6.0 APCI Config & PMAP

[Don O'Neil]

How do I upgrade to 6-Stable... I ran sysinstall and did an upgrade, but
that left me back with 6.0-release. Do I need to do a 'make world', or is
there another upgrade method? Any references online? I've never done an
upgrade any other way than through sysinstall. 

-----Original Message-----
From: Donald J. O'Neill [mailto:donaldjoneill at gmail.com] 
Sent: Friday, March 31, 2006 7:38 PM
To: freebsd-questions at freebsd.org
Cc: Don O'Neil
Subject: Re: 6.0 APCI Config & PMAP

On Friday 31 March 2006 18:55, Don O'Neil wrote:
> I am 'burning in' some hardware and drives before putting them into 
> production using various tools (raidtest, etc...) and have a couple of 
> questions..
>
> Occasionally under high load when doing the raid test, I see:
>
> collecting pv entries -- suggest increasing PMAP_SHPGPERPROC
>
> What does this mean, and what should I change it to to correct the 
> problem? I also get the occasional error that it couldn't write to the 
> device (twed) ... Everything seems to work ok though.
>
> Also, my motherboards APCI is horribly broken, I can boot ok without 
> APCI if I select option 2 from the boot menu (it's a 'stock' 6.0 
> install). How do I configure the system to boot without APCI 
> automatically?
>
> Thanks!
>
> _______________________________________________
Moving to 6-STABLE should fix APCI. It's about the first thing I do. 
After that, no problems with APCI.

Don