filesystem
>options SOFTUPDATES # Enable FFS soft updates
>support
>options UFS_ACL # Support for access control
>lists
>options UFS_DIRHASH # Improve performance on big
>directories
>options CD9660 # ISO 9660 Filesystem
>options COMPAT_43 # Needed by COMPAT_LINUX32
>options COMPAT_IA32 # Compatible with i386 binaries
>options COMPAT_FREEBSD4 # Compatible with FreeBSD4
>options COMPAT_FREEBSD5 # Compatible with FreeBSD5
>options COMPAT_LINUX32 # Compatible with i386 linux
>binaries
>options SCSI_DELAY=5000 # Delay (in ms) before
>probing SCSI
>options SYSVSHM # SYSV-style shared memory
>options SYSVMSG # SYSV-style message queues
>options SYSVSEM # SYSV-style semaphores
>options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real- time
>extensions
>options KBD_INSTALL_CDEV # install a CDEV entry in /dev
>options ADAPTIVE_GIANT # Giant mutex is adaptive.
>device acpi
>device pci
>device ata
>device atadisk # ATA disk drives
>device atapicd # ATAPI CDROM drives
>options ATA_STATIC_ID # Static device numbering
>device scbus # SCSI bus (required for SCSI)
>device amr # AMI MegaRAID
>device atkbdc # AT keyboard controller
>device atkbd # AT keyboard
>device psm # PS/2 mouse
>device vga # VGA video card driver
>device splash # Splash screen and screen saver support
>device sc
>device sio # 8250, 16[45]50 based serial ports
>device em # Intel PRO/1000 adapter Gigabit
>Ethernet Card
>device loop # Network loopback
>device random # Entropy device
>device ether # Ethernet support
>device pty # Pseudo-ttys (telnet etc)
>device bpf # Berkeley packet filter
>device uhci # UHCI PCI->USB interface
>device ehci # EHCI PCI->USB interface (USB 2.0)
>device usb # USB Bus (required)
>device ucom
>device umct
>device ukbd # Keyboard
>device ums # Mouse
>options SMP # SMP
>device mem # lsof
>device io # lsof
>options IPI_PREEMPTION
>device mptable # Optional MPSPEC mptable
>support
>options DEVICE_POLLING
>options HZ=1000
>options ENABLE_ALART
>options ACCEPT_FILTER_HTTP # Apache accf_http module
>
>_______________________________________________
>freebsd-questions at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
>--
>This message has been scanned for viruses and
>dangerous content by MailScanner, and is
>believed to be clean.
>MailScanner thanks transtec Computers for their support.
>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
More information about the freebsd-questions
mailing list