Drive errors on boot

[Bryan Curl]

Hello group,

I get these errors on one of my ide drives on boot.
Other similar drives dont error and are setup the same in bios (except
cylinder & block config of course)
System and this drive seem to work fine otherwise. I re-fdisk this one but
it still does this error.

FreeBSD 6.0-RELEASE-p6 #0: Tue Apr  4 09:43:53 MDT 2006

ad1: 1916MB <Maxtor 72004 AP 2A3C0B31> at ata0-slave WDMA2
ad1: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>
LBA=3924359
ad1: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>
LBA=3924343
ad1: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>
LBA=3924356
ad1: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>
LBA=3924359

I  dont know what causes these errors either.

dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state

Any ideas / suggsted reading somewhere on this?
Thank You.


-------
Bryan
bc3910 'at' gmail 'dot' com